ReviewsIsolation Switch

Normally Open Current Switch Adjustable Isolation The AC Current Monitoring Current Detection Protection AC 0.2-30A SZC23-NO-AL-CH

  • Easy To Use: Current sensing switch is self-powered, requires no external power supply, operates at 0.2-30A AC, and can be adjusted with a potentiometer..
  • Convenient And Intuitive: The switch does not limit the number of opening and closing, the reaction speed reaches ms level, and the LED indicator can indicate the working state of the switch..
  • Accurate And Timely: Current switch is a straight-through structure design with isolation withstand voltages up to 2000V and hysteresis of less than 1%. It can be used under strong magnetic conditions..
  • High Quality: High-power MOS tube non-contact electronic switch, the outer casing is made of self-extinguishing material ABS..
  • Widely Used: it is suitable for AC current measurement and monitoring, AC motor overload protection, automatic control system electronic switch..
Check Stock

AC Current Transducer Transmitter Transformer Sensor AC Current Converter AC 0-50A to DC 0-5V SZT15-CH-5V

  • Safe Security: Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • Easy To Use: Easy to install and use, no need to connect DC into the circuit when measuring..
  • Product Specification: Self-powered, no external power supply required. Measured current AC 0-10/20/50A, output signal DC 0-5V. Straight-through structure design, isolation withstand voltage up to 2000V..
  • High Quality：The outer casing is made of self-extinguishing material ABS..
  • Widely Application: Hysteresis is less than 1% and can be used under strong magnetic conditions. Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
Check Stock

STEREN Network Switch - Coax Splitter 2 Way - Antenna Splitter - Manual Transfer Switch - Coax Cable Splitter 2 Way - Coaxial Cable Adapter for TV - 2 Way Coax AB Switch for TV - 1 Pack 200-315

  • COAX CABLE SPLITTER: This is the Steren 200-315 2-Way coaxial cable splitter and AB Switch for TV..
  • 2 WAY COAX SPLITTER: Switch between 2 connections for antenna, cable, satellite or video games..
  • F TYPE COAX CONNECTIONS: Use this RCA switch as a video switcher with F Type coax connections..
  • EASY TO INSTALL: No need to unplug wires when switching between devices with our TV AB switch..
  • HIGH ISOLATION 90 DB AB SWITCH: Eliminate interference from external devices and cross-talk..
Check Stock

Raguso AC Current Transducer, Small Compact Simple Installation AC Current Transmitter Widely Applicable for Home for Industry for Indoor

  • High-quality material: The AC current transmitter is made of high-quality ABS material, which is strong and durable..
  • High accuracy: professional design of transmitter and receiver modules, mutual inductance current monitoring, high current detection accuracy, safe isolation of input and output..
  • Self-powered: The current sensor clip is self-powered, no external power supply is required, and it is easy to use..
  • Withstand voltage: The current sensor relay adopts a straight-through structure design, and the isolation withstand voltage is up to 2000V..
  • Application: AC current sensor is suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system, etc..
Check Stock

iKKEGOL Mini 2-Port RJ45 Network Key-Press Switch Splitter Selector Box 100M 2-in 1-Out or 1-in 2-Out

  • No extend Power, no electrical circuit between inter net and outer net, physical isolation and no electrical interference.
  • Interface: RJ45 100MHz 2 In 1 Out or 1 In 2 Out.
  • Switch freely between intranet and external network signal.
  • Simple and convenient installation, button switch . Long life, switch more than 100,000 times.
  • Mini plastic box: 7.9cm x 5cm x 2.1cm - 3.1inch x 1.96inch x 0.83inch.Net Weight : 48g.
Check Stock

AC Current Switch SZC03-NC-AL-CH Adjustable Current Sensing Switch for Fflash Buzzer Relay and Single-Chip AC 0.5-200A

