ReviewsIntegrative Electric Lamp Bracket

DGHAOP 10pcs Metal Recessed Light Spring Clips Recessed Lighting Trims 7.9\ Torsion Spring Recessed Lighting Accessories

  • High-quality lamp clips can effectively help you to install your lamps, suitable for all kinds of lamps, so that they can be firmly fixed on the ceiling..
  • The lamp bracket is made of alloy and adopts electroplating process, which can pass the salt spray test very well and has excellent elasticity.
  • just install it on the lamp and it can be used..
  • Specifications: The length is about 20cm (7.9in).
  • the wire diameter is about 1.2mm (0.05in).
  • a reasonable size is more suitable for your lamps..
  • Mechanical torsion spring can help you hold the lamp more firmly without frequent replacement.
  • The package contains 10pcs bracket hook springs.
  • the product is suitable for most surface mounted downlights on the market.
Check Stock

Bike Handlebar Flashlight Mount, Silicone Binding 360 Rotation Bracket, Wheel LED Light Headlight Tactical Bycicle Adjustable Clamp Grip, Small Torch Headlamp Holder with Clip for Biking Riding

  • ...icycle lights.With 8 shaped silicone strap, suitable for all kinds of pipe diameter of the bicycle, flashlight, can apply sound! Safe and reliable!Can be used to hold your flashlight or torch on your bicycle firmly, for convenient to ride a bike at night or in dark place.
  • 360°rotation: This bicycle flashlight torch bracket can rotate to adjust LED light's direction you want.
  • ADJUSTABLE & CONVENIENT - Use for bicycle headlights,bike led,bike led light,bike handlebars,bike headlights,pipe clamps,clip light,cycling bike,torch light,bicycle stand,bicycle handlebars,hook swords,led light stick,pipe bracket,pipe clamp,lamp clamp,lamp stand,lamp holder.Solves a problem with off-center mounting of lights, tapered handlebars that cock your light at an angle, and the need to adjust for different conditions (e.g., shorten up a light in fog or extend it for high speed at night).
  • 100% SATISFACTION CUSTOMER SERVICE - Use for clamp light,clamp lamp,bike handlebar,led clamp light,flash bracket,bike mount,bike stand,rail mounted flashlight,tactical headlamp,bike holder.Used for bicycle lights, flashlights installation on bicycle handlebars.Can be fixed in a lot of positions, convenient and save time.
  • Convenience: Quick release clamp easy to install on and off.
Check Stock

SKUNTUGUANG 5.75 Inch Motorcycle Headlights housing Bucket for Motorcycle Headlight (Headlight housing)

  • As long as the motorcycle has a lamp shell with 5.75 inch , it always can be modified.
  • With stainless steel mounting bracket, according to the situation of the front bracket choose to install or directly around the screw installation, the stainless steel corrosion-resistant, not easily deformed, more effectively improve the service life.
  • Note: All the pictures related to the headlights in the lamp shell are just for demonstrating the installation effect of the lamp shell and not for sale. If you need the related headlights, please contact customer servicer or visit the related products of our store..
  • Notice: Only Headlight housing bucket assembly, Not included LED headlight Instructions not included.
Check Stock

7 8 9 10 inch Lamp Shade Harp Holder,Adjustable Lamp Harp Set Fits E26 Light Base UNO Fitter Adapter and Saddle Base,with 2 Shade Attaching Finial Top,Silver Lampshade Harp Kit

  • ... as the toned finish is versatile that can match with other decorations easily.
  • Essential lamp accessory: this lampshade adapter holder with diamond enables you to fit a special style lamp shade on your lamp, enlarges your possibilities to use the lampshade of your choice, allows you replace a lamp shape that has no bracket, lyre, harp or structure to support a finial.
  • Just hang this lamp shade light bulb clip on a homemade lamp, then install a fabric, plastic or vinyl cover, which works for any shade lamp shade that has the spider, also for a small to medium lamp shade.
  • Reliable material: finial and lampshade levellers are made of metal, not easy to rust or break and stable, heat-resistant, bringing you a nice using experience.
  • They are simple lampshade attachments to use, just clip them onto the light bulb, and put a lampshade on top.
  • Size measurement: each lamp shade light bulb clip measures approx. 4.25 inches in height, proper size for you to use.
  • Before using a lamp shade, you can just clip this lampshade adapter holder on standard bulb without the use of a lamp harp, practical and convenient.
  • Wide applications: clip on adapter with matching top holds the shade on a regular shaped bulb and holds the cover in place without a bracket.
Check Stock

Floor Lamp by Cozylight, Giraffe Design 50nch Tall Standing Lamp for Kids' Bedroom, Hand-Stitched Toy Lamp Decorate The Cozy Living Room

