ReviewsIntake Manifold Gasket Kit

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

GOOFIT Fuel Filter 90 Degree Bent Intake Manifold Pipe with Intake Manifold Gasket Spacer Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler

  • Size:Intake Manifold Pipe:Inside diameter:18mm/0.71",27mm/1.07",Mounting hole 45mm/1.78".
  • Gasket Spacer:Opening diameter:19mm/0.75",distance between....
  • Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler.
  • Replacement for 50cc 70cc 90cc 110cc horizontal engine ATV scooter carburetor.
  • Package including:Fuel Pump Petcock x 1pc,Intake Manifold Pipe x 1pc,Gasket Spacer x 1pair,GOOFIT keychain x 1pc.
  • Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock

Intake Manifold w/Runner Control Valve & Air Pressure Sensor Compatible with 09-17 Dodge Journey Avenger/Jeep Compass Patriot/Chrysler Sebring 1.8L 2.0L 2.4L Part# 4884495AK 4884495AH 911-902

  • ...ble marerial to meet or exceed OE standard quality and performance requirements. ✴ The gasket with upgrade materials to ensure a perfect seal with no risk of leaking. ✴ Heat stabilized nylon providing better resistance to cold/hot cycles and further prevent any chances of cracking..
  • ✔ 【PACKAGE】1 pcs Intake Manifold kit Includes: 1 * NEW Intake Manifold with Gasket + 1 * NEW Flow Control Valve & 1 * NEW Air Pressure Valve with Bolts and washers【NOTE】 Please reference to the first picture as shown..
  • ✔ 【EXCAT MATCH】 Engines: 1.8L/ 2.0L/ 2.4L ✴ 2007-2010 Jeep Patriot, Jeep Compass, Dodge Caliber ✴ 2011-2017 Jeep Patriot, Jeep Compass, Dodge Caliber - 2.4L ✴ 2007-2010 Chrysler Sebring & Dodge Avenger - 2.0L 2.4L ✴ 2009-2011 Dodge Journey Engine - 1.8L, 2.0L, 2.4L (Pls check detailed fitment in the product description below.).
  • ✔ 【OE NUMBERS】 4884495AK/ 4884495AH/ 4884495AI/ 4884495AJ/ 4884495AC/ 4884495AD/ 4884495AE/ 4884495AF/ 4884495AG/ 911-902.
  • ✔ 【PURCHASE WITH CONFIDENCE】In BSOC AUTO Store, right parts are guaranteed. If you are not sure about the vehicle fitment or the part ever fails on your vehicle after purchase, please contact us and we’ll take care of it. 30 Days money back and one years replacement warranty ....
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

ATP Automotive 106007 Engine Intake Manifold

  • Re-engineered replacement intake manifold for Ford engines.
  • Heat stabilized nylon increases plenum durability and resistance to heat.
  • Matches OE runner profiles to ensure drivability and performance are not compromised.
  • Updated gasket design locates gasket on flange, compatible with OE gaskets.
  • Includes brackets, hardware and new thermostat.
Check Stock

Edelbrock 2181 Performer Intake Manifold

  • Delivers improved throttle response over stock intakes and are available in both EGR and non-EGR styles.
  • When using a 12-bolt manifold on 16-bolt heads, 16-bolt intake gasket is used to ensure proper sealing around the water ports on the heads.
  • Factory composition-type embossed gasket also works satisfactorily.
  • Boosts torque over a wide RPM range, from idle to 5, 500 RPM.
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

Mota Performance A40252 Manifold Heat Spacer Kit - 1\ Ford GT40

  • Manufactured from heat resistant phenolic resin.
  • Cooler and denser upper intake air improves throttle response and performance.
  • Manufactured from heat absorbing phenolic resin.
  • Insulates Throttle Body and Manifold from engine heat.
Check Stock

Mota Performance A40250 Manifold Heat Spacer Kit - 1/2\ Ford GT40

  • Manufactured from heat resistant phenolic resin.
  • Cooler and denser upper intake air improves throttle response and performance.
  • Manufactured from heat absorbing phenolic resin.
  • Insulates Throttle Body and Manifold from engine heat.
Check Stock

A-Premium Left Exhaust Manifold Kit with Gasket Compatible with Nissan Frontier 2005-2019 Pathfinder 2005-2012 NV1500 NV2500 NV3500 2012-2021 Xterra 4.0L

  • 【Vehicle Fitment】This Exhaust Manifold Kit is Compatible with Nissan Frontier 2005-2019, NV1500/NV2500/NV3500 2012-2021, Pathfinder 2005-2012, Xterra 2005-2015---V6 4.0L.
  • 【Durable Construction】This exhaust manifold set is made of solid metal which can resist heat, cold, warping and corrosion, and restore engine proper operation.
  • 【Reference Number】The A-Premium Exhaust Manifold Kit's reference number: 674-947, 674947, 14002EA210, 14002EA21A. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this exhaust long tube headers is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock