ReviewsIntake Manifold Gasket Repair Kit

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock

MOTO988 Carb Joint Intake Manifold Boot For Kawasaki Bayou 250 2003-2011 Bayou 220 1988-2002

  • ★High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • ★Compatible Models: The carburetor intake manifold boot work with Kawasaki ATV Bayou 250 - KLF250 2003-2011 Kawasaki ATV Bayou 220 - KLF220 1988-2002.
  • ★Package content: You will receive these accessories after purchase: 1 x Intake Manifold Boot;1 x Gasket;2 x Screw.
  • ★Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
  • ★After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal..
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

GOOFIT Fuel Filter 90 Degree Bent Intake Manifold Pipe with Intake Manifold Gasket Spacer Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler

  • Size:Intake Manifold Pipe:Inside diameter:18mm/0.71",27mm/1.07",Mounting hole 45mm/1.78".
  • Gasket Spacer:Opening diameter:19mm/0.75",distance between....
  • Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler.
  • Replacement for 50cc 70cc 90cc 110cc horizontal engine ATV scooter carburetor.
  • Package including:Fuel Pump Petcock x 1pc,Intake Manifold Pipe x 1pc,Gasket Spacer x 1pair,GOOFIT keychain x 1pc.
  • Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock

Intake Manifold w/Runner Control Valve & Air Pressure Sensor Compatible with 09-17 Dodge Journey Avenger/Jeep Compass Patriot/Chrysler Sebring 1.8L 2.0L 2.4L Part# 4884495AK 4884495AH 911-902

  • ...ble marerial to meet or exceed OE standard quality and performance requirements. ✴ The gasket with upgrade materials to ensure a perfect seal with no risk of leaking. ✴ Heat stabilized nylon providing better resistance to cold/hot cycles and further prevent any chances of cracking..
  • ✔ 【PACKAGE】1 pcs Intake Manifold kit Includes: 1 * NEW Intake Manifold with Gasket + 1 * NEW Flow Control Valve & 1 * NEW Air Pressure Valve with Bolts and washers【NOTE】 Please reference to the first picture as shown..
  • ✔ 【EXCAT MATCH】 Engines: 1.8L/ 2.0L/ 2.4L ✴ 2007-2010 Jeep Patriot, Jeep Compass, Dodge Caliber ✴ 2011-2017 Jeep Patriot, Jeep Compass, Dodge Caliber - 2.4L ✴ 2007-2010 Chrysler Sebring & Dodge Avenger - 2.0L 2.4L ✴ 2009-2011 Dodge Journey Engine - 1.8L, 2.0L, 2.4L (Pls check detailed fitment in the product description below.).
  • ✔ 【OE NUMBERS】 4884495AK/ 4884495AH/ 4884495AI/ 4884495AJ/ 4884495AC/ 4884495AD/ 4884495AE/ 4884495AF/ 4884495AG/ 911-902.
  • ✔ 【PURCHASE WITH CONFIDENCE】In BSOC AUTO Store, right parts are guaranteed. If you are not sure about the vehicle fitment or the part ever fails on your vehicle after purchase, please contact us and we’ll take care of it. 30 Days money back and one years replacement warranty ....
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

ATP Automotive 106007 Engine Intake Manifold

  • Re-engineered replacement intake manifold for Ford engines.
  • Heat stabilized nylon increases plenum durability and resistance to heat.
  • Matches OE runner profiles to ensure drivability and performance are not compromised.
  • Updated gasket design locates gasket on flange, compatible with OE gaskets.
  • Includes brackets, hardware and new thermostat.
Check Stock

Edelbrock 2181 Performer Intake Manifold

  • Delivers improved throttle response over stock intakes and are available in both EGR and non-EGR styles.
  • When using a 12-bolt manifold on 16-bolt heads, 16-bolt intake gasket is used to ensure proper sealing around the water ports on the heads.
  • Factory composition-type embossed gasket also works satisfactorily.
  • Boosts torque over a wide RPM range, from idle to 5, 500 RPM.
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit (Studs, nuts, and washers.) , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

Mota Performance A40252 Manifold Heat Spacer Kit - 1\ Ford GT40

  • Manufactured from heat resistant phenolic resin.
  • Cooler and denser upper intake air improves throttle response and performance.
  • Manufactured from heat absorbing phenolic resin.
  • Insulates Throttle Body and Manifold from engine heat.
Check Stock

Mota Performance A40250 Manifold Heat Spacer Kit - 1/2\ Ford GT40

  • Manufactured from heat resistant phenolic resin.
  • Cooler and denser upper intake air improves throttle response and performance.
  • Manufactured from heat absorbing phenolic resin.
  • Insulates Throttle Body and Manifold from engine heat.
Check Stock