ReviewsInsulated Cord End Terminal

The TAB Battery Book: An In-Depth Guide to Construction, Design, and Use

  • SAE battery connector extension cable is heavy duty 10AWG wire which can reduce power loss, thick and durable. The inner core of the cable is made of high quality copper wire. Length: 60cm/2ft. Rated Voltage: 600V..
  • The SAE connector is equipped with a dust cap. When the cable is not in use, the dust cap covers the SAE connector to keep the inside of the connector clean and dry. Waterproof and dustproof. Thus extending the service life of the cable..
  • The other end is 0.32"/8mm Tin plated Ring Terminal. Comes with 15A, 20A, 30A fuses for electrical protection to meet your different needs. Heat and corrosion resistance, which can work normally in a wide voltage range of DC 12-24V..
  • Specially designed for extending car or motorcycle battery charging terminals, maintaining a trickle charge saves the battery. Not only can it be powered directly from the motorcycle's existing SAE socket, it can also be powered from the battery by connecting to a ring terminal extension cord..
  • Package include: 1 Pack SAE to ring terminal extension cable, 3PCS 15A/20A/30A fuses, 1PC SAE to SAE polarity reverse adapter..
Check Stock

Dinkle DSS2.5N-02P DIN Rail Terminal Block Press-Fit Jumper (Pack of 50)

  • Heavy Duty Safe UL 6 Gauge Battery Cable for Car Battery: Tinned copper wire has good electrical conductivity, thermal conductivity, stability, tin-plated copper can increase heat dissipation, improve electrical conductivity and improve wire performance. Red wire is positive while black is negative..
  • Battery Cables with Tin-plated Copper Terminal: Jumper cables kit for car with tin-plated copper has good stability, wear resistance, corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better..
  • PVC Insulated Jacket: Automotive replacement battery cables flexible PVC insulation of battery cables resists abrasion, waterproof and moisture proof, flame retardant and heat insulation, and withstands the rigors of an automotive or marine environment..
  • 2 BATTERY CABLES: This 6awg battery cable kit contain one 20inches positive (Red) and one 20inches negative (Black) power inverter cables. 3/8” ring terminal at each end. The Maximum operating current is 60A.
  • WIDE APPLICATION: The 6 gauge positive and negative cables are ideal for car automotive, solar, marine, RV, motorcycle, golf cart, lawn/garden equipment or power inverter batteries.
Check Stock

Channellock 959 8-1/2-Inch Wire Stripper with Crimper

  • Wire crimper tool kit contains 4 crimping die set..
  • This wire crimper tool is adjustable and replaceable..
  • It is easy to save energy when pressing and crimping..
  • Color code nests + Insulated Terminals 24-14 AWG (0.25-2.5mm²).
  • Cord end terminals 24-10 AWG (0.25-6.0mm²).
  • Non-insulated open barrel connector 26-16 AWG (0.14-1.5mm²).
  • MC4 solar connector terminals 14-10 AWG (2.5-6.0mm²)..
Check Stock

10 Pieces Pocket Screwdriver Set Double Ended Single Ended Pocket Clip Screwdriver Mini Pocket Screwdriver Tool for Home Office Car Gadgets Repair (Double Ended Style,6.3 Inch)

  • Insulated Screwdriver Flip-Blade has a #2 Phillips end and a 1/4-Inch Slotted end.
  • Securely and easily release the blade with a quick twist of the lock collar.
  • Interchangeable blades with a slim-tip to fit tight terminal blocks.
  • Handle and blade have a 1000-Volt insulation rating.
  • A layer of orange impact and flame resistant insulation protects from electric shock.
  • Meets or exceeds ASTM F1505 standards for insulation.
  • Cushion-Grip handles for greater torque and comfort.
Check Stock

Singer Sewing Machine Foot Pedal Replacement by Enduro – Variable Speed Foot Operated Control Pedal for Domestic and Imported Sewing Machines

  • Foot operated speed control pedal fits many popular brands of portable electric sewing machines..
  • CHECK THE PLUG BEFORE BUYING! If the plug on your existing pedal doesn't match the second photo on the left, this pedal will not work..
  • The plug end on this pedal is 1.25" wide and 3/8" tall, it has three evenly spaced terminal plugs in a horizontal position and the plug body is rounded around each terminal..
  • The cord is 52" long from the pedal to the machine, and 76" from the machine to the 110V wall plug..
  • The wall outlet plug is a standard Type-A, 110 volt, North American style two-prong plug..
Check Stock

Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends – Fits 3/8-inch and 5/16-inch Posts

