ReviewsInsulation Tube

uxcell 30pcs 1.7mm Dia Ceramic Tube Insulated Electronic Wire Bundle Heat Insulation Protection Double Bore

  • Package: 30pcs x High-Temperature Resistant Insulating Ceramic Tube..
  • Length: 26mm/1''. Bore Diameter: 1.7mm/0.06''. Max OD: 6mm/0.23''. Color: White.
  • Advantage: Resistance to high temperature, heat resistance, temp up to 1600 Celsius(2912 °F), 1000 insulation voltage, high corrosion resistance..
  • Tips: Avoid the ceramic from breaking to scratch your hands, it is recommended that you wear gloves for installation..
  • Application: It can be used for insulation protection of cable bundle, ceramic bead electronic wires, for heat insulation and protection of electric wire, widely used in electric heating elements, protection sheaths, insulators, etc..
Check Stock

12 Pack Pipe Insulation Foam Tube Pre Slit Self Adhesive Foam Pipe Covers Polyethylene for Outdoor Indoor Water Pipe Pipeline (0.8 Inch)

  • Sufficient Quantity: you will receive 12 pieces of pipe insulation foam tubes, with the size of 2 cm/ 0.8 inch in diameter of the middle hole, 1 cm/ 0.4 inch in thickness, 40 cm/ 15.7 inch in length, ample quantity can meet your using needs.
  • Quality Material: the foam pipe insulation is made of foam, with flame retardant on the surface to prevent fire, safe and reliable to use.
  • Self Adhesive: the water pipe insulation tube is self adhesive, will form tightly seal after removing the protective paper, not easy to fall, reassuring to use.
  • Practical Function: the outdoor pipe insulation cover is suitable for hot and cold pipes, which can save resources by stopping condensation, and can prevent heat loss, fitting to prevent water pipes from freezing in winter and sweating in summer.
  • Convenient to Use: the foam insulation tubing is equipped with the pre cutting slit, which makes it easier to open and install on the pipe, bringing much convenience for your installation.
Check Stock

Universal Air Conditioning HA10900C Auto Part

  • 1.12mm Thickened and Wear-resistant Material: The 700x35-43C road bike tubes made of 1.18mm thickened butyl rubber are durable and wear-resistant,also heat resistant and shockproof, featuring electrical insulation and good air-tightness and preventing tire blowout..
  • Useful Accessories: The bicycle inner tubes set is equipped with 2 nylon rim strips which are installed between bicycle tube and rim, protecting tube from pierce by spoke during trip, also with 3 ABS tyre levers to help remove tube easily..
  • Easy to Replace Bike Tube: The bike tubes with rim strips and tyre levers are easy to install, and you can replace old bike inner tubes effortlessly and quickly within minutes, which are time-saving and efficient..
  • Universal Fit: The bike tubes are compatible with 700x35C, 700x36C, 700x37C, 700x38C, 700x39C, 700x40C, 700x41C, 700x42C,700x43C bike tire tubes. And the bike tubes feature even thickness for smooth usage..
  • Enjoy Safe and Comfortable Riding: The bicycle tube with tyre lever is equipped with 48mm lengthened schrader valve and valve cap, absorbing shocks on bump road and providing comfort and safe riding experience..
Check Stock

5Aplusreprap 12V 40W Heater Cartridge Wire 3D Printer Accessories Heating Tube 6x20mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-Head Extruders 3Pcs

  • Package Include: 3pcs 12V 40W Heater Cartridge 620 Heating Tube.
  • Features: Small tolerance, long service life, multi-process manufacturing, high insulation.
  • Selected Materials: Seamless stainless steel tube, high quality magnesium rod, high temperature resistant Teflon wire, high insulation, multi-process....
  • Detail: Adopt advanced equipment, fully automatic CNC wire winding, high precision, can evenly heat up, longer life..
  • Suitable for V6 Hotend Volcano MK8 MK9 CR10 3D Printers.
Check Stock

uxcell Battery Wrap PVC Heat Shrink Tubing 50mm Flat for 18650 Power Supply 5m Blue

