ReviewsInsulated End Terminal

Fastronix 12 Terminal Power Distribution Block Kit

Rated to 240 Amps with a 1/4-20 Input Stud on a Nickel-Plated Bus Bar with 12 #8-32 Stainless Steel Terminal Screws.
3/16" Mounting Holes on Each Side of Terminal Block.
Includes 12 Premium Double Crimp Nylon Insulated Ring Terminals.
Includes Hard Protective Cover (Red) and Flexible Stud Terminal Boot (Red).
Use with Fastronix Relay Panel (#900-004) and LED Fuse Panel (#500-043) for Professional, Protected Circuits.

Barrier Terminal Block Species: Material : Metal, Plastic.
Block Size : 68 x 30 x 19mm/ 2.7" x 1.2" x 0.75".
Fork Terminal Strip Species: Material : Brass, PVC.
Terminal Stripe: Inside Width : 3.8mm/0.15".
Easy to use: The fork terminal stripe can be cut in any position to meet with your different demand, very handy.
Package Included: 5pcs dual row terminal block, 10pcs insulated terminal strip(black and red).

Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
50-series (35-50mm, #2-1/0, P/N 129527/129526).
70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.

Compatible with CAT, HITACHI, SIERRA MARINE, YANMAR and many more... Please verify your OEM part number from your original unit to help ensure fitment..
Replaces: HITACHI: LR180-03B LR180-03C LR18003 LR18003A, SIERRA MARINE: 18-6297 18-6929 186278, YANMAR: 119573-77201 129470-77200 11957377200, ITEM DESCRIPTION: ALTERNATOR, UNIT TYPE: HITACHI, VOLTAGE: 12, AMPERAGE: 80, FAN: EXTERNAL, REGULATOR: INTERNAL, REGULATOR CLOCK: 12:30, GROOVES: 1, PULLEY OD: 2.913IN / 74MM, PULLEY SPECIFICATIONS: 1/2" BELT WIDTH PULLEY, MOUNTING EAR 1: M8-1.25 THREADED, MOUNTING EAR 2: 10.5MM UNTHREADED, MOUNTING EAR 3: ....
Replaces: 10.4MM UNTHREADED, MOUNTING EAR THICKNESS 1: 0.551IN / 14MM, MOUNTING EAR THICKNESS 2: 0.551IN / 14MM, MOUNTING EAR THICKNESS 3: 0.591IN / 15MM, B+ TERMINAL: M5-0.8, POLARITY: INSULATED, TERMINAL ID: LIGHT / RELAY, SPECIFICATIONS: FULLY INSULATED, SPECIFICATIONS: THE RELAY TERMINAL VOLTAGE IS 1.25V STATIC AND BATTERY VOLTAGE WHEN RUNNING, SPECIFICATIONS: BLUE WIRE IS STATOR VOLTAGE, WEIGHT: 13.52 LBS / 6.14 KG, ....
Computer tested for consistent Quality and unsurpassed reliability.
Alternator - Voltage: 12V Amperage: 80 Amps Fan: External Regulator: Internal Grooves: 1 Source: Aftermarket.

Use these terminals when special performance or installation characteristics are not needed..
Non-insulated terminal series is the most economical terminal available..
Rated to 600 volts maximum, building wire.

Cooper&Hunter Unassembled Metal Wall Sleeve And Exterior Grille for Packaged Terminal Air Conditioners. Coated, Insulated, Including Condensate Drain Kit. Actual size 41 ⅞” x 16 ⅜” x 15 ¼”.
Designed especially for Cooper&Hunter PTAC but can be used with other Packaged Terminal Air Conditioners using standard 42"x16" size.
This wall sleeve is insulated for thermal efficiency and noise reduction. White powder coating matches PTAC units.
Wall Sleeve ships flat and requires assembly. Due to the production process painting might have small imperfections or marks..
Easy, one-person installation. Exterior grille is included. Order is shipped in two different packages.

【8-Inch Self-adjusting Wire Stripper】 Features with 3-in-1 multi-functions: stripping, cutting and crimping. With innovative self-adjusting mechanism, the conductor can be reliably stripped by adjusting the accuracy of cutting blade, which is ideal for copper and aluminum cables from 10-24 AWG.
【8-Inch Multi-Tool Stripper】 Induction hardened cutting edge stays sharp longer, pliers style nose allows wire stripper to pull and loop in wire, wire crimper crimps insulated and non-insulated terminals.
【High-Quality Material】Made of high-quality steel which is heat treated, polished, and black oxidation processed, making it more durable and sufficient to deal with hard stripping work.
【Set Includes】One piece of 8-inch self-adjusting wire stripper and one piece of 8-inch multi-tool wire cutter.
【Wide Applications】Ideal for industrial, electrician and domestic use. It is suitable for stripping, cutting, and insulated terminal crimping of copper wire, aluminum wire, sheathed core wire, cable, multiple sheathed wires, bare terminal.