  • HIGH QUALITY: The shell of current sensing switch is made of self-extinguishing ABS material for long lifespan, durable and safe to use. It has traight-through structure design, isolation withstand voltage up to 2000V, powerful and reliable. Hysteresis is less than 1% and can be used under strong magnetic conditions..
  • GOOD PERFORMANCE: The switch can open and close without limitation, and the reaction speed reaches the ms level, quick response and low power consumption..
  • ADJUSTABLE: This adjustable switch with a potentiometer is self-powered, no external power supply required. Action current 0.5-200A AC..
  • WIDE APPLICATION: The switch is widely used for monitoring current in substations, variable frequency speed control devices, inverter devices and other electric equipment..
  • CONVENIENT: The high-power MOS tube contactless electronic switch is equipped with LED indicator which can conveniently and intuitively indicate the working status of the switch..
Check Stock

TRENDnet 5-Port Gigabit PoE+ Switch, Camera DIP Switch extends PoE+ 200m (656 ft.), 60W PoE Budget, Black, TPE-TG51g

  • Extend PoE+ signal up to 200m (656 ft.) at 10Mbps.
  • DIP switch supports VLAN port isolation and QoS.
Check Stock

LAMPVPATH Pack of 10 cr2032 Battery Holder Coin Cell Holder CR2032 Battery Holder with Switch 1 x 3V CR2032 Button Coin Cell Battery Holder with Leads On Off Switch - Black

  • Battery Holder Type: cr2032 battery holder, cr2032 battery holder with on off switch.
  • Battery Holder Voltage Output: 3V, 1 x 3V CR2032= 3 Volt battery holder.
  • Coin Cell Battery Holder with Switch Function: ON/OFF switch on battery....
  • Dimensions of CR2032 Battery Holder with Switch:(L*W*H)/1.38" x 0.98" x0.24"/3.55cm x 2.55cm x 0.61cm.
  • Wire Leads: coin cell battery holder with leads, tinned wire end.
  • Cable Diameter(count in the PVC isolation around the....
  • Weight of Coin Cell Battery Holder with Switch: 0.11.oz/3.2g.
  • Package Contents: 10Pcs cr2032 coin cell battery holder.
Check Stock

AC Current Transmitter Walfront AC Current Transducer Overload Protector Input AC 0-200A Output DC 0-10V SZT20-CH-10V No Power Required

  • ☛ CURRENT MONITORING -- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • ☛ MEASURE CURRENT RANGE -- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • ☛ STRAIGHT-THROUGH DESIGN -- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • ☛ ABS OUTER CASTING -- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
  • ☛ WIDE APPLICATION -- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
Check Stock

Sentry Industries GX50 Gaming Headset for PS4 / Xbox/PC - Color May Vary (Red, Green, Blue)

  • Folding design - The folding design for the GX50 is perfect for on the go or traveling. When the game is over, easily fold the headset up and store in a safe place.
  • Rotating microphone - never miss a decisive moment when gaming. Our enhance microphone will pick up your voice over any background noise. When the game is over, rotate the microphone up for easy storage.
  • Platform compatibility - the GX50 comes with a 3. 5mm Audio jack and is compatible with gaming platforms at Xbox one, PS4, switch, PC, mobile and more.
  • NOISE ISOLATION - Outside noise can distract you when the game is on the line. The GX100’s noise isolation ear-pads will block sound out with the closed back ear cup design, keeping you focused on the game..
  • Driver: 40mm Frequency: 20hz-20khz impedance: 32 +/- 3 ohms sensitivity: 106dB +/-2dB rated power: 20 maw cord length: 4ft/ 1. 2m.
Check Stock

4NO Joystick Switch 1PCS Joystick Switch,XD2PA14 4NO 4 Position Locked Joy Stick Joystick Switch 4PDT Toggle Switches

  • 【Durable and good performance】Made of high quality material, this switch is durable and has good performance.
  • Rated Impulse Withstand Voltage(Uimp): 6Kv.
  • Operating Temperature: -25~+55℃ (no ice).
  • Operating Humidity: 45~85% (no condensation)..
  • Easy Operation 4 Position Switch: The joystick switch is a latching switch that has 4 normally open contacts, it has 4 normally open contacts..
  • 【Widely used】Widely used for industrial control AC 50Hz and DC circuits.
Check Stock