ReviewsIntake Valve Replacement

Injector Pressure Regulator Valve - IPR Valve - Compatible with Ford Trucks - Powerstroke 6.0L Diesel - E-350, Excursion, F-250, F-350 Super Duty - Replaces 5C3Z9C968CA, CM-5126, 5C3Z-9C968CA, AP63417

  • Replacement Injector Pressure Regulator Valve - regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus, being a critical component in your vehicle system..
  • Compatible Replacement for Ford 6.0L Vehicles - 2005 E350 Club Wagon | 2005 - 2010 E350 Super Duty | 2005 Excursion | 2005, 2006, 2007 F250 Super Duty | 2005, 2006, 2007 F350 Super Duty |. The injector pressure regulator valve can be located after removing the intake and the fuel filter housing above the engine which can be seen attached to the high pressure oil pump (HPOP)..
  • Replaces Part# 5C3Z9C968CA, 1846057C1, CM-5126, 5C3Z-9C968-CA, AP63417 - commonly found on popular F-250, F-350 Super Duty, E-350 and Excursion models with 6.0L V8 Diesel Powerstoke Engines including years 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then you may have a problem with your IPR valve..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, this inj....
Check Stock

5.3L AFM DOD Replacement Kit Lifters Camshaft Head Gaskets for 2005-2014 Buick Chevy Avalanche Silverado Suburban Tahoe Trailblazer Envoy Sierra Yukon V8

  • ... gasket, valve stem seals, intake manifold gasket, exhaust manifold gasket, front camshaft seal, o-rings, other small gaskets, 30 cylinder head bolts (20 long bolts: 100mm, 10 small bolts: 45mm), 8 AFM (active fuel management) hydraulic roller lifters, 8 NON-AFM hydraulic roller lifters, 4 AFM lifter tray w/ bolts, replacement dod camshaft (single bolt).
  • AFM kit fit for 2005-2007 Buick Rainier 5.3l V8, for 2005-2006 Isuzu Ascender 5.3l V8, for 2005-2009 Saab 9-7x 5.3l V8.
  • 5.3 head gasket kit for 2007-2013 Chevrolet Avalanche 5.3l V8, for 2007-2009 Chevrolet Avalanche 5.3l V8, for 2007 Chevrolet Silverado 1500 Classic 5.3l V8, for 2005-2013 Chevrolet Silverado 1500 5.3l V8, for 2007-2014 Chevrolet Suburban 1500 5.3l V8, for 2007-2014 Chevrolet Tahoe 5.3l V8, for 2005-2008 Chevrolet Trailblazer 5.3l V8.
  • AFM lifter and camshaft for 2005-2006 GMC Envoy Xl 5.3l V8, for 2005 GMC Envoy Xuv 5.3l V8, for 2005-2009 GMC Envoy 5.3l V8, for 2007 GMC Sierra 1500 Classic 5.3l V8, for 2005-2013 GMC Sierra 1500 5.3l V8, for 2010-2013 GMC Sierra 5.3l V8, for 2007-2014 GMC Yukon Xl 1500 5.3l V8, for 2008-2014 GMC Yukon 5.3l V8.
Check Stock

Skunk2 907-05-9051 Ultra Series Intake Manifold Spacer

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

OCPTY Intake and Position Actuator Solenoid (VVT) Variable Timing Solenoids Oil Control Replacement Fit for Hyundai Santa FE for 2.4L KIA Optima 2.0L 918022

  • Fitment: for GM Ecotec engines in 2.0L, 2.2L, or 2.4L displacements 2000-2010, for GM Ecotec VIN B,D,F,H 2.2L 2000-2009, for GM Ecotec VIN 5,B,P,V 2.4L 2006-2009, for Oldsmobile Alero, for Chevrolet Cavalier, for Pontiac Grand Am, for Saturn L100 L200 L300 LS LS1 LW1 LW200, for Pontiac Sunfire G5 G6, for Chevrolet Cobalt, for Chevrolet HHR, for Chevrolet Malibu, for Lexus Pursuit, for Saturn Sky..
  • Replacement Part Number: 12622329, 12615936. This is vehicle specific product, please make sure your car model and OE number before ordering..
  • Durable Material: Made of stainless steel, durable, solid enough and not easy to deform under pressure..
  • Measure: Intake Tool Head Diameter: 35.1mm / 1.38".
  • Exhaust Tool Head Diameter: 30.1mm / 1.19".
  • Good Performance: Easy installation. It is a good replacement for the old or broken one. Fits for the engine valve well..
Check Stock

ORAEVY 52.4mm Complete Cylinder Head Replacement for 4 Stroke 110cc Engine Chinese ATV Go Kart Dirt Bike Pit Bike Scooter Coolster TaoTao SSR

