ReviewsIntermediate Metal Conduit

10-Inch Digital Torpedo Level and Protractor | Neodymium Magnets | Bright LED Display | V-GROOVE MAGNETIC BASE | IP54 Dust/Water Resistant smart level with Carrying Bag

  • HIGH-ACCURACY -- Accurate to the ±0.1° at 0° and 90° and ±0.2° from 1-89°..
  • displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. Great for roofs, rails, ADA ramps.
  • JOBSITE TOUGH -- Sturdy solid I-beam aluminum frame, Neodymium magnets, rubber end caps and IP54 dust/water splash resistant protection for harsh working environments.
  • DUAL FUNCTIONALITY With STRONG NEODYMIUM MAGNETS -- As a true (absolute) digital level and electronic inclinometer / protractor lets you set or check relative angles between surfaces. Plus, magnetic base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication and more.
  • LARGE, BRIGHT GREEN LED DISPLAY With AUDIO INDICATOR -- This level features a large, bright LED display that flips, so you can easily read your measurements all day and night – even in the darkest spaces. What's more, we craft our digital level with audio indicator functionality, so you can achieve level and 90 degrees even with your eyes closed.
  • V-GROOVE MAGNETIC BASE -- Magnetic v-groove base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication.
Check Stock

Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

  • Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall).
  • Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction..
  • Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts.
Check Stock

IDEAL Electrical 74-047 Aluminum Bender – Aluminum, Conduit Pipe Bender w/handle for 3/4 in. EMT Pipes. Cutters and Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the aluminum conduit bender offers application in plumbing repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with aluminum, the rugged construction of the lightweight iron bender head offers durability to withstand long-term heavy-duty use and convenient handling. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the aluminum pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Aluminum EMT bender is suitable to bend 3/4 in. EMT metal pipes as well as 1/2 in. Rigid & 1/2 in. IMC pip....
Check Stock

IDEAL Electrical 74-034 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1.25 in. EMT Pipes. Cutters and Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1-1/4 in. EMT metal pipes as well as 1 in. Rigid & 1 in. IMC pipes. It uses industrial standard Benfield b....
Check Stock

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,，UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,，UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

Klein Tools 80036 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Programmable Angles, Magnetic Base, 2-Piece

  • DIGITAL LEVEL MEASURES 0-90 Degree, 0-180 Degree, or dual axis bullseye ranges.
  • PRE-PROGRAMMED TARGET PITCHES: 1/8-Inch, 1/4-Inch, 3/8-Inch and 1/2-Inch per foot.
  • AUDIBLE ALARM sounds when target angle is achieved.
  • BULLSEYE ORIENTATION accurately determines X- and Y-axis.
  • DISPLAY AUTO-ROTATES when used in horizontal or vertical orientation.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

Zircon MetalliScanner MT6 Professional Metal Detector

  • Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
  • Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
  • Shows the depth of metal from the surface in both inches and centimeters.
  • Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
  • Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.
Check Stock

Milwaukee 48-00-5182 Super Sawzall Blade 14 Teeth per Inch 6-Inch Length (5pack)

  • For crimping round metal pipe to create a male fitting end.
  • Optimal handle span for maximum power and comfortable operating range.
  • 14 TPI, 6 in. Length, Bi-Metal Construction.
  • 1/2 in. Universal Tang fits all Sawzalls.
  • For cutting metal 3/16 in. thru 1/4 in., conduit, tubing, channels, pipe, rubber, and fiber..
Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

  • SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
  • DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
  • IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Modway Conduit 7 Piece Rattan Patio Dining Set in Brown and Mocha

  • Refresh your alfresco space with the Conduit 7 Piece Outdoor Patio Dining Set. Bringing transitional style with contemporary modern flair to any outdoor area, Conduit Armchairs feature a powder-coated aluminum frame wrapped in synthetic UV-resistant wicker rattan. Foam padded cushion and waterproof cover offer a comfortable seat while dining or entertaining. The Conduit 70" Dining Table features a tempered glass tabletop provides a smooth, easy-to-clean surface ideal for dining and entertaining.
  • Set Includes: One - Conduit 70" Outdoor Dining Table, Six - Conduit Outdoor Dining Armchair.
  • Overall Product Dimensions: 120"L x 88.5"W x 34.5"HTable Dimensions: 70"L x 38.5"W x 30"HChair Dimensions: 25"L x 24.5"W x 34.5"H.
  • Material: Square aluminium tube:40*40*1.5mm.
Check Stock