ReviewsIpl 1000w Rf 10mhz

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock

2902832, Frequency transducer, F Input: 0.002Hz-20kHz, Out: V/I, Screw Conn, Mini MCR-SL-F-UI-NC

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
Check Stock

Mixer Module, 0.1‑500MHz Low Distortion High Frequency Transducer -10dBm Conversion for Base Station for Quadrature Modulation for HF VHF Receiver

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

High Frequency Transducer, Mixer Module 0.1‑500MHz Bandwidth Mixing for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

FrSky Tandem X20S Transmitter with Built-in 900M/2.5G Dual-Band Internal RF Module

  • Built-in TD 900M/2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16Mode (Compatible with ACCST Receivers with D16 V2 or later FW) 2.4G ACCESSMode (Compatible with ACCESS Receivers) 900M ACCESSMode (Compatible with ACCESS R9 868/915MHz Receivers) (*Capable of simultaneous working under ACCESS mode) 2.4G & 900M TD Mode (Compatible with TD Receivers).
  • Super-low latency and long-range control with telemetry (*Up to 50 to 100KM range and down to 4ms end-to-end latency) 800*480 Color Touch-Screen Displays 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear) Lite Type External Module Bay Built-in 6-axis Gyroscope Sensor All CNC Metal Trims, Knobs.
  • Haptic Vibration Alerts and Voice Speech Outputs Supports SWR Indicator Warning Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface) High-speed PARA Wireless Training System (Compatible with FreeLink App3.0) Built-in Audio Wireless Module (Compatible with Bluetooth Audio Device).
  • All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing, adjustable 45° to 60° stcik travel and 8° rotatable panel. ETHOS: The more pow....
Check Stock

Raddy RF750 Portable Shortwave Radio AM/FM/SW/WB Receiver with Bluetooth and NOAA Alerts + Raddy RF75A APP Control Shortwave Radio with Bluetooth, Portable AM/FM/VHF/SW/WB Receiver Pocket Radio

  • ...d music player. ❷ RF750 added a 9.85' wire antenna, strengthening the reception to pick up more stations. ❸ It comes with USB-C charging port and a removable lithium battery. ❹ It is a preparedness radio with NOAA weather alert..
  • AM/FM/SW/WB Radio: RF750 can tune in to your favorite AM (520-1710KHz), FM (87-108MHz), or SW (5.7-17.9MHz) frequencies, but also pick up the weather band (162.400-162.550MHz) and get alerts about NOAA weather hazards in your area..
  • APP Control SW Radio: Thanks to the app intelligent remote control and Bluetooth 5.0 features, you can enjoy the convenience of RF75A. With its intuitive user interface and powerful wireless capabilities, you can easily control your radio from your devices(support iOS, Android, and HarmonyOS systems)..
  • RF75A with Wider Reception Range: Listen to FM, VHF, AM, SW, and WB, and stay up-to-date with your favorite radio shows and music with this powerful multi-band receiver. RF75A has a wider range of shortwave frequencies compared to the RF750..
  • RF75A Personal Music Player: Boost your music experience with this all-in-one outdoor audio system. With Bluetooth 5.0 feature, a 3.5mm earphone socket, and a TF card socket, you can easily connect to your personal audio devices and connect to your computer ....
Check Stock

All-New Portable Spectrum Analyzer 35MHz~4400MHz ADF4351 Handheld Frequency Tiny Tester HF UHF VHF 4.3 inch Screen Bnc SMA Port

  • Frequency Range: 35Mhz~4400Mhz, frequency can be set..
  • Scanning Time: 800ms, quick and realtime.
  • Span and dbm range: 35Mhz to 350Mhz, can be set.- 80dB ~10dB.
  • Service: aluminum alloy shell with better Rf performance. If any question, send us a email, we will reply soon..
Check Stock

Shure SLXD4D Dual Channel Wireless Receiver (Transmitters Sold Separately)

  • COMPONENT ONLY: For this SLXD4 receiver to work, please make sure it matches the frequency band (style) on your SLX-D digital wireless transmitter..
  • WHAT'S IN THE BOX: (1) SLXD4D dual-channel receiver with antenna and rackmount accessories.
  • DIGITAL WIRELESS TECHNOLOGY: Digital predictive switching diversity. 44 MHz tuning bandwidth (region dependent). 32 available channels per frequency band (region dependent). Up to 10 compatible systems per 6MHz TV band.
  • 12 systems per 8 MHz band. RF Scan and IR Sync to quickly find an open frequency and link the transmitter to a SLX-D receiver. Easy pairing of transmitters and receivers over IR scan and sync..
  • SOUND QUALITY: Crystal clear 24-bit / 48 kHz digital audio. Extended 20 Hz to 20 kHz frequency response (microphone dependent) for natural and clear sound. Stable digital RF signal transmission. 120 dB dynamic range - excellent for vocals & acoustic and wind instruments..
  • APPLICATIONS: A variety of compatible microphone/instrument cable choices guarantees the right solution for a wide range of applications, from day-long presentations to nighttime performances..
  • LEGENDARY SHURE ENGINEERING: Durable and ergonomic plastic transmitter construction..
Check Stock

Shure SLXD4D Dual Channel Wireless Receiver (Transmitters Sold Separately)

  • COMPONENT ONLY: For this SLXD4 receiver to work, please make sure it matches the frequency band (style) on your SLX-D digital wireless transmitter..
  • WHAT'S IN THE BOX: (1) SLXD4D dual-channel receiver with antenna and rackmount accessories.
  • DIGITAL WIRELESS TECHNOLOGY: Digital predictive switching diversity. 44 MHz tuning bandwidth (region dependent). 32 available channels per frequency band (region dependent). Up to 10 compatible systems per 6MHz TV band.
  • 12 systems per 8 MHz band. RF Scan and IR Sync to quickly find an open frequency and link the transmitter to a SLX-D receiver. Easy pairing of transmitters and receivers over IR scan and sync..
  • SOUND QUALITY: Crystal clear 24-bit / 48 kHz digital audio. Extended 20 Hz to 20 kHz frequency response (microphone dependent) for natural and clear sound. Stable digital RF signal transmission. 120 dB dynamic range - excellent for vocals & acoustic and wind instruments..
  • APPLICATIONS: A variety of compatible microphone/instrument cable choices guarantees the right solution for a wide range of applications, from day-long presentations to nighttime performances..
  • LEGENDARY SHURE ENGINEERING: Durable and ergonomic plastic transmitter construction..
Check Stock

LVFEIER Anti Radiation Maternity Tank (Extra Large) Silver

  • The fabric provides 30-35 dB RF radiation attenuation from 10 MHz to 3 GHz and beyond.
  • Wear this dress top to reduce the risks of everyday radiation for your unborn child, it blocks excess RF radiation but not for fully blocking cell phone signals purpose.
  • Comfortable and safe on skin. Be certain it’s authentic OurSure Brand.
  • Care, hand wash, air dry, do not bleach, do not dry clean.
Check Stock