  • Perfect match：Fit for most Chinese made 4 stroke 110cc Engines,Compatible with TaoTao 110cc,SSR 110cc,Coolster 110cc ,Kazuma Falcon 110cc,Panda 100cc,Coyote 110cc,Redcat 110cc,Roketa 110cc,BMS 110cc ,Sunl 110cc.
  • Product parameter：Bore: 52.4mm /about 2.06'',Intake valve:23mm/0.91",exhaust valve:20mm/0.79",Timing Drive Sprocket-28 teeth.
  • Other parameters：Blot hole spacing(A):1.74".
  • Not Replacement for:Will not replace 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
  • Package includes:1*Complete Cylinder Head，1* set of complete cylinder gaskets，1*Bakelite mat，1*Exhaust pipe gasket，2*Exhaust pipe screws，1*A7 spark plug，1*pair free installation gloves.
Check Stock

WOOSTAR 57.4mm Big Bore Cylinder Head 65mm Valves Replacement for GY6 4 Stroke 125cc 150cc 157QMJ 152QMI Engine Chinese ATV 4 Wheeler Quad Buggy Go Kart

  • Fitment: Most Chinese made 4 stroke 110cc Engines, TaoTao Coolster ATV 110cc Pit Quad Dirt Bike Go Kart.
  • Compatible For: TaoTao 110||SSR 110||Kazuma Falcon 110||Panda 100||Lacoste 110||Coyote 110||Redcat 110||Roketa 110||BMS 110||Sunl 110||Coolster 110..
  • Intake valve: 23mm, exhaust valve:20mm, Timing Drive Sprocket-28 teeth..
  • Not Replacement For: 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves..
  • Tip: Please verify model number and size prior to ordering to ensure this is the correct part. Second, you need to adjust the ignition time in right with the magneto and timing sprokets,othewise exhaust valves will hit piston, make it bad situation,and even not working...If you still not understand,please contact us, i will send you an video..
Check Stock

Engine Pro Chevy SBC 350 5.7L HP 447/447 Lift Cam Camshaft L-79 327 OEM #3863151

  • ENGINE PRO MC1713 Hydraulic Flat Tappet Stage 3 Camshaft for 1958-1995 Small Block Chevrolet Engines - 262, 265, 267, 283, 302, 305, 307, 327, 350,....
  • Direct Interchange with OEM 3863151, 350HP - 327 CID, L-79, Factory Camshaft. OEM Sound, Fair Idle with Some Lope. Mid Range Torque of 2400-3200 RPM.....
  • Advertised Duration: Intake 290 Exhaust 290, Duration @ .050": Intake 222 Exhaust 222, Valve Lift: Intake 447 Exhaust 447, Lobe Separation: Intake....
  • Great for Mild Bracket Racing When Using Stock Automatic or Manual Transmissions in Engines With 10.25:1 or Less Compression. Computer Modifications....
  • Street or strip, Engine Pro Performance Camshafts simply out perform the competition. Our manufacturing accuracy promotes improved valve train....
Check Stock

BBK 1506 3/8\ Phenolic Intake Manifold Spacer Kit for GT-40 and Cobra EFI Intake Manifolds

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

Big Gun Exhaust 07-1132 ECO ATV Silver Slip On Exhaust for Honda,Brushed Aluminum with coated Black tip

  • Order Includes: 2x Intake Valves, 2x Exhaust Valves, 4x Valve Springs, 8x Valve Cotters.
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced..
Check Stock

BBK 1520 3/8\ Phenolic Intake Manifold Spacer Kit for Edelbrock Performer EFI 5.0L Intake Manifold

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

STARELO Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit VVT 12655420 12655421 compatible GM Chevy Malibu HHR Cobalt G5 G6 Saturn Buick Pontiac 2.0L 2.2L 2.4L

  • Premium Quality: Long life-span matters, high temperature viton O-rings enable prolonged sealing of valve..
  • A camshaft actuator solenoid, normally installed in the front of each cylinder head, is used to precisely control the flow of oil into the camshaft....
  • OBD Trouble Code: OBD Trouble Code caused will point to failed parts, P0010 (intake side circuit malfunction), P0011 (intake side actuator solenoid....
  • Fits the following vehicle models - With 2.0L / 2.2L / 2.4L engines: 2006 - 2010 Chevy Cobalt | 2006 - 2011 Chevy HHR | 2007 - 2009 Saturn Aura | 2008....
  • Replacement Part Number: Intake Solenoid # - 12655420, 12628347, 12646783, 12578517, 12679099, 917215, 917-215, 2T1014 | Exhaust Solenoid # -....
Check Stock