ReviewsIntegrated Float Switch Condensate Pump

HVAC Premium Condensate Removal Pump – Mute Box – Automatic Safety Switch Sensor - 100-240V AC 50-60Hz

  • HVAC Condensate Removal Pump With Automatic Switch – Automatically scans, detects, and collects/removes the condensate from HVAC or Air Conditioning Equipment, dehumidifiers, furnaces, condensing boilers, and virtually anywhere a condensing pump is necessary. Suitable for High Wall Mini Split Systems.
  • Pump Gallon is made of ABS plastic, Motor Shaft is made of High Quality Flame Retardant Metal that does not corrode, and the Tank Cover is also made of High Quality Flame Retardant Metal..
  • Pump includes Automatic Safety Switch which can be wired to an alarm to warn of possible tank overflow.
  • 100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked..
Check Stock

Dayton 1TDT2 Blower, 549 CFM, 115V, 2.05 Amp, 1640 RPM

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, equipped with safety switch.
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

HVAC Premium Condensate Removal Pump – Tank Pump 1.1L RTP15WS115L with 3/8' x 15' Pipe – Automatic Safety Switch Sensor - 115V/60HZ

  • HVAC Condensate Removal Pump With Automatic Switch – Automatically scans, detects, and collects/removes the condensate from HVAC or Air Conditioning Equipment, dehumidifiers, furnaces, condensing boilers, and virtually anywhere a condensing pump is necessary. Suitable for Ducted Units.
  • Pump Gallon is made of Flame Retardant ABS plastic, Motor Shaft is made of High Quality Flame Retardant Metal that does not corrode, and the Tank Cover is also made of High Quality Flame Retardant Metal.
  • Pump includes Automatic Safety Switch which can be wired to an alarm to warn of possible tank overflow.
  • Voltage is 115V/60Hz – See below in description for all TECHNICAL SPECIFICATIONS.
  • 100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked..
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

Little Giant VCMA-15ULS 115 Volt, 65 GPH, 1/50 HP Automatic Condensate Removal Pump with Safety Switch, White/Black, 554405

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, safety switch included.
Check Stock

Little Giant VCMX-20ULST NXTGen Condensate Removal Pump with Tubing (2 Pack)

  • VCMX 20ULST NXTGen condensate removal pump with tubing operates at 1.5 amps and 93 watts with thermal protection and safety switch for added peace-of-mind.
  • For removal of condensate from air conditioners, suitable for high efficiency, gas furnace condensations, and condensing boilers.
  • 1/30 HP high-performance motor pumps 84 GPH maximum.
  • Fully automatic with start, stop, and safety switch.
  • Includes mounting bracket for easy installation.
Check Stock

Little Giant VCMX-20ULST NXTGen High-Capacity Condensate Removal Pump (3 Pack)

  • VCMX 20ULST NXTGen condensate removal pump with tubing operates at 1.5 amps and 93 watts with thermal protection and safety switch for added peace-of-mind.
  • For removal of condensate from air conditioners, suitable for high efficiency, gas furnace condensations, and condensing boilers.
  • 1/30 HP high-performance motor pumps 84 GPH maximum.
  • Fully automatic with start, stop, and safety switch.
  • Includes mounting bracket for easy installation.
Check Stock

Briidea Hi-Lo Sump Pump Controller with Dual Float Switch and Overload Protection (White)

  • Compatible with all Sump pump and Utility pump(.
  • With adjustable position dual float switch, you can turn on/turn off your pump levels from 1/2'' to 20' effectively and precisely according to your actual needs, extends your pump life.
  • The dual float switch sensor is made of 304 stainless steel and is not affected by mineral or water debris. It has strong corrosion resistance and never needs to be cleaned.
  • Our pump controller can completely overcome the shortcomings of the traditional mechanical float switch which is prone to mechanical failure. Long life and small size,no moving parts in pit ensures reliability and is used in various application scenarios, stable and safe.
  • With smart button design, you can manually turn your pump on or off when needed! Sounds an alarm when pump is not working correctly，helps prevent water damage.
Check Stock

PumpSpy Automatic Condensate Pump - 173 GPH 1/20 HP - With Safety Switch and 20’ Tubing for HVAC, Dehumidifier, Furnace, Air Conditioner

  • Automatically detects and removes condensation from dehumidifiers, furnace, or AC - Condensate pump with a 1/20 HP high-performance motor that creates up to 18 feet of lift.
  • High-quality condensate pump for air conditioner, dehumidifier, or furnace.
  • Built-in safety switch that shuts off the connected unit’s power if the reservoir tank reaches an unsafe level.
Check Stock