ReviewsJ bolt Sets

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
Minimum distance between post and gate should be 1.5.

Check Stock

Battery Hold Down Bracket, Aluminum Alloy Battery Tie Down Bracket for Car Battery Mount Bracket Hold Lock Accessories - with 10 inches J bolts (Silver)

..., 85, 86, 90, 91, 92, 93, 94R,95R, 96R, 97R, 98R, 99, 124 and 140R batteries. Please measure the diameter of the original battery before purchasing to avoid purchasing a product that is not the right size..
【Product Size】The total length of the battery tie down bracket is 218 mm (8.58"), the distance between the bolt centres 190 mm (7.48") and the length of the bolt is 250 mm (10"). For bolts that are too long, the hooks can be cut appropriately..
【Product includes】1x battery hold down bracket, 2x10in J-hooks, 2 sets of accessories (for different mounting styles) - 2x hex nuts and wing nuts, 2x rubber protective sleeves, 2x protective rubber washers, 2x spring lock washers, 2x flat washers. Easy to install and provides stable support for the battery..

Check Stock

J-Bolt Post Hinge 6\ - Hinge Bolts Thru The Post Includes Nuts - J-Bolt Hinge has 5/8\ Male Pin - Fence Bolt Though Post Hinge - Quantity 2

Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5".
J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges.
6" Gate Hinge is made of galvanized steel to prevent rust and corrosion.
J-Bolt thru post hinges are easily adjusted even after the gate is installed.
Nuts for gate hinge are included - Washers are NOT Included.

Check Stock

MEROM Halo Bolt AC Adapter Halo Wall Plug Car Jump Starter Charger Cord Replacement Compatible with Halo Bolt 55720/58830/Halo Bolt 1201 Jump Starter/Bolt ACDC Wireless/Bolt Air Portable

【Specification】For Halo Bolt car jump starter charger AC adapter with 5ft/1.5M long enough power cord, input AC 100V-240V.
【Compatibility】This Replacement Halo Bolt Charger Compatible with HALO BOLT 57720/58830/HALO1201/ACDC 58830 Portable Charger, Car Jump Starter CEN TECH 4 IN 1/3 IN 1 CENTECH Portable Power Pack Battery.
Peak 350 AMP J7CS/J45TK 700 AMP J5C09/STA-J5C09/J312/DPS109/STA-DPS109 Jump Starter.
Solar Jump-N-Carry 660/KKC-660/JNC660/SOLJNC660-BF Jump Starter (NOTE⚠️Pls read carefully above selected models before order⚠️).
【Quality Assurance】This Charger for Halo Bolt car jump starter is made of high quality materials, the wire adopt PVC material to ensure it has a great performance on tensile resistance, anti-aging, anti-corrosion, anti-cracking..
【Security】This Replacement Halo Bolt charger is Tested, approved and certified by FCC, CE and ROHS, and designed with safeguard features against short circuiting, overvoltage, overcurrent, and internal overheating..

Check Stock

Steel J-Bolt Hinge Doors Gates 1/2 Inch Heavy-Duty Welded Hinge Heavy-Duty Driveway Gates for Welding on Larger Iron or Steel Gates, 2 Packs

J-Bolt Hinge is the perfect accessory for your iron gate or revolving door..
J hinges made of heavy and strong iron, you can use it for a long time..
The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
Product dimensions: please see product images..
Package Include: 2 Packs welded hinge, 2 bolts, 4 nuts, and 4 washers..

Check Stock

Signature Fitness SF-3 1,500 Pound Capacity 3” x 3” Power Cage Squat Rack Includes J-Hooks and Safety Straps Other Optional Accessories Red

Dimensions: 83.46" Height, 51.18" Width, 38.78" Depth.
Fully adjustable J-Hook and Safety Strap position - 47 vertical holes and "westside" spacing on bottom half of each upright pole allowing for the....
Built with 3"x3" 11-gauge steel - maximum stability and durability, holds up to 1,500lbs.
Includes multi-grip pull up bar along with bolts and instructions to bolt rack into the ground or floor.
Includes UHMW-coated J-Hooks and safety straps - 200 dollar value, free.
many additional accessories available for purchase.