  • DESIGNED FOR MARINE USE: Easily replace your boat battery’s terminal ends with a high-performance alternative..
  • RELIABLE: The Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends are three times more conductive than other terminal ends..
  • USABLE: The BAF-MT1 includes one positive 3/8-inch terminal end and one negative 5/16-inch terminal end..
  • BUILT GREEN: Meets the standards established for RoHS (Restriction of Hazardous Substances) compliance..
  • SUPERIOR CONSTRUCTION: The BAF-MT1 replacement Marine Terminal Ends feature heavy-duty zinc-plated construction..
  • LONG-LASTING QUALITY: Trust Schumacher Electric for reliable and well-made battery accessories. Schumacher has been producing quality automotive products since 1947..
  • EASY TO USE: The BAF-MT1 replacement terminal ends feature easy-to-tighten wing and hex nuts for a secure connection..
Check Stock

Fastronix 12 Terminal Power Distribution Block Kit

  • Rated to 240 Amps with a 1/4-20 Input Stud on a Nickel-Plated Bus Bar with 12 #8-32 Stainless Steel Terminal Screws.
  • 3/16" Mounting Holes on Each Side of Terminal Block.
  • Includes 12 Premium Double Crimp Nylon Insulated Ring Terminals.
  • Includes Hard Protective Cover (Red) and Flexible Stud Terminal Boot (Red).
  • Use with Fastronix Relay Panel (#900-004) and LED Fuse Panel (#500-043) for Professional, Protected Circuits.
Check Stock

URBEST 5Pcs Terminal Block 4 Position Dual Row Screw Covered Strip 600V 25A with 400V 25A 4 Position Pre Insulated Terminal Barrier Strip Red/Black 10Pcs

  • Barrier Terminal Block Species: Material : Metal, Plastic.
  • Block Size : 68 x 30 x 19mm/ 2.7" x 1.2" x 0.75".
  • Fork Terminal Strip Species: Material : Brass, PVC.
  • Terminal Stripe: Inside Width : 3.8mm/0.15".
  • Easy to use: The fork terminal stripe can be cut in any position to meet with your different demand, very handy.
  • Package Included: 5pcs dual row terminal block, 10pcs insulated terminal strip(black and red).
Check Stock

SEALY Electric Throw Blanket, Flannel & Sherpa Heated Throw with 6 Heating Levels & 2-10 Hours Auto Shut Off, Fast Heating & Machine Washable, 50x60 Inch, Light Grey

  • 【Fast Heating & Overheat Protection】 Sealy heated blanket throw heats up quickly, programmed with a pre-heat procedure for quick heat distribution when you turn on, and revert automatically to the last comfort level setting used after 15 minutes upon restart. High quality insulated heating wire helps monitor real-time temperature and prevent from overheating, soft and flexible wire with even heat distribution, ensure safer user experience and further leaves you peace of mind. Whether it is for home use, or as a Christmas gift for children and parents, it is very suitable..
  • 【6 Heat Settings & Auto Shut Off】 Sealy electric blanket heated throw is controlled by cycling through 6 preset heating levels to provide the most comfortable level (95-113°F), built in continuous sensing technology to monitor and adjust temperature to be maintained at your setting heat level. With adjustable 2-10 hours auto shutoff time settings for the desired functioning time..
  • 【Premium Quality】Sealy electric heated throw is made of 100% polyester, lined with silky & solid flannel and sherpa, which provides a greater comfort level by soft touch, warming throw blanket 50....
Check Stock

AGVEE 3.3ft Lightning Extension Cable, Braided Female to Male Extender Full Function Cord Compatible with iPhone iPad, Data Sync Video Audio & Charging Charger Connector Adapter, Dark Gray

  • ⭕[Exquisite Workmanship & Intimate Details] Aluminum alloy shell by micro-arc oxidation process makes the shell surface harder and more wearable. Strict quality inspection standards, fine appearance details, refuse to be shoddy. All components are made of environmentally friendly materials..
  • ⭕[Reinforced terminal & Durable Cable] Due to the structure of the lightning terminal, there is a place that is particularly fragile and easy to break. We have made special strengthening treatment in this place to solve this problem, it's three times stronger. Manufacture in strict accordance with industry standards, without cutting corners. Powered by quality tinned copper conductors. 15000+Bend Tested. Premium TPE ensure extreme temperatures (-50℃) without cracking..
  • ⭕[Hussle Free In-Case Charging] The minimum size of the output 8-pin end design is slim enough to compatible with most of waterproof cases. Just plug and charge without removing the iPhone iPad case..
  • ⭕[Compatibility]: This extender cord compatible with iPhone 14 13, 12, 11 series, XS XR X 8 7 6 5 series, iPad Pro 10.5', iPad Pro 12.9', iPod and other lightning socket devices..
Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock