ReviewsInsulating Glass Equipment

Speakon to Speakon Cables 2 Pack by FAT TOAD | 50ft Professional Pro Audio Green Speaker PA Cord with Twist Lock Connector | 12 AWG Wire for Impeccable Studio Recording & DJ Stage Performance Gear

  • ...h a crisp, clean sound that will help bring out the best in most any Speakon compatible sound equipment..
  • SPEAKER CORDS INSTALLED WITH RUGGED AND BUILT TO LAST LARGE 8.5MM RUBBER JACKET: These 50-foot Fat Toad Speakon speaker DJ cables are tough. Our Speakon DJ audio cables are encased with a thick and durable 8.5mm insulating rubber jacket. This durable insulating jacket not only helps protect your studio speaker cables from damage, but it also insulates them from outside static interference usually caused by electrical wires or other sound equipment..
  • STAGE SPEAKER CABLES WITH DURABLE TWIST LOCK SPEAKON TO SPEAKON CONNECTORS: Speakon connectors are quickly becoming the new standard for professional-grade equipment. With the 50-foot Fat Toad male to male Speakon speaker cable and your compatible equipment, you’ll be ahead of the game. The Speakon connector’s twist-lock design means no more accidental disconnections or disruptions in sound. And its blue and black connectors make it easier to find in an already crowded wire box..
  • PA CABLES MADE FOR HIGH POWER AND DEMANDING APPLICATIONS : Most manufacturers recommend thicker cables for higher power and long-distance applications. These Fat Toad 12 AWG Speakon speaker cables fit that recommendation. Fa....
Check Stock

GOONSDS Insulation Electrical Board Bakelite Phenolic Board Sheet Laminate Raw Materials for Laboratory and DIY,300x300x5mm

  • ... phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS Bakelite Phenolic Board Sheet 2PCS Laminate Raw Materials for Laboratory and Electrical Machinery Parts,150x200x5mm

  • ... phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS 6 PCS Bakelite Board Laminate Raw Materials for Silicone Rubber Mold and Electrical Machinery Parts,100x150x3mm

  • ... phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS Bakelite Phenolic Board Sheet 10 Pieces Laminate Raw Materials for Silicone Rubber Mold, Length 100mm, Width 100mm,Thickness 4mm

  • ... phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

1/4 to 1/4 Male Jack Speaker Cables 2 Pack by FAT TOAD | 50ft Professional Pro Audio Red DJ Speakers PA Patch Cords | Quarter Inch 12 AWG Gauge Wire for Amp Music Studio Recording & Stage Gear

  • ... a crisp, clean sound that will help bring out the best in almost any compatible sound equipment..
  • SPEAKER CORDS INSTALLED WITH RUGGED AND BUILT TO LAST LARGE 8.5MM RUBBER JACKET: The 50 feet Fat Toad male to male ¼ inch speaker cables are tough. Our ¼ inch speaker cables are encased with a thick and durable 8.5mm insulating rubber jacket. This durable insulating jacket not only helps protect your wires from damage, but it also insulates them from outside static interference usually caused by electrical wires or other sound equipment..
  • PA CABLES WITH DURABLE 1/4 INCH MALE JACK CONNECTORS: The Fat Toad 50-foot ¼ inch speaker cable gives you the flexibility you need. Many pieces of pro-grade equipment are compatible with ¼ inch jacks. The 50-foot length thoroughly provides plenty of options for speaker placement.
  • DJ SPEAKER WIRE MADE FOR HIGH POWER AND DEMANDING APPLICATIONS : Most manufacturers recommend thicker cables for higher power and long-distance applications such as amp to speaker cable. These Fat Toad 12 AWG TS Male to male ¼ inch speaker cables fit that recommendation. Fat Toad quarter-inch audio cables are much thicker than standard speaker wires that are usually 16-18 gauge. The thicker DJ audio cables result in less resistance and bette....
Check Stock

1/4 to 1/4 Male Jack Speaker Cables 2 Pack by FAT TOAD | 25ft Professional Pro Audio Red DJ Speakers PA Patch Cords | Quarter Inch 12 AWG Gauge Wire for Amp Music Studio Recording & Stage Gear

  • ... a crisp, clean sound that will help bring out the best in almost any compatible sound equipment..
  • SPEAKER CORDS INSTALLED WITH RUGGED AND BUILT TO LAST LARGE 8.5MM RUBBER JACKET: The 25 feet Fat Toad male to male ¼ inch speaker cables are tough. Our ¼ inch speaker cables are encased with a thick and durable 8.5mm insulating rubber jacket. This durable insulating jacket not only helps protect your wires from damage, but it also insulates them from outside static interference usually caused by electrical wires or other sound equipment..
  • PA CABLES WITH DURABLE 1/4 INCH MALE JACK CONNECTORS: The Fat Toad 25-foot ¼ inch speaker cable gives you the flexibility you need. Many pieces of pro-grade equipment are compatible with ¼ inch jacks. The 25-foot length thoroughly provides plenty of options for speaker placement.
  • DJ SPEAKER WIRE MADE FOR HIGH POWER AND DEMANDING APPLICATIONS : Most manufacturers recommend thicker cables for higher power and long-distance applications such as amp to speaker cable. These Fat Toad 12 AWG TS Male to male ¼ inch speaker cables fit that recommendation. Fat Toad quarter-inch audio cables are much thicker than standard speaker wires that are usually 16-18 gauge. The thicker DJ audio cables result in less resistance and bette....
Check Stock

