ReviewsIntegrated Orifice Flowmeter

Ashford Traditional Single Drive/Unfinished Wheel

  • The world’s most popular spinning wheel for 70 years. Many optional accessories make this an extremely versatile wheel..
  • Includes: 4 Standard Single Drive Bobbins, Vertical Lazy Kate, Threading Hook, and Learn to Spin Booklet..
  • Single drive ratios 7, 9, 12, 17:1. Orifice: 3/8 inch (1 cm). Orifice: 3/8 inch (1 cm). Orifice Height: 27 1/4 inches (69 cm). Wheel diameter 22 inches (56cm). Weight: 17.5 lb (8 kg)..
  • Made from New Zealand Silver Beech (unfinished). Assemble required..
Check Stock

Tool Daily Pressure Washer Sand Blasting Kit, Wet Sandblaster Attachment, 2500 PSI, 1/4 Inch Quick Connect

  • Wet sand blaster for pressure washer is suction-fed injection of sand into water system..
  • Working pressure of pressure washer sand blaster attachment is up to 2500 PSI. Orifice 2.5. Max flow rate: 2 GPM. Temperature is up to 140°F/60℃. Please check image 6 to choose the size of orifice. If you need orifice 3.5 or orifice 3.0, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI”..
  • The pressure washer sand blasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 10’’ sand wand (sand input) and permanent nozzle (output)..
  • Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

GasOne Head Banjo High Pressure Propane Burner 10 in Heavy Duty

  • Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
  • BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
  • HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
  • HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.
Check Stock

G3/4\ Thread Hall Effect Liquid Water Flow Sensor Switch, DN20mm Counter Meter Used for Water Heaters, Water Dispenser, Water Purifier, Coffee Maker 2-45L/Min

  • Measurement Range: According to strict regulations, the measurement range of the flow switch is 60 (cubic meters/hour), which is large enough to meet daily needs..
  • Durable: The water flow sensor switch is made of high-quality brass material, which is durable and has a long service life..
  • Quality Assurance: This flowmeter has undergone strict quality control and testing, and the quality is guaranteed. Safe and reliable..
  • Practical: High-quality water flow meters can maintain high performance for a long time, and are convenient to use in real life and have strong practicability..
  • Wide Application: The flowmeter can be widely used in industrial automation, mechanical equipment, air compression industry, refrigeration, heating and ventilation and other fields..
Check Stock

XZT 3000psi(s16)-m22(Female) Pressure Washer Sewer Drain Hose,Sewer Jetter Hose Kit (50FT)

  • Sewer Nozzle Outside Diameter Max.: 0.76″( 19.2mm).
  • orifice: 1 Front(orifice is 1mm) 6 Back(orifice is 0.7mm).
  • Connector: compatible most pressure brand.
Check Stock

PWACCS Sewer Jetter Nozzle for Pressure Washer, Stainless Steel Drain Cleaning Tips for Power Washer, 3 Pieces, Button Nose Jet Nozzle, Rotating Flat Jetting Nozzle and Drain Jet Hose Nozzle, 5000 psi

  • Wild Application: The sewer jetter head kit has been widely used not only in industrials but also in daily lives. It is ideal to be used in cleaning kitchen sink, toilet, industrial pipe, indoor and outdoor plumbing..
  • Premium Material: The pressure washer sewer drain jet nozzle kit is made of durable stainless steel throughout, which is naturally immune to wear, corrosion, rust and oil. A best choice to accompany your whole life..
  • Button Nose Jet Nozzle: Orifice size is 4.0. This kind of jet nozzle is used to clean blockage and debris through one front spray orifice and 3 rear orifices..
  • Drain Jet Hose Nozzle: Orifice size is 6.5. Compared to button nose jet nozzle, this tip has more orifices in quantity (1 in front and 6 in rear), which means it need more power to maintain the same pressure and speed. But it can obviously provide more efficient cleaning..
  • Rotating Flat Jetting Nozzle: Orifice size is 4.5. This jetter nozzle only have 3 backward rotating spray. The location of each orifice make it spin when water runs. It is more destructive to blockages than any other nozzles.
Check Stock

CNYST Ultrasonic Flow Meter Liquid Flowmeter TUF-2000H with 3 Size Transducer for Pipe Diameter DN25 to 6000mm LCD Display Max Liquid Temperature 90 Degrees Celsius

  • ◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring..
  • ◆ High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%.
  • ◆ Non-intrusive measuring: Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.
  • with 3 size Sensor TS-2/ TM-1/ TL-1 Range: DN25~6000mm.
  • ◆ Large LCD display: Display: 4 line x 16 character LCD with backlight.
  • Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc..
  • ◆ Principle: transit-time ultrasonic flowmeter.
  • Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data.
Check Stock

VTSYIQI Handheld Ultrasonic Flow Meter Flowmeters HS-HM for DN15mm to DN300mm Pipe Size for Liquids Temperature Range -30℃ to 90℃ with Clamp On Sensors Transducers LCD Display

  • with Standard small bracket size: 318*59*85mm.
  • ◆High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%.
  • ◆Principle: transit-time ultrasonic flowmeter.
  • Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data.
  • ◆Large LCD display: Display: 4 line x 16 character LCD with backlight.
  • Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc..
  • ◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring..
Check Stock

Argon Regulator Dual Co2 Flowmeter by Manatee for TIG MIG Welder Gas and backpurge 60 SFCH - CGA 580 inlet connection and 5/8 x 18RH outlet fitting - Accurate Gas Metering Delivery System

  • ✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator Dual Flowmeter! Perfect for hooking....
  • ✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG TIG Welding Argon....
  • ✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more....
  • ✔ HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has....
  • ✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings..
Check Stock

FireDisc - Fire Power Orifice - Backyard Plow Disc Cooker | Portable Propane Outdoor Camping Grill

  • Looking for more power? Get the FirePower Orifice.
  • Adds the extra firepower you need for high-powered, boil-in-minutes cooking. Ideal for large boils or frying of crawfish and shrimp.
  • Regular power orifice should suffice for most recipes.
  • Heats food faster for larger groups and volumes.
  • The FireDisc FirePower Orifice is only compatible with FireDisc Cookers..
  • Can heat the FireDisc to boil and fry in just minutes.
Check Stock

Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles

  • Automotive A/C orifice tube remover tool kit allows removal of orifice tubes before flushing.
  • Speeds A/C service by removing the build-up of particulates on the orifice screen and restrictions that slow the flushing process.
  • The basic tool works on General Motors and Ford vehicles and comes with additional adapters for specific applications.
  • Ford: extender body for 1985 and newer models.
  • General Motors: 1989-91 GM 'J', 'L', and 'N' car adapter, and 1991 and newer 'C' and 'K' series truck adapter (for trucks with No. 3096068 orifices).
Check Stock