ReviewsIot Lighting

ideaspark 3pcs ESP8266 NodeMCU CH340 ESP-12E WiFi Wireless Internet Development Board Serial Module with Micro USB Cable Works Great for Arduino IDE

  • Tensilica Xtensa 32-bit LX106 RISC microprocessor. This microprocessor supports RTOS and operates at 80MHz to 160 MHz adjustable clock frequency. NodeMCU has 128 KB RAM and 4MB of Flash memory to store data and programs. Its high processing power with in-built and Deep Sleep Operating features make it ideal for IoT projects.
  • The NodeMCU Development Board can be easily programmed with Arduino IDE since it is easy to use.Works greate with Arduino/Mongoose IoT/Micropython.
  • CH340 replace CP2012 USB to UART Bridge ,provides a better performance plug and play interface solution and easier programming. Use the search engine Google.com or Bing.com earch for the keyword r "CH340 driver", it is very easy to find the driver installer.
  • Applications:Access points portals,IoT projects,Wireless data logging,Used in learning the networking fundamentals,Sockets and smart bulbs,Smart home automation systems.
Check Stock

Arduino MKR WAN 1310 [ABX00029]

  • The perfect IoT node and building block for adding to Lo-Ra connectivity to low power wide area IoT devices.
  • Very long battery life - the latest low power architecture means the power consumption is able to go as low as 104uA for extended battery life. It is also possible to use the USB port to supply power (5V) to the board, so you can run the board with or without batteries.
  • Local storage - On board 2MByte Flash to facilitate data logging and Over-The-Air (OTA) functions.
  • Enhanced Security - credentials and certificates are stored in the boards crypto chip, an embedded secure element.
  • Powerful - The MKR WAN1310 is based on the Atmel SAMD21 microcontroller and a Murata CMWX1ZZABZ Lo-Ra module.
Check Stock

SparkFun IoT RedBoard - ESP32 Development Board -ESP32 WROOM MCU Module USB-C Connector Qwiic Connector MicroSD Card -ESP32 Dimensions: 2.3in x 2.7in x 1.08in

  • The IoT RedBoard is an ESP32 WROOM-equipped development board that has everything you need in an Uno with extra perks like USB-C, Qwiic, and more..
  • IoT RedBoard Features: CPU and On­Chip Memory. ESP32-D0WD-V3 embedded, Xtensa dual-core 32-bit LX6 microprocessor, up to 240MHz. 448KB ROM. 520KB SRAM. 16KB SRAM in RTC.
  • Also Features: Wi­Fi, 802.11b/g/n. Bit rate: 802.11n up to 150Mbps. A-MPDU and A-MSDU aggregation. 0.4µs guard interval support. Center frequency range of operating channel: 2412 ~ 2484MHz..
  • We've included 3.3V voltage translation and a Qwiic connector to the edge of the board to allow for quick and seamless connection to our ever-growing line of I2C based Qwiic products. The board even includes a microSD socket if your application requires you to log and save data to a memory card..
  • The IoT RedBoard can target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding..
Check Stock

3x Exell 2/3A Size 1.2V 700mAh NiCD Flat Top Rechargeable Batteries for Smoke/Carbon monoxide detectors, iBeacons, IoT/sensing devices, emergency lighting, Gas/Water meters, Security devices

  • USES: Smoke and carbon monoxide detectors, Gas and water meters, Security devices, iBeacons, IoT/sensing devices, emergency lighting, portable devices, power tools.
  • HIGH-QUALITY BATTERY: Made from Nickel Cadmium (NiCD), these rechargeable batteries feature a voltage of 1.2V.They're designed for use in a wide variety of high-tech applications and are built to last..
  • RECHARGEABLE BATTERY: Designed to provide long-lasting power, these tab-terminal batteries can be recharged 500 - 1000 times, giving you years of use. They'll give your high-power devices such as flashlight, radios, solar devices, and more plenty of life..
  • CROSS-REFERENCE: Before ordering this battery backup, be sure to check that the product is compatible with the battery's chemistry, size, amperage, polarity, and voltage..
Check Stock

2x Exell 2/3A Size 1.2V 700mAh NiCD Flat Top Rechargeable Batteries for Security devices, iBeacons, IoT/sensing devices, emergency lighting, Smoke/Carbon monoxide detectors, Gas/Water meters

  • USES: Smoke and carbon monoxide detectors, Gas and water meters, Security devices, iBeacons, IoT/sensing devices, emergency lighting, portable devices, power tools.
  • HIGH-QUALITY BATTERY: Made from Nickel Cadmium (NiCD), these rechargeable batteries feature a voltage of 1.2V.They're designed for use in a wide variety of high-tech applications and are built to last..
  • RECHARGEABLE BATTERY: Designed to provide long-lasting power, these tab-terminal batteries can be recharged 500 - 1000 times, giving you years of use. They'll give your high-power devices such as flashlight, radios, solar devices, and more plenty of life..
  • CROSS-REFERENCE: Before ordering this battery backup, be sure to check that the product is compatible with the battery's chemistry, size, amperage, polarity, and voltage..
Check Stock

Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)

  • Operates on LTE CAT-M1 and/or NB-IoT technology + GPS + temperature sensor.
  • Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages.
  • Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging.
  • Kit includes dual flexible LTE/GPS antenna and stacking female header kit.
  • Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions.
Check Stock

20x Exell 2/3A Size 1.2V 700mAh NiCD Flat Top Rechargeable Batteries for IoT/sensing devices, emergency lighting, Smoke/Carbon monoxide detectors, Gas/Water meters, Security devices, iBeacons

  • USES: Smoke and carbon monoxide detectors, Gas and water meters, Security devices, iBeacons, IoT/sensing devices, emergency lighting, portable devices, power tools.
  • HIGH-QUALITY BATTERY: Made from Nickel Cadmium (NiCD), these rechargeable batteries feature a voltage of 1.2V.They're designed for use in a wide variety of high-tech applications and are built to last..
  • RECHARGEABLE BATTERY: Designed to provide long-lasting power, these tab-terminal batteries can be recharged 500 - 1000 times, giving you years of use. They'll give your high-power devices such as flashlight, radios, solar devices, and more plenty of life..
  • CROSS-REFERENCE: Before ordering this battery backup, be sure to check that the product is compatible with the battery's chemistry, size, amperage, polarity, and voltage..
Check Stock

10x Exell 2/3A Size 1.2V 700mAh NiCD Flat Top Rechargeable Batteries for emergency lighting, Smoke/Carbon monoxide detectors, Gas/Water meters, Security devices, iBeacons, IoT/sensing devices

  • USES: Smoke and carbon monoxide detectors, Gas and water meters, Security devices, iBeacons, IoT/sensing devices, emergency lighting, portable devices, power tools.
  • HIGH-QUALITY BATTERY: Made from Nickel Cadmium (NiCD), these rechargeable batteries feature a voltage of 1.2V.They're designed for use in a wide variety of high-tech applications and are built to last..
  • RECHARGEABLE BATTERY: Designed to provide long-lasting power, these tab-terminal batteries can be recharged 500 - 1000 times, giving you years of use. They'll give your high-power devices such as flashlight, radios, solar devices, and more plenty of life..
  • CROSS-REFERENCE: Before ordering this battery backup, be sure to check that the product is compatible with the battery's chemistry, size, amperage, polarity, and voltage..
Check Stock

SHT31 Temperature & SHT31-D Humidity Sensor Module Breakout Weather for Arduino

  • The ESP8266 Weather Station IoT Starter Kit includes an ESP8266 ESP-12E Development Board, a 0.96" OLED display, a DHT11 Temperature and Humidity....
  • Developer-friendly module ESP8266 come with a USB connector and the maximum number of available pins. ESP8266 full IO mouth leads directly download....
  • The 0.96" 128x64 pixel OLED display supports I2C, wide viewing angle, low power consumption and high response speed.
  • DHT11 Temperature and Humidity Sensor with characteristics humidity measurement range: 20~90% RH, humidity measurement accuracy: +/-5% RH, temperature....
  • Four Projects in One – The ESP8266 and Wireless IoT development lets you 4 home projects, including weather station, plane spotter, world clock and....
Check Stock

SAMSUNG SmartThings Hub Dongle for Zigbee Devices; USB Cable Included, Easy Installation (VG-STDB10A/ZA, 2022)

  • YOUR TV AS AN IoT HUB: Use your TV as a hub to create a more connected smart home.
  • Without a separate IoT hub, the SmartThings Dongle expands connection to Zigbee devices with your TV out of the Works With SmartThings (WWST) devices*.
  • CONNECT MORE DEVICES: Use the SmartThings Hub Dongle to seamlessly add Zigbee devices to the TV WiFi Hub**.
  • INSTALLATION IS EASY: To install, simply plug the provided USB cable into your TV.
  • A USB cable is included with your purchase of the SmartThings Hub Dongle.
Check Stock

Fortinet FortiGate-100E License 1 YR FortiGuard IPS FC-10-FG1HE-108-02-12

  • Hassle-Free Configuration: One single-pane-of-glass dashboard makes for simple switch configuration, management, and troubleshooting..
  • Security Fabric Integration: FortiGate management of FortiSwitch extends Security Fabric features to the Ethernet access layer..
  • Flexible Management: Deploy and manage switches through the FortiGate interface, with a cloud management option through FortiGate Cloud, or manage as a standalone switch through CLI, API, GUI or the cloud with FortiSwitch Cloud..
  • Power IoT Devices: Enable Internet-of-Things (IoT) devices, voice, data, and wireless traffic across a single network..
  • Unparalleled Security: Secure all devices across your network with a simple, unified dashboard..
Check Stock