ReviewsJ18 For Pcb

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

Package Included: 1x plate.There is no screws and copper stand included..
Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
This plate is anodized brush finished.It can only use with plate mounted stabilizers.
If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..

Check Stock

Delay-1 DIY Guitar Pedal Kit With 1590B Aluminum Metal Stomp Box Case Enclosure

1.This Kit is super easy to build and very rewarding.
2.The PCB is designed to fit perfectly inside the pre- drilled 1590B enclosure(included).
3.Our PCB is a double-side welding high-quality and professionally designed and produced PCB board.

Check Stock

GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.This is DIY kit,after you....
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some....
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to....
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering....

Check Stock

Switch Sound Dampeners Sheet Soft Landing Pads Dimple Foam Sponge (87 Layout)

【Product Function】Eliminating cavity sound, increasing sound thickness and reducing keyboard resonance..
【Eliminate Keyboard Noise】Between the installation and the PCB and the steel plate, the steel plate and the PCB are used for clamping, no adhesive is required, and the light position is not affected. It fills the entire keyboard, the soud is thicker , the resonance of the plastic keyboard and the cavity sound are eliminated..
【Switch Sound Dampeners Sheet】This product is a Switch Sound Dampeners sheet, which is placed between the keyboard's circuit board (PCB) and the positioning board. It is a must for keyboard lovers to DIY your keyboard..
【3mm Thickness】Most of the silencer pads are designed based on a standard 1.5mm positioning plate. Due to the processing accuracy of the plate, the space between the PCB and the positioning plate ranges from 3mm to 3.5mm. Regardless of whether the keyboard switch is welded or hot-plugged, the 3mm silencer pad is the best choice..
【Warm Tips】This silencer pad is measured and drawn according to the keyboard entity. It is not produced by the original manufacturer and cannot be guaranteed to be fully fitted. Some of the holes, gaps, and circles may be caused by too many models and brands of the sam....

Check Stock

VEVOR Preheating Oven T8280 1600W Infrared Preheating Station Hot Plate PCB Preheater 280x270MM

Preheating Station Work Bench Size :410x316mm.
Complete Preheating Oven Machine Power :1600W.
PCB Preheater Heating plate temperature can be adjusted: 0-450 degree.
Preheating Oven T-8280 Can Achieve To Heat PCB Board And Component Which Contains Lead Or Not，Especially For The BGA And SMD Parts.
Preheating Station Use Infrared Heat, Easy To Cut Through, Heat Proportion, Don’T Have Sirocco Flow. Don’T Shift The Small Components On The PCB Board，Ensure The Welding Quality.

Check Stock

RunJRX Eva Keyboard PCB Foam 108 Layout,Poron Switch Pads 120Pcs and Keyboard Sound Dampeners for Custom Keyboard (RJ-146)

【EVA MATERIAL】High density, micro-fine and homogeneous cell structure with excellent resistance to compression deformation. Widely used for sealing and vibration damping of components in communications, computers and household appliances..
【SWITCH PADS】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds, keep the typing feel consistent.We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
【KEYBOARD PCB FOAM】Modular design fits 108 Layout, no need to cut, easy to install. It is a new project to update the keyboard by filling the gap between the pcb and the positioning board, reducing vibrations and typing sounds..
【USEFUL TOOLS】We prepar a plastic prying bar to help you dismantling your keyboard.Tweezers to help you put the switch pads..
【PACKAGE INCLUDES】EVA Keyboard Pcb Foam 108 Layout x 1, Poron Switch Pads x 120, Plastic Prying Bar x 1, Tweezers x 1..

Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 10 Pcs Print Circuit Board Drill Bits, 0.1mm to 1.4mm Drill Bits Carbide Drill Bits Tool Set(0.1mm)

Cutting Edge Diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.7mm, 1.2mm, 1.3mm, 1.4mm(Optional).
Drills bits are perfect for delicate drilling through hard materials for model engineering, jewelry repairs, craft work, suitable for PCB, SMT, CNC, mold, sculpture, plastic, copper, stainless steel..
Drill bit has a large scraps discharge space,reduce cutting force and broken drill,little resistance and smoothly during the scraps discharge,improve the quality of hole wall..
PCB drill bits are easy to change out and do a great job cutting through the PCB for solder holes.Come in a great storage container that is easy to grab the drill bit you need when you need it..
These bits are made of high quality materials,work fantastic on PCB boards. Sharp and twisted flute will make the drilling be more easy..

Check Stock

Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31

FLEXIBLE USE---Without assembled, the prototype screw terminal block shield board allows you to try variety mount methods, so that you can use it flexibly.
COMPACT STRUCTURE---With compact structure, the prototype screw terminal block shield board is made up of screw terminal block, high quality PCB carrier, FR-4 glass fiber PCB.
RICH COMPONENTS---The prototype screw terminal block shield board includes prototype PCB, terminal blocks, and female header sockets, satisfying your working needs.
LONG SERVICE PERIOD---Made of high quality of material, and with delicate workmanship treatment, the prototype screw terminal block shield board has long serving life, practical and economic.
EXCELLENT AFTER SALE SERVICE---Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.

Check Stock

2900 pcs SMD 1206 0805 0603 Component Assortment Resistor Capacitor Diode Transistor OpAmp IC Solder PCB SMT Soldering Assorted Kit

Huge SMD 1206 0805 0603 Components Assortment, 2800 pcs SMD kit.
1600 pcs Resistor, 520 pcs Capacitor, 180 pcs Transistor, 200 pcs Diodes, 100 pcs Zener, 13 pcs OpAmp, 16 pcs IC, 75 pcs LED.
Everything comes in a compact case and very handy.
13 pcs Trim Pots, PCB adapter, SMD Soldering Tip, 0.4mm Solder, Tweezers, Training PCB.
Includes a training dummy PCB with 70 components, practice your soldering skills.

Check Stock

Skyloong 64 GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.

Check Stock

60 Pieces Pin Vises Hand Drill Bits Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood,Jewelry, Plastic etc

【Package Contant】1 piece pin vise hand drill, 48 pieces of micro twist drill bits (0.5-3.0mm), 10 pieces of PCB mini drill bits (0.3-1.2mm), and 1 piece bench vise..
【Pin Vise】Made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
【48 Pieces Twist Drill Bits 】Include 3 Pieces of 0.5，0.6，0.7，0.8，0.9，1.0mm size, total 18 piece.
2 pieces of 1.1，1.2，1.3，1.4，1.5，1.6，1.7，1.8，1.9，2.0mm size, a total of 20 pieces.
1 piece of 2.1，2.2，2.3，2.4，2.5，2.6，2.7，2.8，2.9，3.0mm size, a total of 10 pieces.
【10 Pieces PCB Drill Bit】PCB mini drills are made of tungsten carbide, the shank diameter is approx. 3.175 mm, overall length is approx. 38 mm, which fit for processing PCB, normal FR-4, CEM-3 boards, SMT, CNC, molds, plastic, circuit board, carbon fiber, composite board and so on.
【Fit dimension】 the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.

Check Stock