ReviewsIron Studs Applying Machine

Calculs Unicorn Iron On Transfers for Birthday Girl 20 Pcs Small HTV Decorations Stickers for Canvas Bag, Unicorn Accessories, Baby's Clothing

...w item. Cotton or cotton blend fabric works best for iron-on transfers. Other types of fabric may melt from the heat of the iron. You can also use wool, silk, velveteen, velour, denim (the softer, the better) and lycra. Heat press machine and household iron are both available..
▶Make sure the surface is flat while applying the transfer. You need to have a solid wooden board on top of the ironing board to prevent the mesh dissipating the heat when you apply the transfer. Set the temperature of the iron between 150℃ and 180℃(300 to 350℉) so it can transfer onto the fabric properly, but do not use steam. Steam can greatly hinder the transfer's ability to adhere to the fabric. Disperse the iron's heat evenly..
▶Check to make sure the edges of the transfer are fully attached before you move onto removing the backing paper. If the edges are not fully stuck to the fabric, continue to iron the edges of the transfer. Be sure to apply steady and even pressure as you iron so the complete image is fully attached. Wait at least 24 hours after you've applied the iron on transfer before you wash your fabric. Only wash and dry your fabric on a cool setting..
▶Made of high quality and environmentally friendly materials, these transfer vinyl papers are very e....

Check Stock

Dr Seuss Thing 1 Thing 2 Edible Icing Image Photo Cake Topper Sheet Birthday Party Baby Shower - 1/4 Sheet - 78189 by Sweet Cakes,Red

...w item. Cotton or cotton blend fabric works best for iron-on transfers. Other types of fabric may melt from the heat of the iron. You can also use wool, silk, velveteen, velour, denim (the softer, the better) and lycra. Heat press machine and household iron are both available..
▶Make sure the surface is flat while applying the transfer. You need to have a solid wooden board on top of the ironing board to prevent the mesh dissipating the heat when you apply the transfer. Set the temperature of the iron between 150℃ and 180℃(300 to 350℉) so it can transfer onto the fabric properly, but do not use steam. Steam can greatly hinder the transfer's ability to adhere to the fabric. Disperse the iron's heat evenly..
▶Check to make sure the edges of the transfer are fully attached before you move onto removing the backing paper. If the edges are not fully stuck to the fabric, continue to iron the edges of the transfer. Be sure to apply steady and even pressure as you iron so the complete image is fully attached. Wait at least 24 hours after you've applied the iron on transfer before you wash your fabric. Only wash and dry your fabric on a cool setting..
▶Made of high quality and environmentally friendly materials, these transfer vinyl papers are very e....

Check Stock

Gollnwe Men's Tuxedo Shirt Wing Collar French Cuffs with Cufflinks and Bow Tie White S

FABRIC: 96.5% cotton 3.6% spandex, soft, smooth, silk hand feeling, breathable, comfortable against the skin, definite stretch cotton fabric..
DESIGN: this classic wingtip collar tuxedo shirt includes a black bow-tie and a pair of mental cufflinks, a convertible placket that can be worn buttoned or with up to 4 studs, all buttons are break-resistant, cross-stitched..
OCCASIONS: Suitable for many accasions, such as wedding, a concert performance, and so on. Also gift idea for dad, boyfriend or brothers..
UNDERSTATED STYLE: This white dress shirt is easy to wear, it goes well with any tuxedos, tuxedo vests, jackets, pants and men's formal accessories..
EASY CARE: Hand wash or machine wash cold.

Check Stock

Customadeonly 2 Pieces 1.25' Hub Centric Wheel Spacers Adapters Bolt Pattern 5x105 to 5x105 Thread Pitch 12x1.5 Center Bore 56.5mm Fits 2010-2017 Chevy Cruz Sonic Trax Volt

Please be sure to confirm the fitment & compatibitliy prior to purchase - If you are not sure if this is applicable to your vehicle -please feel free to ask us! Fits 2010-2017 Chevy Cruz, 2012-2017 Chevy Sonic, 2013-2017 Chevy Trax,2017 Chevy Volt.
QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
Made with high grade T-6 Aluminum - CNC machined with precised fit.
Carbon steel wheel studs- machine pressed (Extremely durable).
Fits Vehicles with Bolt Pattern in 5x105, Center Bore: 56.5mm and Thread Pitch : 12x1.5 -Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs.

Check Stock

HTVRONT Iron on Patches for Clothing Repair, 20 PCS Multi-Colored Fabric Patches for Clothes Repair, 20 Shades Iron Patches for Clothes, Clothing Repair Decorating Kit 3.7" by 4.9"

... clothes. The free sewing kit is included for ensuring the bond firm..
【EASY TO APPLY】You could use this patches for clothes to decorate, repair and reinforce the garments. The fabric patches could directly be cut into the shape and pattern you want. CAUTION: pay more attention on the edges avoiding curling when applying the iron patches for clothes. Please feel free to contact us if you are not satisfied with patches iron on..

Check Stock

2 Pieces 1" 25mm Custom Lug Centric Wheel Spacers Adapters Bolt Pattern 4x100 to 4x100 Thread Pitch 12x1.5 Center Bore 67.1mm Compatible for Miata Mx-3 Drift JDM NA NB

Please be sure to confirm the fitment & compatibility prior to purchase - If you are not sure if this is applicable to your vehicle -please feel free to ask us!.
QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
Made with high grade T-6 Aluminum - CNC machined with precised fit.
Carbon steel wheel studs- machine pressed (Extremely durable).
Compatible for vehicles that are in 4x100 bolt pattern & 12x1.5 thread pitch and with center bore that is smaller than 67.1mm. Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs..

