StorageTekPro LSI 9340-8i flashed to IT Mode = 9300-8i w/LSI P16 IT-Mode F/W for ZFS FreeNAS unRAID
The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
LSI 9240-8i 6Gbps SAS Raid Card, HBA FW:P20 9211-8i IT Mode for ZFS FreeNAS unRAID 2 SFF SATA RAID Controllers
The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
StarTech.com 4 Bay 3.5 SATA SAS Backplane - 3 x 5.25in Bays - Trayless Mobile Rack - SATA Backplane - Removable Hard Drive Bay - HDD Rack HSB43SATSASB
Hot swap up to four 3.5" SATA or SAS hard drives using three 5.25" bays.
4 Bay 3.5" SATA SAS Backplane with trayless design.
Hot Swap Mobile Rack for three 5.25" bays, supports SAS I/II and SATA I/II/III (up to 6Gbps).
4 bay mobile rack with durable plastic and aluminum construction provides a cost-effective solution for drive maintenance and hot swapping drives....
2 fans and venting to optimize heat dissipation / HDD Rack/ SAS Backplane/ SATA Backplane / hard drive tray / 4-bay SAS/SATA backplane / Hard drive....
StarTech.com 4-Bay Mobile Rack Backplane - Trayless Hot Swap Mobile Rack Backplane for 3.5in SAS II/SATA III - 6 Gbps HDD HSB4SATSASBA
INCREASED PRODUCTIVITY: The mobile rack backplane for 3.5in SAS II/SATA III turns three 5.25" bays into a hot-swappable interface for up to four....
MAXIMUM COMPATIBILITY: The hot swap backplane for 3.5in SAS II/SATA III can interface with SATA I/II/III and SAS I/II hard drives -- an ideal solution....
EASY TO USE: For a quick and secure method of installing and removing drives, the trayless hot swap mobile rack backplane features ejection levers and....
MAINTAIN OPTIMAL TEMPERATURE: To help prevent drive failure, the aluminum mobile rack backplane provides drive cooling with a built-in fan and....
Connect and hot swap four 3.5in SATA III or SAS II hard drives to your computer system in three 5.25” bays, with support for SATA 6 Gbps.
CABLEDECONN Internal Mini SAS 36-Pin 8087 to SFF-8087 Cable 0.5m
Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Intended primarily for data storage centers the SAS interface is backwards compatible with SATA.
This allows the user to mix more expensive lower-capacity SAS drives for applications that require faster data access and higher reliability with lower-cost higher-capacity SATA drives for applications with lower access speed requirements.
CableDeconn 0.7M Internal Mini SAS 36-Pin to SFF-8087 Cable - Black
Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Intended primarily for data storage centers the SAS interface is backwards compatible with SATA.
This allows the user to mix more expensive lower-capacity SAS drives for applications that require faster data access and higher reliability with lower-cost higher-capacity SATA drives for applications with lower access speed requirements.
CableCreation Internal HD Mini SAS (SFF-8643 Host) - 4X SATA (Target) Cable,SFF-8643 to 4X SATA Cable, SFF-8643 for Controller, 4 Sata Connect to Hard Drive, 1M / 3.3FT
[ SFF-8643 Cord ] The SFF-8643 is the latest HD Mini SAS connector design for implementing HD SAS Internal interconnect solutions..
[ High Data transfer] 36 pin High Density (HD) Mini SAS SFF-8643 Internal cable assemblies are available for SAS 2.1, 6Gb/s and SAS 3.0, 12Gb/s specification. Hybrid versions of these new cables will allow for a smooth transition from 6Gbps to 12Gbps.
SFF-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.
[ SFF-8643 Port ] SFF-8643 interface is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. It support up to 4-ports (4 lanes) of SAS data and is compliant with the latest SAS 3.0 spec.
[ What You Get] 1 x CableCreation 3 FT Mini SAS SFF-8643 Cable. CableCreation provide 24 Months Warranty and lifetime Technical Service.
The HP smart Array P840 controller delivers 12 GB/s SAS connectivity for HP ProLiant Gen9 servers when connected to 12 GB/s internal storage devices for Increased performance in messaging.
The HP smart Array P840 controller offers optional HP secure encryption capability that protects data at rest on any bulk storage Attached to the controller.
The HP smart Array P840 controller allows eight plus eight small Form Factor (SFF) drives to be Attached.
ANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)
【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.