ReviewsIntex Excursion Accessories

Intex Filter Cartridge Size A

FILTER: Intex Typa A or C filter cartridges feature a thicker, heavier Dacron paper fiber for more efficient filtration and to keep your pool clean....
PRODUCT INFO: Dacron filament media with 63 pleats and is easy to clean and is (L x W x H): 4.3 x 4.3 x 8 inches. Fits Intex filter and pump unit....
FILTER CHANGE: Intex recommends replacing this filter cartridge as often as every 2 weeks for peak pump performance and to keep your water clean and....
INTEX FILTER: Replaces Intex 29000E filter cartridge and fits any filter pump that uses Intex 59900 filter cartridges, and extend the life of this....
COMPATIBLE WITH: Krystal Clear Model's: 02, 12, 12R, 108, 108R, 603, 635 and 637 and for pumps with gallons per hour (GPH) of 500, 530, 800, 1000 and....

Check Stock

Intex Air Mattress Plug, Intex Inflatable Valve Cap, Intex air Mattress Valve Cover, Inflatable Air Valve Caps Screw Plugs Replacement, 3 in 1 Airbed Valve Secure Seal Cap Screw

STURDY AND DURABLE: 3 in 1 air mattress cap replacement is made of high quality plastic material, secure, sturdy, anti- and durable..
ONE WAY INFLATION VALVE: This intex air mattress valve cover is a one-way inflation valve, good for quick inflation..
EASY TO INSTALL AND REPLACE: This intex air mattress cap replacement will fit into a hole that is about 4.28 cm diameter, and has a plug cap. Very easy to install and replace, you will find its convenience..
USE RANGE: The Intex air mattress valve cover is designed for certain branded inflatable airbeds, such as for Intex airbeds. Suitable for airbed mattress with 45mm holes..
ANTI- LEAK: This intex inflatable valve cap features high secure air protection. The valve cap design ensures anti-leak when air inflation..
USE RANGE: The Intex air mattress valve cover....

Check Stock

Ximoon Hose Connectors Water Drain Plug Connector ONLY for Intex Round Swimming Pools Replace Part Number 10184

【PART NUMBER】：Number 10184 for these garden hose connectors - (only) intex round swimming pool & spa replacement parts. Fits all 10' to 24'.....
【PACKAGE INCLUDES】: One pack intex pool drain to hose adapter garden hose round swimming pool. Notes: this pool drain plug will not fit all....
【HIGH QUALITY】：Ximoon garden hose connectors & accessories were made of high-quality plastic, strong and durable, they are not easy to break. In....
【EASY TO INSTALL】：This connector hose is very easy to install, you can directly drained water wherever desired when you plunger pushes flap open....
【SINCERE SERVICE】：Please make sure the water hose connector‘s part number of new replacement fit your equipment. We apologise for the....

Check Stock

Txdiyifu Garden Hose Drain Plug -for Intex Connector

Fits all Intex Wet Set pools as well as all Sand N Sun pools manufactured by Intex..
Package Contains : Lawn Garden Hose Drain Plug Adapter ｜For (ONLY) INTEX Round Swimming Pool & Spa Replacement Parts.
Product Highlights: Replace Part NO.10184 For INTEX Round Metal Frame and Easy Set Pools Fits all 10' to 24'. Round Metal Frame Pools, and 6' to 18'....
Replace for Intex model part number 10184 . (How this part is connected to the pool drain : plunger pushes flap open on inside of pool wall, and....
Perfect Design: Ideal for draining the water in your pool Above Ground Round Metal Pool Drain Plug Connector (Adapter). How this part is connected to....

Check Stock

R172223 Housing O-Ring for Pentair Pool/Spa Filter and Leaf Traps 6-1/4' （2/Pack）

QUALITY MATERIAL - Our 25076RP intex pool washer and O-ring kit are made of durable quality silicone material, built to last in all types of pools and spas using all types of treatments. Produced to exact standards to match the 1-1/2in Fittings. Making our replacement rubber washer & ring pack for pool equipment last longer than others and working like original one. Keep your pools running in no time..
PERFECTLY COMPATIBLE - This 25076RP large strainer rubber washer gasket set and ring pack is perfect for replacing Intex 18" and larger pool strainers. Fits for Intex pool parts 10747, 25006, 25010, 28633, 28635 and 28621, ect. Replace your 18' and larger pool strainers, requires 1.5 "ID hose..
DESIGN & INSTALLATION - Our replacement rubber washer & ring pack is for Intex large pool strainers, designed for use in Intex 10747 plunger valves and strainer connectors to increase the contact area of the hose or pool equipment with the surface of the piston valve to prevent the surface of the Intex pool piston valve from being wearing out. Loosen leaks in piston valve hoses and filter connections..
REPLACE ADVISE - These washer and ring kit in connectors become flattened and broken over time, must be replaced. It is a very common issue..