Check Stock

Calculs Iron on Transfers Unicorn for Birthday Girl Magical HTV Decorations for Kid's T-Shirts, Bed Sheet Set, Cushions - Glitter Eco-Friendly 21Pcs

... fabric may melt from the heat of the iron. You can also use wool, silk, velveteen, velour, denim (the softer, the better) and lycra. Heat press machine and household iron are both available..
▶Trim around the transfer image will help make your transfer on image appear seamless. Make sure the surface is flat while applying the transfer. You need to have a solid wooden board on top of the ironing board to prevent the mesh dissipating the heat when you apply the transfer. Set your iron to the hottest setting so it can transfer onto the fabric properly, but do not use steam. Steam can greatly hinder the transfer's ability to adhere to the fabric. Disperse the iron's heat evenly..
▶Check to make sure the edges of the transfer are fully attached before you move onto removing the backing paper. If the edges are not fully stuck to the fabric, continue to iron the edges of the transfer. Be sure to apply steady and even pressure as you iron so the complete image is fully attached. Wait at least 24 hours after you've applied the iron on transfer before you wash your fabric. Only wash and dry your fabric on a cool setting..
▶Made of high quality and environmentally friendly materials, these transfer vinyl papers are very elastic so that the fabric with image....

Check Stock

Calculs Unicorn Birthday Iron on Transfers for Birthday Girl Magical HTV Decorations Stickers for Kid's T-Shirts, Bed Sheet Set, Cushions - Glitter Eco-Friendly 6Pcs

...w item. Cotton or cotton blend fabric works best for iron-on transfers. Other types of fabric may melt from the heat of the iron. You can also use wool, silk, velveteen, velour, denim (the softer, the better) and lycra. Heat press machine and household iron are both available..
▶Make sure the surface is flat while applying the transfer. You need to have a solid wooden board on top of the ironing board to prevent the mesh dissipating the heat when you apply the transfer. Set the temperature of the iron between 150℃ and 180℃(300 to 350℉) so it can transfer onto the fabric properly, but do not use steam. Steam can greatly hinder the transfer's ability to adhere to the fabric. Disperse the iron's heat evenly..
▶Check to make sure the edges of the transfer are fully attached before you move onto removing the backing paper. If the edges are not fully stuck to the fabric, continue to iron the edges of the transfer. Be sure to apply steady and even pressure as you iron so the complete image is fully attached. Wait at least 24 hours after you've applied the iron on transfer before you wash your fabric. Only wash and dry your fabric on a cool setting..
▶Made of high quality and environmentally friendly materials, these transfer vinyl papers are very e....

Check Stock

3M Claw Drywall Picture Hangers Holds 45 lb. & Command Jumbo Universal Picture Hanger, 3 Hangers

Contains bundle of 3M CLAW Drywall Picture Hangers holds 45 lb. & Command Jumbo Universal Picture Hanger, 3 Hangers.
3M CLAW: Trusted strength proven to hold up to 45 pounds. Includes a Spot Marker to mark where the mirror or art piece will hang before applying the 3M CLAW Drywall Picture Hanger..
3M CLAW: No tools required – Just push in with your thumbs. No studs – Hang anywhere on drywall. No regrets – No big holes left in your walls..
Command Jumbo Universal Picture Hanger includes 3 hangers and 8 strips. Holds up to 8 pounds..
Command Jumbo Universal Picture Hanger: damage free hanging..

Check Stock

YORANYO 80 Sets Mixed Shape Spikes and Studs Assorted Sizes Spike Studs for Clothing Silver Color Screw Back Bullet Cone Studs and Spikes Rivet for Leather Craft Clothing Shoes Belts Bags Dog Collars

➤ Durable Material ---- Spikes and Studs Made of Zinc Alloy, Screws Made of Iron. Each Spike is Smooth with a Fine Finish, and with no Casting....
➤ Sizes and Colors ---- Assorted 21 Different sizes ❤ Color: Silver. ❤ 80 Sets Different Designs and Sizes Screwback Studs Along with 2pcs Tools....
➤ Package Contains ---- 80 Sets Spikes Studs with Screws and Installation Tools. ❤ Coming with Plastic Storage Box..
➤ Easy to Use ---- Coming with Install Tools. These are Pretty Sharp and You Will Love Them! Just Need Punch a Hole and Screw on.They Will....
➤ Wide Application ---- Amazing Idea for Decorating Your Bags, Shoes, Belts, Jacket, Dog Collar, Garments, Clothing and more leather craft DIY....

Check Stock

1408 Pieces Iron on Letters and Numbers 0.75 Inch Heat Transfer Letters Numbers Adhesive Letters Applique DIY Fabric Vinyl Alphabets for Clothing Printing Crafts Decorations, 16 Sheets (Black)

...can use them to form meaningful words, sentences, dates, texts and other contents, print on your clothes to get couple wear or family wear in daily life.
Finished crafts made by your own hands will be full of personalized style, and ideal to be gifts for your friends, family members, lover and other people you love.
Applying method: you can conveniently print these iron on letters or numbers on your clothes, just choose your combination or design and put on your clothes or bags, then use heat transfer machine or iron at the temperature of 284-320 degrees Fahrenheit, to press for about 10-15 seconds, you will get a customized craft with DIY ideas applied.
This easy-operating set is suitable for both beginners and skilled people.

Check Stock