  • Cute Element: The floor lamp is a giraffe design, which is high quality fabric with fluffy and soft card filling. It’s really cool to decorate your little one’s bedroom with kids’ lamp..
  • Adjustable Height: The floor lamps for bedroom can be adjusted in height from 51’’ to 39’’, which is more convenient for your reading. Stainless steel bracket adjustment ensures longer life..
  • Better lighting: The interface of our standing lamp is suitable for many bulb types: LED, Incandescent, Fluorescent (Order include an LED bulb). we suggest you using LED bulb 5W-12W, incandescent bulb 40W..
  • Stable & Safe: The lamp is integrated with high-quality stainless steel bracket and sturdy base make it safe to have around children and pets..
  • After-sale Guarantee: Our floor lamp can only be packed and shipped after strict quality inspection. If you are unsatisfied with any questions, simply contact us to replacement . No risk to buy! add to your cart now..
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Efficient shoe sanitizer machine and Boot Dryer,Gloves Hats Dryer Ski WithHeat Blower,Foot Dryer With Warmer Deodorizing

  • [Perfect design & bracket] Voltage:110V~50 Hz,The shoe dryer machine comes with a 200-watt high-quality hot air blower to generate warm air flow. The opening design on the top of the dryer bracket can help more warm air circulation, improve air circulation, quick drying electric shoe and improve shoe drying efficiency.
  • [Shoe dryer & deodorant] Boot dryer is suitable for shoes, gloves, hats made of leather, PVC, rubber, canvas, synthetic fiber, cotton, wool and other fabrics,boot warmer The shoe dryer can use hot air to eliminate the cause The peculiar smell of shoes caused by sweating will make your shoes boots and gloves dryer dry fast,clean and without peculiar smell.
  • [Electric Boot dryer & storage] The electric shoe dryer is light in weight and small in size and easy to store. Put the items (boots, shoes, gloves, hats, etc.) glove dryer tube of the dryer. After the drying is completed,fold and dry Rack and store it in a convenient place. The shoe dryer is easy to use, just plug in the power supply and turn on and off the rotary button of the dryer shoe.
  • [Perfect design & bracket] The shoe dryer machine comes with a 200-watt high-quality hot air blower to generate warm air flow. The opening design on the top of the dryer bracket can help more warm air....
Check Stock

Gusset Commer Grade .25x1.25x8

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

Nilight NI-KIT02 Front Frame License Plate Mounting Bracket Holder for Off-Road LED Work Lamps Lighting Bars,2 Years Warranty

  • Heavy-duty bracket: high-quality aluminum alloy material and advanced production process, The mounting bracket is impact resistant and anti-corrosion.
  • Mounting position: 4 different locations/methods to install the off-road lights. On the Bull bar, 2 Sets of mounting holes on top and 1 set in front.
  • Easy installation: no drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes.
  • Universal fitment: Fits for almost all car, Jeep, truck, Pickup, SUV, 4×4, etc. Work with most off road Auxiliary lights, fog lights, driving lights, LED work lamp and LED light bars.
  • Package include: 1Pc front license plate mounting bracket.
  • Heavy-duty bracket: high-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion.
  • Mounting position: 4 different locations/methods to install the off-road lights. On the bull bar, 2 Sets of mounting holes on top and 1 set in front.
  • Universal fitment: fits for almost all car, Jeep, truck, Pickup, SUV, 4×4, etc. Work with most off road aux....
Check Stock

Atron Picture Light 7'', for Paintings and Wall Art, White with 15 watts T6 Warm White Color Temperature Incandescent Bulb_PCT7W

  • Adjustable Picture Light 7" (17.8cm). Simply attach lamp bracket to back of frame with two screws (enclosed). Push white plastic bulb cover all the way to the end, to ensure that it does not touch the bulb..
  • Complete with ON/OFF cord switch. Lightbulb included..
  • Use 15watt type T-6 bulb. The supplied bulb is warm white color temperature, 2000-3000 Kelvin, incandescent lighting..
  • CAUTION: To prevent electric shock do not use this (polarized)plug with an extension cord, receptible or other unless the blades can be fully inserted to prevent blade exposure..
Check Stock

Chevy Small Block Alternator Bracket for Electric Water Pump SBC 283 302 305 327 350 & 400

  • Billet Aluminum Small Block Chevy Alternator Bracket CNC Machined in the USA backed by our industry leading lifetime warranty!.
  • Works With Most Electric Water Pumps, Mounting Hardware Included..
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
  • Alternator and Electric Water pump NOT Included..
  • Fits SBC 283, 302, 305, 327, 350 and 400 Engines - Will not work with Fuelie Heads.
Check Stock