Check Stock

Battery Hold Down Bracket, Aluminum Alloy Battery Tie Down Bracket, Battery Tray for Car Battery Mount Bracket Hold Lock Accessories, Car Battery Lock Down- with 10in J bolts (Red)

... 99, 124 and 140R batteries. Please measure the diameter of the original battery before purchasing to avoid purchasing a product that is not the right size..
【Product Size】The total length of the battery tie down bracket is 218 mm (8.58"), the distance between the bolt centres 190 mm (7.48") and the length of the bolt is 250 mm (10"). For bolts that are too long, the hooks can be cut appropriately..
【Battery Hold Down Kit】 Includes 1x battery hold down bracket, 2x10in J-hooks, 2 sets of accessories (for different mounting styles) - 2x hex nuts and wing nuts, 2x rubber protective sleeves, 2x protective rubber washers, 2x spring lock washers, 2x flat washers. Easy to install and provides stable support for the battery..

Check Stock

Tahikem 4 Pcs Kayak Rack Wall Mount, Canoe Hanger Hooks, Kayak Storage Hook, Garage Hanger Ladder Brackets, for Hanging Outdoor Beach Folding Chair Bicycle Surfboard Snowboard Paddle Board - Black

...s or damage, and preventing the canoe(kayak/Ski board/ladders/etc.) from slipping off..
【 EASY TO INSTALL 】This Tahikem kayak hangers can be installed on plaster, wooden, brick and concrete walls. Only 3 steps to complete the installation: 1) Drill 2 holes in the wall. 2) Use a hammer to knock the yellow plastic bolts into the hole. 3) Use an electric drill to fix the screws and kayak hangers into the plastic bolts..
【100% Satisfaction】 30 Days Satisfaction Guarantee. If you have any question about the canoe hanger hooks, please contact us. We will reply within 24 hours..

Check Stock

Battery Hold Down Bracket Holder, Car Battery Holder Kit with 10in J bolts,Aluminum Alloy Battery Tie Down Mount Bracket, Battery Tray for Car Battery Mount Bracket Hold Lock Accessories (Silver)

... to different installation types) - 2 hexagon nuts and wing nuts, 2 rubber protective sleeves, 2 protective rubber washers, 2 spring lock washers and 2 flat washers..
[Size] The total length of the battery fastening bracket is 218 mm (8.58 "), the distance between the bolt centers is 190 mm (7.48"), and the bolt length is 250 mm (10 "). Please measure the diameter of the primary battery before purchasing to avoid purchasing products with incorrect size..
[High Quality] The car battery holder is made of high-quality aluminum alloy, which is firm, rust-free and non-oxidizing. The thickened aluminum design on the side enhances the corrosion resistance and durability of the product. The surface of the bracket is anodized to obtain a lasting finish..
[Function] Replace the old battery kit to provide stable support for the battery and more effectively protect the battery..
[Applicable] This battery tie down applicable to most groups 21, 21R, 22F, 22HF, 22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 13A, 30, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 4....

Check Stock

J-B Weld High Heat Epoxy Syringe, Dark Grey

J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 250°F..
CURE AND SET TIME: At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 250°F..
PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant..
SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.

Check Stock

OBPFY 4 Set 12mm & 14mm Diameter Banjo Hose Barb Bolt Fittings,Metric Thread Banjo Bolt Brake Fitting Adapter with Copper Washers for Motorcycle Car

【Excellent Fittings】* 2 In 1 Set，12mm & 14mm Banjo Barb Bolt Fittings,Designed for excellent engine system fittings.Each component is precision-machined to exact tolerances for trouble-free performance. Long lasting durability,easy installation..
【Application】* Works for Banjo Bolt Inter Diameter 12mm / 14mm. Suitable for Brake System， Air and Fuel Delivery ，Engine..
【14mm Banjo Fittings & Bolt】* Banjo Internal Diameter: 14mm / 0.55".
【12mm Banjo Fittings & Bolt】* Banjo Internal Diameter : 12mm / 0.47".
【Package】* 2 Sets 12mm Banjo Hose Barb Bolt Fittings + 2 Sets 14mm Banjo Hose Barb Bolt Fittings(with 4 X M14 copper spacer + 4 X M12 copper spacer).

Check Stock