ReviewsIr Kit For Cable Box

TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable for Cable Box Home Theater AV Component Equipment HDTV

  • An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look.
  • IR Repeater system allows you to Control home theater components located behind cabinet doors.
  • Included with the system is - IR Receiver (2 inches by 1/2 Inch).
  • Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches).
  • Convenient IR confirmation LED with dual frequency to support infrared signals from a wider range of IR remote control such as cable box setup box STB.
  • Support up to six emitter output connections.
  • Additional IR emitter blaster available for purchase at ASIN: B017LQAKXW.
  • If you need to extend the IR blaster emitter cable, you can use a 3.5mm stereo audio extension cable and a 2.5mm to 3.5mm adapter at one end and a 3.5mm to 2.5mm adapter at the other end.
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver 10FT

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the....
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip:....
Check Stock

Small 38-56kHz External IR Receiver Extender Works Selected Cable Providers Boxes Including - Verizon FiOS, Comcast Xfinity X1, Cox, Charter, Spectrum DVR and Cable Boxes See Compatibility Chart

  • HDTV Hookup New 9.8ft Add on IR Receiver is a perfect addition, so you can hide your Cable Box and other products, so they are out of mind..
  • Smallest Size – at 21mm x 12mm this is by far the smallest less obtrusive IR Receiver..
  • Full IR Frequency range for todays technology at 38Khz and 56Khz. With a supporting distance of 40ft @38KHz and 25ft @56 KHz..
  • REPLACeS Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323.
  • Works with Easy to Install and Use - Allows you to hide your equipment and operate the equipment remotely. Simple plug and play. Unplug the power from the cable box then plug the IR receiver into the IR IN port. Plug in the power for the box.-.
Check Stock

TESmart HDMI KVM Extender 1080P Over Single Cat5e/6 Cable Up to 50m/164ft, 2 USB Ports for Keyboard and Mouse to Control Remote Signals, EDID, IR Pass Though (Transmitter and Receiver)

  • 【50m/164ft Stable Transmission】:The KVM Extender kit allows access to a computer system from a remote console (USB keyboard and mouse). It can point to point deliver the video, stereo audio, USB signals up to 50 meters using single UTP/FTP cable(CAT5E/6, should follow ELA/TIA 568B standard )..
  • 【IR Pass Through】Support use the included IR cables to control a HDMI video input device like DVD player , Set-top box and streaming box from the remote display end . You canget the same effect as if you were using the remote control directly from the input..
  • 【1080P@60Hz Superior Video Quality】:The Extender enables remote high-speed access to a single computer at HD display resolution while improving workplace ergonomics and separating employees from a noisy working environment..
  • 【USB & KVM Function】On the receiver side, can connect the mouse and keyboard to control the remote signal source on the transmitter side, very suitable for computers, systems, etc.(Tips：no other USB devices are supported.).
  • 【Application】It is widely used in monitoring systems, conference systems, home theaters, home security system, restaurant projection, outdoor advertising, data security, ticket offices, Internet cafe systems and more. For the harsh environment, com....
Check Stock

BAFX Products - Extra IR Receiver for BAFX Products IR (Infrared) Repeater Kit / Remote Control Extender Kits

  • INTEGRATE – Our Peephole IR receiver for the BAFX Products Single Zone Repeater kit is designed to be mounted in a wall, cabinet or door so you have more sleek, streamlined look to your setup! This will require you drill a ½” hole in your wall or cabinet, slide the peephole receiver in and tighten using a 5/8” wrench..
  • FUNCTIONALITY – Our IR sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Can be used with any IR remote controls. Cable is 5’ long from tip to tip with actual cable length of 4’ 10”. Works with any Make model of remote controls as long as they use Infrared technology..
  • COMPATABILITY – Compatible with the BAFX Products Single Zone IR Repeater / Remote Control Extender Kit ONLY! May not work with other brands of Infrared Repeater Kits! Does NOT work with BAFX Products Triple Zone or Wireless Kits!.
  • IMPORTANT – This IR Receiver is not designed to be plugged directly into a devices IR port. Doing so will not work and may cause undesirable operation of your device..
  • WARRANTY – 1 Year warranty against manufacturing defects provided by BAFX Products. Don’t worry if something goes wrong, BAFX Products is ready to help with friendly USA based support!.
Check Stock

BAFX Products (Infrared) IR Remote Control Extender or IR Repeater Kit - Control 1 to 8 Devices (Expandable to 12!)

  • BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control..
  • IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!.
  • WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!.
  • COMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!.
  • CONTROL – With the provided components you can control up to 8 inf....
Check Stock

Infrared Resources External Universal IR Receiver Extender for VERIZON FIOS, SA/Cisco Explorer, Comcast, Samsung,PACE,Motorola,Arris,

  • AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR (NOT SERIAL) LOCATED ON THE BACK OF THE CABLE BOX. LOOK UP YOUR MAKE AND MODEL NUMBER USER GUIDE ONLINE. REFER TO THE BACK PANEL PAGE. PLEASE EMAIL OR CALL US IF YOU REQUIRE OUR ASSISTANCE. All units are bench tested and working before leaving the factory. Refer to the trouble shooting section on the original package if need be..
  • Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola, Arris, and DTA Set Top Boxes with active IR IN, EXT IR or IR Input as stated in the first bullet point section.
  • WILL NOT WORK WITH: ( IR port reserved for future use) Scientific Atlanta Explorer HDC series 4200,4240,4250,8300,8240,8260 or other HDC models A/V Stereo Receivers, TVs or IR.
  • REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323.
  • 27 Years Experience Designing, Manufacturing And Supplying The Cable, Hospitality, and Retail Industry.
Check Stock

RuiLing 1-Pack 3.5mm IR Infrared Emission Line Remote Control Receiver Extension Cord Cable 1m

  • Package: 1 piece remote control extenders, light-weight, small-size and solid, commonly used when your receiver is hidden away in a cupboard, in a different room, or behind your TV..
  • Connector: Come with a standard universal 3.5mm jack male plug at one end and an IR emitter at the other, 1m cable long enough to position the sensor in anywhere in your house..
  • High Sensitivity: Real time transmission without any delay with its high sensitivity sensor. 38kHz frequency range, compatible with various of electronic products and appliances..
  • Purpose: Used with an IR Repeater kit to control a device, allow you to extend remote control ability to a location that the remote control or IR repeater system block can't reach..
  • Application: Allows you to control A/V component by the existing IR controller, such as set-top box, stereo receiver, car audio system, hard disk player, Satellite TV receiver, CD player, DVD player, Bluray player or other components..
Check Stock

StarTech.com HDMI Over Fiber Extender (LC) - 4K 60Hz HDMI 2.0-3300ft (1km) Over Single Mode - 1000ft (300m) Over Multimode Fiber Optic Cable - Transmitter/Receiver AV Converter Kit (ST121HD20FXA)

  • HDMI OVER FIBER EXTENDER KIT: Extend an Ultra HD (UHD) 4K 60Hz HDMI 2.0 signal + 7.1 CH audio up to 3280ft (1km) over single mode or up to 985ft (300m) over multimode fiber cabling w/ an LC connector.
  • RELIABLE VIDEO TRANSMISSION: Fiber connection allows for uncompressed and uninterrupted video transmission & Electromagnetic interference (EMI) immunity and optical isolation for reliable signal integrity.
  • 3x Status LEDs for power/optical link/HDMI link.
  • SERIAL AND IR EXTENSION: Extend serial or IR signals over the fiber cable.
  • IR control extension kit includes 2x IR Receivers & 2x IR Blasters (IR remote not included).
  • RS-232 terminal block connectors for device or display control (up to 115.2Kbps).
  • EASY INSTALLATION: Point to Point connection between AV transmitter and receiver.
  • No IP configuration/drivers/network equipment required.
  • Durable steel housing w/ built-in mounting hardware for a tidy installation.
Check Stock

WenkeDigi IR Infrared Repeater System kit, IR Repeater Extender, Max 100 Feet Efficient Receiver Range - IR Remote Control Hidden Devices -10 Feet IR Receiver Cable (Can Run 400 Feet by Your Cat5e)

  • ...ossible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight ..
  • [ PACKAGE INCLUDE] 1x IR Metal Connecting Block, 4 x Single IR Emitters (Controls 4 Devices), 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mounting Screws and 1x Manual. Length of either Receiver cable or Transmit cable is 3 meters ..
  • [WARRANTY] 1 Year Limited Warranty and Lifetime Product Support ..
Check Stock

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

  • IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
  • Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
  • Place the IR emitter blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
  • Compatible with most A/V equipment with infrared sensors (not RF).
Check Stock