ReviewsInterface Module Card

IC/ID Card Machine, Smart Keyboard FRID Access Control Reader(ID)

  • Fast card reading: convenient and fast time-saving card reading time is less than 1s, card reading distance is less than 0.5s, card reading time is less than 0.2s. Card reading distance: 0~80mm.
  • Sensitive reading: The internal radio frequency module and its in-line expansion controller are used to read the card sensitively..
  • Non-slip design: The back of the card reader is a non-slip design with four corners. It is not easy to slide down and can be fixed more stable..
  • Button material: See the use of high-quality crystal materials, special craftsmanship, wear-resistant, easy to clean, comfortable to touch, increase keyboard life..
  • Supporting:With PS/2 keyboard interface, USB interface for keyboard emulation, RS-232 serial output, RS-485 serial output. 2.4GHz/Bluetooth wireless transmission..
Check Stock

Treedix 2pcs Level Shifting MicroSD Breakout Board with SPI Interface Onboard Level Conversion for Arduino UNO R3

  • The module has built-in level adjustment circuit, which can realize level conversion between 5V and 3.3V microSD.
  • Hardware connection: This microsd card is equipped with a level converter, which can not only connect 5v devices other than arduino, but also prevent the SD card from being damaged.
Check Stock

XpressKit XKLOADER2 2nd Gen Computer Programming tool

  • Xpress Kit USB Computer Interface between PC and Programmable Vehicle Interface Module (DEI Install Bypass Essentials.
  • 2nd Generation XPRESSKIT Computer Programming Tool.
  • USB Computer interface acts as a bridge between your PC and an upgradeable vehicle interface module.
  • XKLOADER2 is the 2nd generation USB computer interface (Bootloader) that acts as a bridge between your PC & an XPRESSKIT upgradeable vehicle interface module..
  • More powerfulencryption scheme, faster download speed and higher current outputDirect Plug and playcompatible with the newCANMAX400 and CANMAX400DEI SeriesPlug &XKLOADER2 is the 2nd generation USB computer interface (Bootloader) that acts as a bridge between your PC & an XPRESSKIT upgradeable vehicle interface module..
  • More powerful encryption scheme, faster download speed and higher current outputDirect Plug and play compatible with the new CANMAX400 and CANMAX400DEI SeriesPlug &.
Check Stock

Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module

  • FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
  • FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
  • ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
  • APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
  • MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

5PCS 0.96 Inch OLED Display Module, PEMENOL 28 x 64 Pixel I2C IIC Serial 1 OLED LCD Display Module with SSD1306 Driver for Arduino Raspberry Pi and ESP8266（White Light）

  • This is a new 2.8 inch serial SPI color display module with touch function.
  • Designed with one socket for memory card.
  • With PCB plate (including power supply IC, Memory Card), compatible with 5110 interface.
  • 5V compatible, use with 3.3V or 5V logic.
Check Stock

Xiwai NGFF M.2 Key-A to Mini PCI-E PCI Express Converter Adapter for 9260 8265 7260 AC WiFi Bluetooth Wireless Card

  • NGFF M.2 Key-A to Mini PCI-E PCI Express Converter Adapter for 9260 8265 7260 AC Wifi Bluetooth Wireless Card.
  • Support hot plug,plug &play.No need extra power adapter and any drivers..
  • System Requirement:Windows 10 Windows 7, Windows 8.
  • Kindly Note: Only support KEY A or KEY A+E to PCI-E(The single Key E interface can’t be used),Not fit SSD ,3G/4G module card.
  • Can support Almost NGFF M.2 Wireless Card,such as 8260NGW,8265NGW,7260NGW,7265NGW BCM94352Z.
Check Stock

PUSOKEI Desktop Computer Motherboard, DDR4 Motherboard, 2133/2400/2800MHz, 4-Channel Audio, CPU Motherboard, Support PCIE/SATA Mode

  • The rear 4 USB3.0 ports and Gigabit Ethernet dual indicator design make the motherboard run more stable and faster..
  • The motherboard uses a modular and large heat dissipation power supply design to maintain low temperature and high efficiency..
  • The wireless net card module interface can be directly installed with the same wireless ne card module of the laptop..
  • Provide M.2 high‑speed hard drive, support PCIE and SATA mode, small size and large broadband..
  • Equipped with digital status display and buzzer, the operating status of the motherboard is clear at a glance, and the sound reminder is clearer..
Check Stock

Legrand, Home Office & Theater, Network Switch, Platinum Grey, 12 Port, AC1014

  • NETWORK INTERFACE MODULE: 12 port Cat 5e network interface module has high density mini patch panel..
  • SWITCH BETWEEN DATA AND VOICE APPLICATIONS: Easily switch an outlet from Voice to Data or from Data to Voice with this Cat 5e Network Interface Module..
  • CAT5e SPECIFICATION: It meets Cat5e specifications and RJ45 ports are labeled 1 thru 12..
  • AVAILABLE SIZE: The network module has two different size – 6 port, 12 port..
  • AVAILABLE STYLE: It has two different specification – Cat 5e, Cat 6.
Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

1.44Inch TFT Display Module LCD Display Screen 128RGB x 128 Resolution Serial Peripheral Interface

  • The display module is connected with other board via a serial peripheral interface. It is designed with one socket for sd card which makes it very convenient..
  • The display model is a-TFT with a display size of 1.4in with the high quality driving IC chip ST7735S, the module works more stable..
  • The lcd display screen is graphical 128RGBx128 dot . The LCD effective area is 25.5x26.5mm and the size of each pixel is 0.20x0.20..
  • The lcd display screen is ideal for clear presentation of texts, graphics and images, with a large 1.8 inch sized screen and integrated SD card reader..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock