ReviewsInside Grooving Bars

3/8\ Shank Grooving & Cut-Off Tool, High Speed Steel Inserts, A R Warner

  • For external grooving and cut-off operations.
  • Includes two 1/16" (.062") groover T-15 high speed steel inserts.
  • Includes two 1/32" (.031") groover T-15 high speed steel inserts.
  • Includes one 1/64" (.016") groover T-15 high speed steel insert.
  • This lathe grooving tool includes two IS 3007 screws and one T-9 wrench.
Check Stock

Sandvik Coromant CoroCut 1-Edge Carbide Grooving Insert, 90 Degree Offset, GS Geometry, GC1115 Grade, Multi-Layer Coating, 1 Cutting Edge, RG123H1-0200-0002-GS, Right Hand Cutting, 0.079\ Cutting Width, 0.0079\ Corner Radius, H Insert Seat Size (P...

  • Used with the Sandvik Coromant CoroCut 1-2 for external deep grooving in stainless steel.
  • GC1115 grade is a physical vapor deposition (PVD) coating of titanium aluminum nitride (TiAlN) and chromium oxide (Cr2O3) over carbide that provides wear resistance without limiting shock resistance in average-to-good machining conditions.
  • GS chipbreaker has sharp cutting edge for deep grooving at low feed rates.
  • For use with rail-shape clamp toolholders for security.
  • One cutting edge and a right-hand 90-degree offset angle for difficult-to-access grooving areas.
Check Stock

HFS (R) Heavy Duty Indexable Grooving/Parting Holder with a Gtn-2 Tin Coated Carbide Insert (3/8''-1/2'')

  • For shallow precision grooving and profile/copy turning.
  • O-ring. snap-ring, relief grooving and high production.
  • The head of turning tool is screwed tightly and has high clamping force, which improves the insertion indexing accuracy..
Check Stock

WINSOON Adjustable Floor Guide for Sliding Barn Door, Wall Mount Bottom Hardware System for Closet Bypass Doors TV Stand

  • ... finish, works great to replace the plastic door guide, our sliding door guides mounts to the wall/closet, cause no damage to the floor, help prevent cabinet door from swinging/wobbling..
  • [ CONCEALED BARN STYLE ] - Universal door guides are simple & easy to use, the glide will slide invisibly through any bottom grooving door, avoid accidently kick on your feet/toes, leave no marks on the surface, keep the door clean and safer..
  • [ ADJUSTABLE FIT DOOR THICKNESS ] - WINSOON Barn Door Guide can also act as stay rollers, by create a “U” shaped adjustable channel that accommodate a thicker non- grooving door up to 1-1/2 inch, or grooving door 1-9/16 inch..
  • [ SLEEK DESIGN FLUSH BOTTOM ] - Flat head screws, and countersunk mounting holes ensure a flat contact surface, won’t scratch/stick door, complete flush bottom of the door guides make the installation so easy, also looks very elegant and clean..
  • [ PRODUCT INCLUDES ] - 1 Pcs Floor Guide, 2 Pcs Flat Head Screws (for mounting) + 2 Pcs Adjusting Screws, 2x Ribbed Plastic Anchors, PLEASE CHECK THE MEASUREMENT ON THE PICTURE BEFORE PURCHASING, comes with 5 years product warranty, any proven defects/missing components will get free replacement at first time, 100% satisfaction guaranteed..
Check Stock

Wheeler Scope Ring Alignment and Lapping Kit Combo, 1 Inch and 30mm Lapping Bars, Compound for Scope Mounting and Leveling

  • SPCES: Compatible with 1 inch and 30mm scope rings.
  • FUNCTION: Lapping the inside scope rings will reduce or eliminate any shifting of the scope inside the rings.
  • RELIABLE: Alignment bars provide the perfect alignment of both rings and will also diagnose any vertical or horizontal misalignments.
  • EASE OF USE: The short bars let you know when the front ring is in perfect alignment with the rear.
  • INCLUDES: Two 1 Inch Alignment Bars, One 1 inch Lapping Bar, Two 30mm Alignment Bars, One Lapping Bar Handle & 220 Grit Lapping Compound.
Check Stock

Sonor Global Beat MS GB Soprano Metallophone

  • Instrument range c2-a3 with 16 bars, including Bb and F# bars.
  • Special alloy bars with overtone or fundamental tuning.
  • Note name labels inside resonator box make it easy to put bars back in proper place.
  • All wood surfaces are protected with Proterra, an environmentally safe, all-natural varnish.
  • Includes storage bag for the accidental bars and 1 pair of Sonor SCH 23 felt-headed mallets.
Check Stock

Sonor Global Beat MA GB Alto Metallophone

  • Instrument range c1-a2 with 16 bars, including Bb and F# bars.
  • Special alloy bars with overtone or fundamental tuning.
  • Note name labels inside resonator box make it easy to put bars back in proper place.
  • All wood surfaces are protected with Proterra, an environmentally safe, all-natural varnish.
  • Includes storage bag for the accidental bars and 1 pair of Sonor SCH 23 felt-headed mallets.
Check Stock

THINBIT SFT12R 1/2\ Right Hand, Straight, Flushtop toolholder. Use with Grooving, Threading, face Grooving and Parting Inserts

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Original THINBIT toolholder designed for manual, benchtop and jeweler lathes. Toolholder includes: C Clamp, S3808 Screw, P0308 Pin and W1005 Wrench..
  • This toolholder is compatible with grooving, threading, face grooving and parting inserts..
  • Use inserts beginning with 'S'. Use with Right Hand and centered inserts..
Check Stock

THINBIT SFT38R 3/8\ Right Hand, Straight, Flushtop toolholder. Use with Grooving, Threading, face Grooving and Parting Inserts

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Original THINBIT toolholder designed for manual, benchtop and jeweler lathes. Toolholder includes: A Clamp, S5608 Screw, P0308 Pin and W1005 Wrench..
  • This toolholder is compatible with grooving, threading, face grooving and parting inserts..
  • Use inserts beginning with 'S'. Use with Right Hand and centered inserts..
Check Stock

FomaSP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426 Lathe Grooving Cutting Tools 10pcs

  • Grey colors PVD coating, good for working steel, stainless steel, cast iron..
  • Size, Width(B): 4.1mm, Radius(R): 0.25mm, Longth(L): 11.3mm, fit for Korloy grooving holder..
  • General chipbreaker for grooving working, with better chip breaker, good material and more efficiency.
  • Long processing life, competitive price, high cost performance.
  • Has more than 15 years of experience in producing carbide inserts.
Check Stock

THINBIT LGS12R 1/2 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin..
  • This toolholder is compatible with grooving, face grooving, threading and parting inserts..
Check Stock