Check Stock

Intex Spa Maintenance Kit, Cup holder & Tray & Inflatable Spa Headrest (2 Pack)

Intex PureSpa Hot Tub Maintenance Accessory Kit with Brush, Skimmer, & Scrubber, Intex PureSpa Attachable Cup Holder And Refreshment Tray Accessory and Intex PureSpa Inflatable Headrest Accessory (2-pack).
Includes curved brush for inner sidewall care.
Durable mesh skimmer net helps fish out leaves and other debris.

Check Stock

UASAM Garden Hose Water Drain Plug Connector for Intex Round Swimming Pool Hose Connectors Parts 10184

1.Package Contains : Lawn Garden Hose Drain Plug Adapter ｜For (ONLY) INTEX Round Swimming Pool & Spa Replacement Parts.
2.Product Highlights: Replace Part NO.10184 For INTEX Round Metal Frame and Easy Set Pools Fits all 10' to 24'. Round Metal Frame Pools, and 6' to 18'....
3.Replace for Intex model part number 10184 . (How this part is connected to the pool drain : plunger pushes flap open on inside of pool wall, and....
4.Perfect Design: Ideal for draining the water in your pool Above Ground Round Metal Pool Drain Plug Connector (Adapter). How this part is connected....
Fits all Intex Wet Set pools as well as all Sand N Sun pools manufactured by Intex..

Check Stock

POOLHACKER Replacement Type B Hose Adapter 1.25' to 1.5' with Plunger Valve Parts for Intex, Hose Adapter B & Shut Off Valve with Gaskets & Nuts for Above Ground Pool(2 Pack)

【Assembly Kit】 Includes 2 plunger valves, 2 adapter B, 4 hose o-rings, and 2 step washers..
【Awesome Design】One-step solution to on-the-stop, instant filter pump or filter cartridge changes. It can efficiently and conveniently stop the flow of your pool. And also the plunger valve makes it easy to stop and start the water when doing the back flush process on the sand pump. Replace your old plunger valve(s) or upgrade to the Intex Plunger Valve system,makes changing hoses and pumps a breeze!.
【Easy Installation】 ①Adapter B requires an Intex Pool with 1.25” hose fittings to work properly. ②Adapter B is connected to the on-off valve and installed on the pool wall..
【Compatible】Works with the Intex 1500, 2500 and 4000 gallon per hour filtration pumps as well as the Intex Saltwater Chlorinator and Intex 2000 gallon per hour Chlorinator Pump Combo. Compatible with Intex, Bestway and Coleman above ground pools with the same size of outlet/inlet connection..
【Safe & Efficient】The swimming pool parts are made of high quality plastic materials, which is sturdy and durable. Including 2 * Large Pool Plunger Valve Assembly for Intex / Bestway..

Check Stock

Intex Large Strainer Rubber Washer and Ring Pack Replacement Parts (2 Pack)

**Intex Large Strainer Rubber Washer and Ring Pack**.
Includes: (2) Intex Replacement Rubber Washer & Ring Pack for Large Pool Strainers.
Replace your Intex 18′ and larger Pool Strainers, requires 1.5″ inside diameter hoses to use.
Each unit includes: (2) 1 1/2″ O Rings (10262), (2) 2 1/4″ Step Washers (10745), (2) 3 7/8″ Flat Gaskets (10255).
Used with Intex Models 28633, 28635 and 28621..

Check Stock

Intex Replacement Hose Adapter A (2 Pack) + Replacement Hose Adapter B (2 Pack)

Intex Replacement Hose Adapter A with Collar (Pair).
Genuine Intex OEM replacement part that keeps pool safe and working properly.
Converts threaded hoses to clamp style hoses and 1.5 and 1.25-inch hoses for Intex pool sets.
Fits all Intex 4000, 2500, 2000 and 1500 gallon per hour filter pumps that use threaded hose connections.

Check Stock

Intex Replacement Hose Adapter A w/Collar for Threaded Connection Pumps (Pair)

Converts threaded hoses to clamp style hoses and 1.5 and 1.25-inch hoses for Intex pool sets.
Fits all Intex 4000, 2500, 2000 and 1500 gallon per hour filter pumps that use threaded hose connections.
Fits Intex chlorine generators and salt systems that use threaded hose connections.
Genuine Intex OEM replacement part that keeps pool safe and working properly.

Check Stock