ReviewsInterchangeable End Mill

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

RSVP International Hand Wash Food Mill Collection, 8-Inch Diameter, Stainless Steel

Made of nonreactive and hygienic 18/8 stainless steel.
Measures 8-inches in diameter by 4-inches high with 7-1/2-inch handle.
What can you make with the food mill? Applesauce, tomato sauce, mashed potatoes, strained carrots, peach puree or raspberry coulis.
Comes with 3 interchangeable stainless steel disks in fine, medium and coarse.
Hand washing recommended the mill to prolong the life of the wooden handle, disks are dishwasher safe.

Check Stock

TAGVIT 15 PCS Open End Interchangeable Torque Wrench Set, 9mm x 12mm Interchangeable Head Torque Wrench for Bicycle, Air Conditioning Maintenance, etc.(4-22 ft.-lb/5.4-30 Nm)

【± 3% High Precision】The accuracy of the 9mm x 12mm open end interchangeable torque wrench is ±3%, and the adjustable torque range is 4-22ft.-lb/5.4-30Nm. The interchangeable torque wrench adopts dual scale design to meet your different needs. The scale is clear and easy to read, not easy wear..
【Two Ways To Use】The square interface of the open end interchangeable torque wrench measures 9mm x 12mm, and can be used with a 1/4" ratchet head and Interchangeable open end adapters. The two use methods can be freely selected according to your needs..
【Reversible Ratchet Head】The 1/4 inch ratchet head included with the interchangeable torque wrench has a quick release button for quick installation and removal of the socket. By adjusting the paddle on the head of the ratchet head you can switch the direction of clockwise and counterclockwise use, which is convenient and quick..
【Easy To Use】The interchangeable head torque wrench has a safety lock ring. After pulling down the lock ring, turn it to set the required torque. After the setting is completed, release the lock ring, and the lock ring will automatically rebound to lock the torque value. When the set torque value is reached, the torque wrench will send click and vibration to remind to s....

Check Stock

Ergonomic Food Mill Stainless Steel With 3 Grinding Milling Discs, Milling Handle & Stainless Steel Bowl - Rotary Food Mill for Tomato Sauce, Applesauce, Puree, Mashed Potatoes, Jams, Baby Food

...s: On the side of our food mills for canning, there are strategically positioned hooks or “ears” as we call them.
These hooks are double welded onto the bowl and allow you to rest the steel mill on top of nearly any pot or bowl.
Includes 3 Grinding Milling Discs: Every applesauce maker mill comes with (3) 5 inch interchangeable mill discs: Fine, Medium, and Coarse.
Use these grinding disks to make tomato sauce, mashed potatoes, jellies/jams, applesauce, soups, baby food, sauces, and more.
Won't Clog Your Pantry Or Cabinets: Measuring a very manageable 8 x 3.5 inches with a 7.5 inch handle, this steel food mill won’t take up a lot of storage space.
You can tuck away all of the pieces neatly in your pantry, cabinet, or kitchen drawers with room to spare.

Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

FESKA Food Mill Stainless Steel with 3 Grinding Discs, Milling Handle & Stainless Steel Bowl - Food Mill for Tomato Sauce incl. Silicone Scraper

PURE & SMOOTH - Our tomato juicer for canning separates skins & seeds from fruits & vegetables - grind & mash soft foods to make smooth sauces, healthy homemade food, tasty soups & thick purées..
SET OF 3 DISCS - Our tomato press comes with 3 interchangeable discs that allow you to make foods of varying consistencies. Use the food press for baby food, creamy sauces, mashed potatoes & more..
ERGONOMIC HANDLE - Thanks to the ergonomic rotary handle the vegetable mill is super easy to operate. The non-slip design of the handle provides a safe grip when using our tomato mill for sauce..
SCRAPER - Our stainless food mill features a silicone scraper that can be used to press purée into a bowl below. The scraper comes in handy when using the machine as a food mill for mashed potatoes!.
EASY TO CLEAN - All parts of our food mills for canning are detachable for easy cleaning after use. The top-grade, rust-proof stainless steel parts of the foodmill can be cleaned in the dishwasher..

Check Stock

uxcell a11103100ux0074 5/16\ x 5/16\ Straight Shank 4 Flute Endmill Milling Cutter

Package Content : 1 x Straight Shank End Mill.

Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

Check Stock

uxcell Milling Cutter 4mm Depth 25mm Cutting Dia 8 Flutes HSS T Slot End Mill

Package Content : 1 x T Slot End Mill1 x Case.

Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..

Check Stock

HQMaster Tapered Ball Nose End Mill 1/8 inch Shank Tungsten Carbide Cutter 3D Woodworking Tool CNC Router Bits D=1.0mm

SIZE: Ball Radius: 0.5mm (Cutting Diameter: 1.0mm), 1/8” shank, Flute Length: 15mm, Overall Length: 1-1/2".
TIALCN coating is a nano coating, which means it’s extremely hard, and can be used at high temperatures and still yield low friction. Package include: 5 pcs Tapered Ball Nose Carving End Mill.
Package include: 5 pcs Tapered Ball Nose Carving End Mill.
Fit for CNC, Engraving machine. Ideal for Plywood, hardwood, acrylic, 3D carving.

Check Stock