ReviewsInternation Torque

Neiko 20743A 3/4”-Inch Digital Torque Adapter, 150-750 ft-lb, Digital Torque Wrench Converter/Torque Wrench Adapter, Alerts Torque Setting, Calibrate Digital and Analog Torque Wrenches

  • TORQUE WRENCH CONVERSION: This digital torque adapter converts any ratchet wrench into a precision torque wrench with a digital gauge and serves as an accurate calibration device for existing digital and analog torque wrenches..
  • METRIC/SAE & BI-DIRECTIONAL: This digital adapter can calculate torque at both metric and SAE units (Ft.-Lb., N-m and kg-m) and bolsters a 3/4-inch drive with socket drive and can measure in both directions, clockwise and counter-clockwise..
  • PEAK AND TRACE MODE: This torque adapter unit provides two types of modes: a peak mode that indicates when a specific level of torque is reached and a trace mode that actively shows how much torque is being applied on the display..
  • NOISE ALERT AT TORQUE SETTING: The audible confirmation is accompanied by a 3 LED light indicator system to give you a progressive audio notification when reaching specified torque ratings/settings and auto shuts off after 80 seconds of idle time..
  • ADAPTER SPECIFICATIONS: Torque range: 150-750 Ft-Lb or 200-1000 N-m.
Check Stock

TEKTON 1/2 Inch Drive Split Beam Torque Wrench (40-250 ft.-lb.) | TRQ62203

  • Includes 1-pc. 1/2 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 40-250 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

TEKTON 3/8 Inch Drive Split Beam Torque Wrench (20-100 ft.-lb.) | TRQ62103

  • Includes 1-pc. 3/8 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 20-100 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

ARES 43011-1/4-Inch Drive Micrometer Torque Wrench - Dual Torque Scales - 40-200 in/lbs (4.52-22.6Nm) - Click Torque Wrench - Ultra Smooth Torque Dialing with High Visibility Laser Etched Markings

  • ITEM SPECIFICATIONS: The ARES 1/4-Inch Drive Micrometer Torque Wrench features dual torque scales with in/lbs and newton meters readings and ranges of 40-200 in/lbs and 4.52-22.6 Nm with an accuracy tolerance of ±3%. The ultra smooth handle rotation with high visibility laser etched markings makes it easy to adjust your specified torque. Designed with longevity in mind, all of our torque wrenches are calibrated before shipping and meet ANSI standards..
  • DESIGN CONSIDERATIONS: This click type torque wrench is designed with ultra smooth torque dialing, and the quick torque change mechanism features a spring loaded pull down knurled collar that secures the torque setting with a positive lock mechanism. The quick release mechanism helps you dial in your torque setting effortlessly and instantly. The click type design alerts you when torque is reach and helps to prevent over-torquing..
  • CONVENIENT STORAGE: This click type micrometer torque wrench comes with a high quality storage case, so you'll always have the perfect place to keep it while it's not in use, and you'll never have to search for it when you need it. This torque wrench features a black nickel finish on the shaft and ratchet, and a red anodized finish on the aluminum machine knurled handle. The ....
Check Stock

NEIKO 20742A 3/8” Digital Torque Adapter, 14.7-99.6 Ft-Lb, 3/8” Drive Digital Torque Wrench Converter/Torque Wrench Adapter, Alert Signals Torque Setting, Calibrate Digital & Analog Torque Wrench

  • TORQUE WRENCH CONVERSION: This digital torque adapter converts any ratchet wrench into a precision torque wrench with a digital gauge and serves as an accurate calibration device for existing digital and analog torque wrenches..
  • METRIC/SAE & BI-DIRECTIONAL: This digital adapter can calculate torque at both metric and SAE units (Ft.-Lb., N-m and kg-m) and bolsters a 3/8-inch drive with socket drive and can measure in both directions, clockwise and counter-clockwise..
  • PEAK AND TRACE MODE: This torque adapter unit provides two types of modes: a peak mode that indicates when a specific level of torque is reached and a trace mode that actively shows how much torque is being applied on the display..
  • NOISE ALERT AT TORQUE SETTING: The audible confirmation is accompanied by a 3 LED light indicator system to give you a progressive audio notification when reaching specified torque ratings/settings and auto shuts off after 80 seconds of idle time..
  • ADAPTER SPECIFICATIONS: Torque range: 14.7-99.6 Ft-Lb or 27-135 N-m.
Check Stock

TAGVIT 1/2 Inch Drive Digital Torque Wrench, 7.38-147.5 ft-lbs./10-200Nm Angle Digital Torque Wrench, Electronic Torque Wrench with Buzzer and LED Flash Notification, ±2% Accuracy

  • Four Torque Measurement Units: This digital torque wrench can measure from 7.38-147.5 ft-lbs./10-200Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your dif....
Check Stock

TAGVIT 15 PCS Open End Interchangeable Torque Wrench Set, 9mm x 12mm Interchangeable Head Torque Wrench for Bicycle, Air Conditioning Maintenance, etc.(4-22 ft.-lb/5.4-30 Nm)

  • 【± 3% High Precision】The accuracy of the 9mm x 12mm open end interchangeable torque wrench is ±3%, and the adjustable torque range is 4-22ft.-lb/5.4-30Nm. The interchangeable torque wrench adopts dual scale design to meet your different needs. The scale is clear and easy to read, not easy wear..
  • 【Two Ways To Use】The square interface of the open end interchangeable torque wrench measures 9mm x 12mm, and can be used with a 1/4" ratchet head and Interchangeable open end adapters. The two use methods can be freely selected according to your needs..
  • 【Reversible Ratchet Head】The 1/4 inch ratchet head included with the interchangeable torque wrench has a quick release button for quick installation and removal of the socket. By adjusting the paddle on the head of the ratchet head you can switch the direction of clockwise and counterclockwise use, which is convenient and quick..
  • 【Easy To Use】The interchangeable head torque wrench has a safety lock ring. After pulling down the lock ring, turn it to set the required torque. After the setting is completed, release the lock ring, and the lock ring will automatically rebound to lock the torque value. When the set torque value is reached, the torque wrench will send click and vibration to remind to s....
Check Stock

TAGVIT Digital Torque Wrench (12.54-250.8 ft-lbs./17-340Nm), 1/2 Inch Drive Electronic Torque Wrench with Angle, ±2% CW Torque Accuracy with Buzzer and LED Flash Notification for Bike Motorcycle Car

  • Four Torque Measurement Units: This digital torque wrench can measure from 12.54-250.8 ft-lbs./17-340Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your different needs and usage habits..
  • Two Way Use: By adjusting the direction button on the head of the electronic....
Check Stock

CPS BLACKMAX BTLDTW Adjustable Electronic Torque Wrench

  • WHY BLACKMAX: Ideal for HVAC mini-split installations or where OEM-specified torque settings are critical, the BlackMax digital torque wrench exceeds the capabilities of mechanical-only torque wrenches by offering a variety of user-friendly features in a lightweight, durable and ergonomic housing.
  • PRESETS: The BTLDTW stores 5 factory and 5 user-defined presets, and is able to simultaneously display stored vs. actual torque values.
  • READABILITY: Large display numbers prevent misreading torque data, a common problem when using wrenches without digital displays.
  • CUSTOMIZABLE: View “Peak” and “Track” torque data with audible (tone), visual (LED) and tactile (vibration) “torque alerts” to prevent over-tightening by providing advance warning when approaching or exceeding predefined torque settings.
  • ABOUT US: CPS Products is a business built by technicians, for technicians. We design Tools for the Professional Service Technician. With the world’s most comprehensive range of Leak Detection technologies, Smart Diagnostic tools, and proven Maintenance Solutions, CPS Products has been The Workingman’s Choice since 1989.
Check Stock

CDI Torque Products A Snap-On Company 1/2' Drive 30-250 Ft Lbs / 47-332 NM Dual Scale Micrometer Adjustable Metal Handle Torque Wrench Individually Serialized with Matching Certificate of Calibration

  • ✔️Williams CDI Torque Products A Snap-On Company Products are Proudly made in the United States of America, City of Industry, California. Each tool comes with a Certificate of Calibration and custom molded storage case..
  • ✔️CDI Torque Products A Snap-On Company - The CDI Torque Wrench A Snap-On Company is a micrometer adjustable 1/2" torque wrench with a maximum torque of 250 ft lbs. This dual-scale micrometer adjustable torque wrench from CDI Torque Products A Snap-On Company has a 1/2" Drive and an English range of 30-250 Ft Lbs and Metric range of 47-332 Nm..
  • ✔️CDI Torque Products A Snap-On Company Handles are lightly knurled for a tough, non-slip grip. Dual scale, calibrated dual direction, Positive lock with spring loaded pull down lock ring. Accuracy: ± 3% clockwise ± 4% CCW of indicated value, CW, from 20% to 100% of full scale..
  • ✔️CDI Torque Products A Snap-On Company Fast, accurate and easy to set, Easy-to-read laser marked scales, Most feature quick release buttons which provide good socket retention as well as easy socket removal. Meets or exceeds ASME B107.14-2004, ISO 6789 standards, Individually serialized with matching certificate of calibration traceable to N.I.S.T..
  • ✔️CDI Torque Products A Snap-On Company The metal h....
Check Stock

VANPO Adjustable Digital Torque Wrench (5-99.6 Ft-lb/6.8-135 N.m), 34mm Adjustable Jaw Open End Torque Wrench Accuracy CW ±2% CCW±3%, LCD Display Buzzer & LED Indicator for HVAC Torquing Down Nut

  • 【Quickly Set the Torque Value of Open End Torque Wrench】 Press and hold the ▲ or ▼ key until you hear a “beep”, then press the ▲ or ▼ key to set the torque value. The flashing number indicates the value you are currently setting. After the setting is completed, short press the U/S key to move the number, and short press the C key to save the setting. Operation is quick and easy..
  • 【Two Measurement Modes】The digital torque wrench has two modes: peak/track. The peak mode force release shows the maximum torque value, the data is automatically saved in the background program, and a total of 50 sets of data can be saved. Track mode can display real-time torque values. You can configure the measurement mode as required. Buzzer and LED notification when target torque is reached..
  • 【Torque Range 5-99.6 Ft-lb/6.8-135 N.m】 The torque value range of digital open end torque wrench is ( 5-99.6 Ft-lb/6.8-135 N.m). In kgf.cm / Nm /lbf.ft /lbf.in, the clockwise direction accuracy is ±2%, and the counterclockwise direction accuracy is ±3%. Reliable and accurate measurement data increases your productivity..
  • 【LCD Display】The adjustable torque wrench adopts double-layer screen protection to be more resistant to falling, and the large color LCD ....
Check Stock