  • This PVC heat shrink tube is a great items for protecting and repairing the cover..
  • Shrinking Rate: 48%(cross section)and 5%(longitudinal).
  • Insulation, stable performance and fast shrinkage..
Check Stock

TUQI Portable Stainless Steel Solar Stove Oven Smokeless,All Seasons Sun Cooker BBQ Grill Picnic Food Heater Kebab

  • ★No need for fuel or electricity. As long as there is sunshine, you can cook delicious food. No naked flame or smoke.
  • ★The mirror aluminum plate is used to reflect sunlight to the tube, so the tube will gather the heat rapidly and roasting.With the help of this Solar Cooker you will have the ability to cook a meal within 20 minutes under sunny skies..
  • ★With vacuum tube cooking chamber, food will be evenly heated. Don’t worry about scorching. Season the food in advance , then put them into food tray..
  • ★Vacuum tube cooking chamber provides insulation to keep heat in and cool out. It is so safe to touch that children can enjoy cooking as well. Each part can be washed by water.But do not attempt to clean the cooking tube until it has cooled down..
  • ★It is safe to be used in such occasions as balcony, park, beach, and field.It’s good for Camping BBQ..
Check Stock

uxcell 2Meters 85mm Width PVC Heat Shrink Wrap Tube Blue for 18650 Battery Pack

  • This PVC heat shrink tube is a great items for protecting and repairing the cover..
  • Shrinking Rate: 48%(cross section)and 5%(longitudinal).
  • Insulation, stable performance and fast shrinkage..
Check Stock

2 Pcs 3/4 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Cable Protector by YUKSY (4ft, Black & Red)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 3/4" in diameter large heat shrink tubing black and red (Note: it is 3/4" in round diameter, but not 3/4" in width). Other sizes also a....
Check Stock

Bushwhacker Olympia Insulated Bicycle Water Bottle Holder w/ 28 Ounce BPA Free Bottle - Mounts with Straps No Tools Hardware Screws Required - Attaches to Top Down Seat Tube - Bike Cage Cycling Mount

  • Attaches to bicycle frame with two hook and loop straps backed with nonslip material..
  • No tools hardware or screws required. Mounts to top tube, down tube, or seat tube..
  • Half inch insulation keeps water cool. 28 ounce BPA free water bottle included..
  • Dimensions: 10.5" height x 3.5" diameter.
  • Great off the bicycle for use on lawnmowers, strollers, at the gym, or on any tube 1-2 inches in diameter..
Check Stock

Fielect 5Pcs 3mm x 1.5mm Black Plastic Antenna Pipe Tube Protectors Receiver Aerial for RC Model Car

  • 【Parameters】- Outer diameter: 3mm/0.12".
  • 【Advantage】- Receiver antenna tube has insulation effect,keeping the antennas out of harm away while not breaking in a crash..
  • 【Feature】- RC antenna tube helps making receiver antenna fixed proper angle to achieve best signal..
  • 【Application】- Antenna pipe tube is compatible with DIY RC model, such as RC boat toy ,RC vehicles and so on..
  • 【Package Contents】- 5Pcs x RC Model Car Antenna Pipes.
Check Stock

Magic&shell 4PCS B9A Ceramic 9 Pin Gold PCB Tube Socket for 12AX7/ECC83/6922/6n11

  • High quality gold plated 9 pin B9A tube sockets..
  • Suitable for 12AX7, 12AT7, 12AU7, ECC83, ECC82, E88CC 6922 6p1 6p14 6n1 6N2 6N3 6n11 etc..
  • Working Voltage: 1500V.Contact Resistance: greater than 0.01 ohm.Insulation Resistance: less than 10000Mohm..
  • Pitch: 18.5mm/0.73Inch.Tube Base Copper Foot Diameter: 1.2mm/0.05Inch..
  • Tube Diameter: 18mm/0.71Inch.Hole Diameter:: 18.5mm/0.73Inch..
Check Stock