ReviewsIsuzu Oil Pump

M295 Standard Volume Oil Pump - Compatible with 4.8L, 5.3L, 6.0L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295, 12696357, 12586665

  • M295 STANDARD VOLUME OIL PUMP - A mechanical device that circulates oil to the bearings, camshaft and pistons of an engine. A failed oil pump will cause low oil pressure, engine overheat, and unusually noise from the engin. If you notice any of the symptoms, you will need to have your oil replaced..
  • FIT THE FOLLOWING VEHICLES - Standard volume & standard pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357, 12586665 oil pump, replace Melling M295 oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling oil pump, but it works even better and lasts longer. Save yourself times and money ....
Check Stock

Oil Change Pump Extractor 12v 60w Oil Extractor Pump Oil Pump Extractor Diesel Fluid Scavenge Suction Oil Transfer Pump for Changing Oil Oil Change Pump for Boat Tubes Truck RV ATV Riding Mowe

  • QUICK AND CLEAN OIL CHANGES - Transfer pump for changing oil. Extracting Motor Oil From Your Vehicle Without Mess & Specialized Tools Extract The Oil....
  • ENGINE OIL CHANGE MADE EASY! - The 12v oil extractor pump are very easy to use and makes a top down oil change so easy. Pumps oil out throw dip stick,....
  • FOR DIFFERENTIAL FLUID AND TRANSMISSION FLUID - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just....
  • PROFESSIONAL OIL CLEANING TOOL - The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water,....
  • 100% CUSTOMER SATISFACTION GUARANTEED - 1MANNEW OIL CHANGE PUMP EXTRACTOR - 12 Volt / 5 Amp DC Motor.Ideal Transfer Pump for your quick and clean....
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

BILITOOLS Radiator Coolant Pressure Tester & Vacuum Refill Kit, 28-Piece Universal Cooling System Radiator Leak Tester & Refiller

  • 17 Pieces color coded test caps are designed for testing cooling systems on most domestic and import vehicles. Is compatible with Mercedes-Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Porsche, Audi, etc..
Check Stock

Hand Diesel Transfer Pump,55 gallon drum pump Aluminum alloy corrosion resistant,For 5 to 55 gallon drum

  • Fuel Pump: The hand pump is perfect for transferring various oils, such as fuel oils, diesel, lubricating oil and more. Ideal for use at home, industry, marine, and farms. Note: Not suitable for pumping water or corrosive liquids..
  • Corrosion resistant: This drum pump is made from high quality aluminum alloy, light weight, easy to carry, durable and corrosion resistant..
  • PUMP OIL QUICKLY : Oil Transfer Pump pump oil up to 30L/min,With this hand crank pump, you can pump oil quickly and easily from barrels and oil drums and small tanks..
  • EASY TO OPERATE : Fits 5 gallon to 55 gallon drums, Easy to handle and operate, it can be assembled quickly and disassembled after use for convenient storage..
  • The hand pump hose extends to 24 inches and the hand pump comes in a box for easy portability..
Check Stock

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum housing and gerotor gear design, our oil extractor pump ensures long life and minimal maintenance. With the rugged 230/115-volt AC motor, our oil pump delivers a flow rate of 8 GPM or 32 QPM (30L/min)..
  • HEAVY-DUTY OIL PUMP: The L5132 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. Our high viscosity pump is highly productive when used to pump drums, bulk tanks, waste oil reserves, and other oil containers. Modeled to fit easily to a barrel or drum, this oil extractor quickly transfers all incombustible liquids!.
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long....
Check Stock

THINKWORK Oil Pump Extractor, 12V 80W Marine Oil Change Pump and Electric Oil Pump, with Overheat Protector for Boat, Car, Speedboat, Motorcycle

  • SAFETY&OVERHEATING PROTECTION-Except engine oil, diesel oil and coolant, the oil pump must not pump any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104°F-140°F for about 15 minutes to avoid clogging the oil pump due to the solidification of the oil. When the oil pump is overheated, the newly added overheat protection device will automatically cut off the power supply. At this time, please check whether the hose is blocked or the oil is too sticky..
  • QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
  • UPGRADED OIL PUMP-Everyone needs a portable and small oil pump, simple operation does not need to spend too much time for practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, power generation machinery, tractors , Lawn mowers and various machinery to change the oil..
  • ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the ....
Check Stock

Lawnmower

  • ❥❥❥ Widely Application: It is great for pumping fuel oils, petrol, diesel, lubricating oil, cooking oils and many other oils. BUT DO NOT pump....
  • ❥❥❥ Main Function: With this hand crank pump, you can pump oil quickly and easily from barrels and oil drums and small tanks. Keep this pump in....
  • ❥❥❥ Use Tips: Add some oil that requires pumping into the pump to prime it before you start to pumping oils. Lubricate the pump with grease is....
  • ❥❥❥ Specifications: Main Material: Aluminum Alloy. Inlet Diameter: 3cm / 1.18in. Outlet Diameter: 2.5cm / 0.98in. Length: 124cm / 48.81in.....
Check Stock

Water Sedimenter Separator Fuel Filter for Isuzu NPR NPR-HD NQR75 8971880421

  • Replacement for Part Number 8-97188-042-0 97188042.
  • Fits Models of Isuzu NPR HD NQR 4HE1 4.8L 98-2004.
  • New Aftermarket Diesel Fuel Filter Assembly.
  • Premium Quality to Ensure High Performance, Long Service Life.
  • Good Durability, Reliability, Prevent from Oil Leakage.
Check Stock

TERA PUMP Portable Power Water / Fuel Transfer Battery Pump with Auto-Stop Sensor ( 2.4 GPM )

  • Upgrade 55 Gallon Drum Pump: 32mm Larger Oil outlet tube diameter for quicker oil transfer, Oil outlet pipe length 39 Inch, Overall Length 51 Inch, that can be adjusted to fit 15 - 55 gallon drums..
  • Heavy Duty Barrel Pump: Constructed with Aluminium alloy Steel, heavy duty & rugged, anti-corrosion and anti-rust for more durability..
  • Leak-Free Oil Pump: Our barrel pump is consisted of 3 piece segmented suction tube with screw thread, good sealing effectively prevent oil leakage..
  • Easy to Use Hand Pump: Great Filter at the bottom of the suction tube separate the oil and the oil dirt effectively. Hand Drum Pump Flow Rate 200-250ML (About 16 GPM ) . Support clockwise direction rotary..
  • Widely Used: This rotary barrel pump is suitable for pumping gasoline, kerosene, oil, diesel, hydraulic fluid lubricating oil, other non-corrosive liquids, NOT use for water!.
Check Stock

High Volume Oil Pump Replacement - Compatible with 4.8L 5.3L 6.0L Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295HV

  • REPLACEMENT HIGH VOLUME OIL PUMP - If you have an engine that can rev beyond 6,000 RPM or higher, a high performance or high volume oil pump would probably be a good upgrade and provide added lubrication insurance..
  • FIT THE FOLLOWING VEHICLES - High volume & high pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357 12586665 oil pump, replace Melling M295HV oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling high volume oil pump, but it works even better and lasts longer. Save yourself times and money by replacing high volume oil pump yourself..
Check Stock