ReviewsIscar Drilling Tools

Drill America GLBCOX65/32 5/32' x 6' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 6" overall length for drilling where extra length for reach is required.
Check Stock

Essential Rob Halford

  • ✅ [18+1 Position Clutch] - The 18 torque of the cordless drill allows for various screwing applications and an additional 1 torque for drilling wood/metal/plastic. Multi-position clutch provides precise control of drilling to prevent screws from sinking too deep, falling off screw heads or even breaking screw shafts..
  • ✅ [20 Voltage & 266 In-lbs Max Torque] - This 20V high voltage cordless drill driver will provide up to 266 In-lbs (30N.m Max) torque rotation strength to overcome resistance..
  • ✅ [2 Variable Speeds] - Featuring a 2-variable-speed switch (0-350 and 0-1350 RPM), combined with an adjustable clutch gives you the versatility to drill different materials and use a variety of bits. Low speed for screwing and high speed for drilling..
  • ✅ [Household Hand Tools & 14” Pink Storage Bag] - The home tool set comes with many hand tools including slip joint pliers, groove joint pliers, adjustable wrench, long nose pliers, magnetic screwdriver holder, screwdriver bits, utility knife, tape measure, etc. The 14" Pink women's tool bag is great for home improvement and DIY projects..
  • ✅ [3/8” Keyless Chuck] - The 3/8" keyless chuck allows the cordless drill to use a variety of bits for common tasks around the house. With the Forward/Reverse switch y....
Check Stock

jar-owl Daily Household Tool Set with Drill, 21V Cordless Drill Drive Set with 112pcs Combo Hand Tool Kit for Mens Home Repair

  • 【21V CORDLESS DRILL】Includes 21V Lithium drill for a variety of home projects, The 18+1 speed adjustable 21V cordless hammer drill can drill into wood,metal,plastic,etc. Max drilling capacity is 22mm(7/8"") for wood, 10mm(3/8"") for steel. 2-Gear-option with max torque 350 in-lbs for high (0-1350rpm) or low (0-350rpm) speed drilling/driving speeds..
  • 【EFFICIENT BATTERY】The powerful cordless screw drill driver has one 1.3Amh battery for easy operation. Powered by 1.3 Lithium Ion and charger. The charger runs at standard US 110/120 volt. It just takes you 60-min to be full charged which save up to 50% time than others and its cycle life is more than 250 time. This battery provides power for up to 8Nm of forward..
  • 【3/8" KEYLESS CHUCK&VARIABLE TRIGGER】The electric drill has 10mm 3/8" keyless ratcheting chuck can hold the bits without falling off and stop working, make them good for general purpose drilling. Variable speed trigger allow you to select different speeds on the task at hand. A flexible shaft could be used in some places where driver bits are hard to reach. Cordless tool is perfect for home, household, garage, car trunk, mechanic projects and bike repair..
  • 【MULTI-FUNCTIONAL TOOL KIT】This professional home power tool drill set ....
Check Stock

35mm Concealed Hinge Jig Kit, Woodworking Tool Drill Bits Hinge Drilling Hole Router Jig for Cabinet Cupboard Door Installation

  • Hinge punching locator: This hinge drilling hole router jig kit is the most useful tool for using concealed hinges for your doors..
  • ABS plastic material: 35mm hinge drilling jig is made of high quality engineering plastic, this hinge hole drill guide is durable. This is a set of drill guide tool used for convenient hinge hole drilling, light and portable, easy to operate..
  • Easy to use: Suitable for their own home operation, do not need professionals. Simple to use with any drillno special tools needed. Make cabinet door installation easy..
  • Efficient high precision drilling: You may speed up 50% comparing with the traditional drilling method and can make all flat-bottomed holes of the exact size..
  • Application: 35mm hinge drilling jig comes with a 35mm forstner bit and depth stop. The concealed hinge jig is suitable for 35mm hinges..
Check Stock

Diamond Drill Bit Set 1.5mm 20 Pieces Compatible with Dremel Collets Included Twist Tip Jewelry Beach Sea Glass Shells Gemstones Lapidary Ornament Bracelet Necklace Arts Crafts

  • PREMIUM QUALITY 20 pcs Set of 1.5mm Drilax Diamond Drill Bits..
  • PRECISION TOOLS for drilling holes in sea shell, sea glass, beads, tough stones, gemstones, pebbles, precious and semi-precious stones, porcelain, optical material, composites and even rocks..
  • TOOLS for Jewelry Designers for drilling clean holes for making Earrings, Pendents and Bracelets. They have multiple layers of industrial diamond particles bonded to body which provides longer drill life..
  • FITS Dremel-Type Rotary Tool or Small Precision Drill Press with an adjustable collet..
  • COOLING WATER NEEDED – High Quality Diamond Coated Drill Bits 20 pieces – Wet Type (water to be used during drilling).
Check Stock

Virginia Abrasives 425-03041 Diamond Drill Core Bits For Tools & Home Improvement – Premium Diamond Concrete Drill Bit For Brick, Concrete, & Masonry – General Purpose Wet Cutting, 4″ x 14″ x 1-1/4″-7 in Size

  • PREMIUM CORE BIT LINE: Our diamond core drill bits are manufactured with a high concentration of industrial diamonds so they will stand up to the heavy workload of your project. Our core drill bit line has 7.5 mm general-purpose segments that offer precision for drilling concrete, block, masonry, natural stone, and hardscape aggregates. Diamond drilling produces little dust.
  • MULTI-COMPATIBLE: Core drill bits, when used with a compatible core drill, work well to drill holes in stone, concrete, and masonry so you can finally finish your long-term or urgent projects! At Virginia Abrasives, we emphasize your convenience.
  • that’s why we created masonry drill bit/concrete tools that are compatible to use as a core drill or wall drill for concrete, masonry, general-purpose concrete, and asphalt..
  • CLEAN CUTS & DRILL: Our diamond core drill bit is known for its clean cut and will give you much more reliability for a more pristine drilling result! Cutting is more accurate using our diamond bits so there is less chance of structural integrity being compromised. Our concrete drill bits are portable, and can be used in situations where space is limited..
  • PROPER CARE & INTENDED USE: These home improvement tools are intended for....
Check Stock

Husqvarna 585829901 Snowblower Drive Belt Genuine Original Equipment Manufacturer (OEM) Part

  • Roomy cab with large roof overhang protects operator from wind, sleet and snow.
  • Compatible with: ST224, ST230P, ST227P, ST324P, ST327P, ST330P, ST224P, ST324, ST327, ST330.
  • Heavy duty fabric shell with freeze-resistant, super-clear vinyl windows. Rugged powder-coated steel frame. No drilling- installs with standard hand tools. Fabric is coated for maximum water resistance and repellency.
  • won't shrink or stretch. Rugged powder-coated steel frame resists rust..
  • No drilling- installs with standard hand tools.
Check Stock

Mobil Mobilcut 100 Aqueous Metal Working Fluids [5 Gal. Pail]

  • Step Drill Bit Best Friend: Evo Dyne’s Cutting Oil (8 fl oz) works under High Pressure on power, manual metal cutting, & drilling machines. Works great for all metals including stainless steel and titanium! With our aluminum cutting oil, not only does it lubricate to minimize tip welding, boosts machine finishing, prevents metal seizures & pitting, but it also provides the cleanest cuts on the market!.
  • Multi-Purpose Solution: Also known as a Cutting Fluid, our propriety formula improves the performance and Extends the Life of your drilling & cutting tools as well as power drills & machining equipment. Evo Dyne’s Cutting fluids provides the tack needed for hand drilling and thread cutting making for a safer working environment.
  • Improved Performance: Our aluminium cutting fluid for metal drilling reduces heat and damage caused by friction & also makes mechanical processing of metals easier. With the finest thread cutting oil on the market, you can ensure a high-quality finish of your work while prolonging the life of your equipment.
  • Cutting Oil Made Easy: For the best outcome, apply the Cutting Oil between the cutting tool and workpiece as needed through the duration of work. Maximize your speed and feed time with our simple to use threading oil. This....
Check Stock

Drill America DMOD1/8 1/8 Solid Carbide Drill Bit DMOD Series

  • Designed for drilling abrasive materials when drilling accuracy must be maintained.
  • Can be used in high temperature drilling applications.
  • Used on materials such as cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, bronze, hard rubber, plexiglass, and other similar....
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle.
  • Must be used with a rigid tool-holding systems..
Check Stock

2.5mm Diamond Drill Bit Set 20 Pieces Twist Tip Drilling Sea Glass Shells Rocks for Ornaments Jewelry Necklace Earrings Pendants Bracelets Ceramic Porcelain Gems Includes Collet Compatible with Dremel

  • PREMIUM QUALITY 20 pcs Set of 2.5 mm Diamond Drill Bits Compatible with Dremel Brass Collet Included.
  • PRECISION TOOLS for drilling holes in sea shell, sea glass, beads, tough stones, gemstones, pebbles, precious and semi-precious stones, porcelain, optical material, composites and even rocks..
  • TOOLS for Jewelry Designers for drilling clean holes for making Earrings, Pendants and Bracelets. They have multiple layers of industrial diamond particles bonded to body which provides longer drill life..
  • FITS Dremel-Type Rotary Tool or Small Precision Drill Press. Special 2.5mm Brass Collet Included..
  • COOLING WATER NEEDED - High Quality Diamond Coated Drill Bits 20 pieces - Wet Type (water to be used during drilling).
Check Stock

Dremel 662 Diamond-impregnated Glass Drilling Bit, Rotary Tool Accessory with 3.2 mm Diameter for Drilling and Cutting Glass

  • Dremel accessory (662) diamond impregnated glass drilling bit is designed for straight or curved glass material.
  • Impregnated with full diamond particles which offers superior long life and durability.
  • Ideal for drilling holes in both flat and contoured surfaces eg glass or ceramic wall.
  • Accessory length: 44 mm, Maximum recommended speed: 35000 RPM.
  • Fits with all Dremel Multi-/Rotary tools or other 3,2mm shank size multi- / rotary tools.
Check Stock