KK YB-ZB 1pair Set(4 Spade Plug & 4 Banana Plug) HiFi OFC Speaker Wire, Spade Plug to Pin Type Plug 1.5M(4.92ft)/3M(9.84ft)/5M(16ft), KK YB-ZB (3M(9.84ft))

  • ...h a crisp, clean sound that will help bring out the best in most any Speakon compatible sound equipment..
  • SPEAKER CORDS INSTALLED WITH RUGGED AND BUILT TO LAST LARGE 8.5MM RUBBER JACKET: These 50-foot Fat Toad Speakon speaker DJ cables are tough. Our Speakon DJ audio cables are encased with a thick and durable 8.5mm insulating rubber jacket. This durable insulating jacket not only helps protect your studio speaker cables from damage, but it also insulates them from outside static interference usually caused by electrical wires or other sound equipment..
  • STAGE SPEAKER CABLES WITH DURABLE TWIST LOCK SPEAKON TO SPEAKON CONNECTORS: Speakon connectors are quickly becoming the new standard for professional-grade equipment. With the 50-foot Fat Toad male to male Speakon speaker cable and your compatible equipment, you’ll be ahead of the game. The Speakon connector’s twist-lock design means no more accidental disconnections or disruptions in sound. And its blue and black connectors make it easier to find in an already crowded wire box..
  • PA CABLES MADE FOR HIGH POWER AND DEMANDING APPLICATIONS : Most manufacturers recommend thicker cables for higher power and long-distance applications. These Fat Toad 12 AWG Speakon speaker cables fit that recommendation. Fa....
Check Stock

TORRAMI Weather Strip 2 inch W X 1/8 inch T High Density Adhesive Foam Seal Tape Soundproofing Insulation Gasket for Door and Windows 16.5 Ft Length

  • MATERIAL :This is high density foam tape made from environmental friendly material CR foam, Neoprene, Easy to install for windows or doors with strong adhesive backing,Attaches well to plastic metal, glass, and other smooth surfaces..
  • SIZE:2 inch Wide x 1/8 inch Thick (total 16.5 feet).
  • MUTIFUNCTION: This weatherstrip Seal tape forming a barrier against drafts and humidity also keeps out dust, weather proof, oil resistance, resistant to corrosion, shock-absorbing, sound and heat insulation, anti-skidding and insulating etc..
  • WIDELY APPLICATION: The neoprene stripping has temperature resistance,it can work well from -50°C to 150°C, widely used in various door seal and window insulation, furniture protect, electrical cabinets, speakers, toys, handicrafts, sports equipment,automotive and marine uses..
  • ADJUSTABLE & FLEXIBLE:The window seal tape strip is easy to customize and cut to size with scissors or blade,and bend easily into any shape..
Check Stock

A-Team Performance - Heat Shield Tape - with PSA Ultra-Lightweight Self-Adhesive Heat Resistant Heat Reflective Thermal Tape 1.5\ x 15' - Roll Adhesive Backed Heat Barrier

  • Lightweight Insulating Tape — Uses woven glass fiber heat resistant matting and one mil aluminized materials making it an ultra-weightless cool tape.
  • Reflective Solution — A thermal insulating roll tape convenient for application on cables, hoses, wires, fuel lines, and other surfaces. It can also be used to wrap wirings, seal air boxes, cover seams, and secure panels..
  • Withstand Radiant Heat — It can sustain and screen off direct heat of 400 degrees Fahrenheit and radiant heat of up to 2000 degrees Fahrenheit.
  • Efficient Application — The strong adhesive back composite makes application quick and easy with a guaranteed long-lasting seal.
  • Package Inclusion — 1 x A-Team Performance Lightweight Aluminized Heat Shield Barrier Reflective Cool Insulating Tape Strong Self-Adhesive Seal 1.5" x 15' Roll.
Check Stock

Liquid Insulating High Temperature Glue, Liquid Electrical Tape, Waterproof Liquid Electrical Tape, Lamp Board Insulation Electrical Sealant Liquid Tape Paste (Black)

  • DURABLE AND HIGH TOUGHNESS - In the case of the same capacity, the insulating glue in liquid form is more durable. The liquid form is easy to stretch and has better shareability..
  • INSULATION AND SEALING - The liquid tape has a stronger sealing performance, which keeps the wires in an insulated state, prevents leakage, and protects personal safety..
  • EASY TO USE - There is no need to cut or paste, just apply liquid glue to the place that needs to be repaired, and then leave it for four hours to complete the repair..
  • Application - bonding of electronic components, electrical equipment, sealing semiconductor materials, electric heaters, electronic instruments, etc..
  • APPLICABLE THROUGHOUT THE YEAR -The insulating glue is resistant to high and low temperatures, and the working temperature is between -30℃ and 300℃, which can adapt to most working environments..
Check Stock