ReviewsJ bolt U bolt

Universal Roof Box U-Bolt Clamps Cargo Carrier Roof Rack Bracket Kit Van Mounting Fitting Kit 85mm Internal Width 40mm Thick Luggage Rack Adjustable U Bolt Quick Release Latch for Roof Box Hardware

  • UNIVERSAL FIT - Universal roof box u-bolt clamps fit for car crossbars within 80mm, can accommodate luggage racks up to 40mm/1.57 inches thick, widely used in hatchbacks, sedans, SUVs, off-road vehicles, etc. NOTICE: Not fit for THULE Roof Box.
  • SIZE: Inner width 83mm/3.27 inches, outer width 90mm/3.54 inches, screw diameter 7mm/0.27 inches, 40mm/1.57 inches thick.
  • NOT EASILY DEFORMED - Roof rack mount u-bolt clamps has a rubber gasket and a plastic back plate, which can protect your car from scratches to the greatest extent, and can increase friction, which has a high hardness, good confinement effect, strong bearing capacity.
  • GALVANIZED STEEL MATERIAL - Universal roof box u-bolt clamps using galvanized steel material, durable, alkali resistance, and has a clear thread, uniform force and not easy to slip to improve overall stability.
  • PACKAGE INCLUDED - Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2pcs strap.
Check Stock

Kolpin Stronghold Autolatch

  • Auto-latching design provides quick secure attachment of any Kolpin Stronghold products.
  • Engineered steel bracket for precision angling and attachment to vehicles.
  • Spring loaded latch with stainless steel spring.
  • Durable glass-reinforced nylon auto-latch construction.
  • Includes u-bolts and universal mounting hardware. Included Mounting Hardware: (8) Nylon Lock Nuts, M6-1.0, (8) Flat Washer, M6, (4) U-Bolt, M6-1.0 x 25mm ID x 45mm, (4) Flange Hex Bolt, M6-1.0 x 35mm LG, (1) Mounting Bracket.
Check Stock

Trailer Slipper Spring Suspension and Tandem Axle Hanger Kit for 3 Tubes - 7000 Pound Axles

  • (4) 5 Leaf Slipper Spring for 7000 lb Axles.
  • (4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
  • (8) 3-1/2" long x 9/16" diameter shackle bolts.
  • (2) 4-11/16" long x 7/8" diameter equalizer bolts.
  • This supsension and hanger kit is for a 7k tandem axle setup (14K total capacity).
Check Stock

LIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

  • 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
  • It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
  • Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
  • 2 x tie plates for 1-3/4" or 2" leaf springs.
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

Snow Joe Ultra SJ618E Electric Snow Thrower Hardware Pack

Check Stock

John Deere 44 inch Snow Blower for 100 Series 700BM (BM27439)

Check Stock

Qualward Hitch Tightener Anti-Rattle Clamp, Heavy Duty Steel Stabilizer for 1.25 and 2 inch Hitches 304 Stainless Steel Towing Hitch Mounts,Anti-Rust Double Coating Protective

  • ... Great ideal for hitches on trucks, suv's, vans, RV's and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or larger hitch)..
  • Upgraded Material: Made from solid steel, it is a pretty good quality tightener with upgraded extra-thick U-bolt and plate. It is designed to reduce noise and keep things locked tight for however far you have to travel even in tough weather conditions. You can expect this to be really tough right out of the gate..
  • Package including: A heavy duty 304 stainless steel U-bolt and thick powder coated plate will never rust, spring lock washers and flat washers help to tightening it in place and secure..
  • Easy Installation: First and foremost, you are going to need the following tools: ¾” socket or wrench, U-bolt, tightener plate, washers, lock rings, and nuts. Then,drop the U-Bolt over the stinger and position the tightener plate onto the U-Bolt. Next, place the nuts and hand tighten the washers. At last, finish with the wrench..
Check Stock

Tnisesm Adjustable Battery Hold Down, with Universal Crossbar 8 Inch 304 Stainless Steel J Hook Bolt Sets

  • Car battery hold down is made constructed with Premium iron crossbar & 304 Stainless steel j bolt sets, sturdy, and available for long service life.Special spray process for enhancing its corrosion and rust resistance..
  • Universal adjustable crossbar, from 13.5cm/5.35" to 20cm/7.85" wide, with 8inch J-Bolt..
  • The surface is anodized for a matte and durable finish. Easy to install and uninstall, provides steady holding for the battery. Please confirm size specifications for fitment before purchasing..
  • Simple design,easy installation, replace your old battery holder directly..A perfect modification accessory for racing, sports car, RV,boats,etc..
  • Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check Stock

DC66-00777A Washer Pulsator Cap Replacement Part by Blue Stars - Exact Fit for Samsung Washers - Replaces 3282678 5788799 AP5788799

  • ✅ MODEL NUMBER: DC66-00777A Washer Pulsator Cap..
  • ✅ EASY TO INSTALL: It is made exactly fit for the most top name brand (Samsung) and replaces part numbers: 3282678, 5788799, AP5788799, PS8753312..
  • ✅ FIT MODELS: WA45H7000AP, WA45H7000AW, WA45H7200AP, WA45H7200AW, WA48H7400AP, WA48H7400AW, WA48J7700AW, WA48J7770AP, WA48J7770AW, WA50F9A6DSW, WA50F9A7DSP, WA50F9A7DSW, WA50F9A8DSP, WA50F9A8DSW, WA52J8060AW, WA52J8700AP, WA52J8700AW, WA52J8705MP, WA52J8705MP/A20000, WA52J8705MP/A2 0000, WA52J8707MP, WA52J8707MP/A20000, WA52J8707MP/A2 0000..
  • ✅ PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. It fits over the wash plate mounting bolt to protect the bolt and prevent clothing from catching on the washplate. Easy to install, no tools required. Unplug the washer before installing this part. Wear work gloves to protect your hands..
  • ✅ MONEY-BACK GUARANTEE: For any reason, you're not completely satisfied, you can ask for a replacement or full refund, no questions asked..
Check Stock

(4) Stainless Steel Square U-Bolt 1/2\ D x 3 1/16\ W x 4 5/16\ L Boat Trailer Ubolts with Washers and Nuts,Replacement Parts and Accessories for Automobiles Trailer, Ski Boat, or Sailboat Trailer

  • U-bolt Size: 1/2" D x 3-1/16" W x 4-5/16 L, thread length: 2-1/2" inches, suitable for 3" x 3" square beams and shafts, (order Please check the measurement size carefully before).
  • Tips: It is recommended to use lubricant during installation to prevent wear. Use a hand wrench or socket ratchet when installing the nut. Do not use a high-speed power tool or impact tool to tighten the nut..
  • 304 stainless steel material: U-bolts are made of 304 stainless steel, strong and durable, each bolt can withstand 100LBS.
  • You can get: (4) U-bolts, (8) heavy hex stainless steel nylon lock nuts, (8) flat washers, (8) lock washers. These are only half the price of the hardware store, with these you can spend less time repairing and more time boating.
  • 100 After-sales service: Our U-bolts provide a one-year warranty service. If you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours. Do not worry..
Check Stock

LIBRA 3500lb Tandem Trailer Axle Suspension Kit Leaf Springs U-Bolt & Hanger Kit

  • 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
  • It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
  • Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock