ReviewsIo Module

WYPH Ultrasonic Module HC-SR04 Distance Measuring Ranging Sensor for Arduino UNO for Mega R3 Duemilanove Nano Robot Pack of 10pcs

Using IO trigger for at least 10us high level signal.
The module automatically sends eight 40 kHz and detect whether there is a pulse signal back.
If the signal back, through high level ,time of high output IO duration is the time from sending ultrasonic to returning. Test distance = (high level....
Power supply :5V DC, quiescent current : .

Mainly used for qualitative detection, suitable for home and environmental gas detection equipment, ozone gas detection, gas sensor test concentration....
The module has level signal output and alarm signal indicator.
The module is with analog signal output, voltage range: 0-5V.
The level signal output is effective at low level, which can drive PNP transistors and can also be connected to the IO port of the microcontroller.
The analog output voltage increases with the increase of ozone concentration, the higher the concentration, the higher the voltage.

Designed For Raspberry Pi Compute Module 4 IO Board.ONLY COMPATIBLE WITH Raspberry Pi OFFICIAL IO BOARD.
Make It Easy To Build Your Own Raspberry Pi CM4 Mini PC.
Each Cut-Out Is Completely Aligned With The Connector.
Comes With Cooling Fan, Combined With The Airflow Vent, Better Heat Dissipation.
Binocular Vision, PoE Powered Raspberry Pi Projects, Or Other Industrial Context.

✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
User manual, refer to Geekworm WiKi search C235..
✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..

PS2 game joystick axis sensor module consists of using original quality metal PS2 joystick potentiometer system For the (X, Y) a 2-axis analog output and for (Z) 1 digital output channel button..
Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin..
This joystick module can be easily connect to Arduino by normal IO Expansion Shield with supplied cables..

[PACKAGE INCLUDED] 3pcs HC-SR04 distance measurement module & 3pcs mounting bracket for installation.
[FEATURE] These module is for distance measuring transducer that working with ultrasonic, they consist of ultrasonic transmitter, receiver, and....
[FUNCTIONAL PARAMETER] Effectual Angle: .
Resolution : 0.3 cm. Power Supply : 5V DC.
[UNIVERSAL COMPATIBILITY] Built in standard interface that can be controlled directly by microcontroller，such as 8051, AVR.
[WORKING PRINCIPLE] Using IO trigger for at least 10us high level signal, when triggered it sends out a series of 40KHz ultrasonic pulses and receives....

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..

3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
This shield can make quick work for managing stepper motors in your project..

✔I2C interface, I / O expansion module, two I / O scalability 8 I / O (up to 8 simultaneous use the PCF8574 expanded to 64 I / O).
✔Typical application: I / O resource shortage MCU I / O expansion.
✔Main resources: the PCF8574 I2C interface, 8-bit parallel.
✔Package Included: 5 x PCF8574 IO Expansion Board I/O Expander I2C-Bus Evaluation Development Module.
✔We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution..

【Small Batch Burn 】The fixture doesn't contain ESP32 module, which is suitable for burning test board of ESP-WROOM-32 module.
【Test Burn Fixture】The pin has good contact performance, ensure stable working.
【Precise Burn Fixture】All IO port have led can be used as the minimum system board or small batch burn with fixture.
【Precision Process】This burn fixture is adopted of high quality electronic components, and precision process, ensure for the durability.
【Stable 】ESP32 is a safe, reliable, and scalable to a variety of applications,and Ultra-Low power consumption, works perfectly.