ReviewsJack For Rv

Lippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit

ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
RV fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation.
Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.

Check Stock

352338 RV Trailer Stabilizer Jack Motor High Speed Electric 138445 178562 162307 113407 K01285-C800 Koomaha

Electric RV Stabilizer Jack Motor for High Speed Power Models (Stabilizer Jack NOT Included).
OEM Part Number: 352338, 138445, 178562, 162307, 113407, K01285-C800, K01285C800, K01531A800, K01531-A800.
Power stabilizer jack motor make it faster, easier and simpler to get your 5th wheel RV or travel trailer up and running at the campsite camping. These units will save you a lot of time to enjoy your camping..
Specifications: 12V DC, 7 Amps, 53:1 Gear Ratio, 68 RPM, 50 IN/LBS Run Torque.

Check Stock

Dumble RV Stabilizer Jacks Camper Leveling Blocks 2-Pack – Heavy Duty Leveling Blocks for Trailer, Camper, Motorhome

Make sure the height is correct for your use.
Includes 6.2” x 6.2” x 8.75” inch (15.7cm x 15.7cm x 22.2cm) base and 6” x 8.8” inch (15.2cm x 22.3cm) threaded rod.
Rod includes 1.75-inch (4.4cm) diameter slightly dished pad that makes a tight connection under your application.
BUILT TO LAST: Each jack supports up to 6,000 pounds (2,722kg) or 3 Tons (2.7MT).
All components constructed from aluminum for maximum strength and longevity that resists corrosion.
RV levelers nest into each other (stack) for storage.
EASY TO USE: The long bolt in the center of the jack stand is threaded.
At the top of the jack stand is a large nut that fits into a pocket to keep it from turning.
The center bolt raises and lowers by turning the long bolt with the T-handle, either clockwise or counter-clockwise.
Place under a section of sub frame close to the corners.
We recommend using wood or concrete blocks under jacks.
PACKAGE CONTENTS: Package includes (2) RV leveling jacks to support a total of 12,000 pounds (5,443kg).

Check Stock

Rophor Trailer Jack Block New Version RV Camper Blocks for Travel Trailer 5th Wheels and More Up to 15,000 lbs Use for Any Tongue Jack Post Foot 5th Hydraulic Jack or Scissor Stabilizer

【All-in-One Function】: Supports nearly any tongue jack foot, wheel jacks, 9” round 5th wheels hydraulic jack foot or Scissor Stabilizer and more! ELIMINATES NEARLY ALL MOVEMENT AND SWAY in parked RV's and Trailers (Less Stress on Your Trailer)..
【Measurement】: About 6.3" tall, L:11.2", W:8.9" at base, L:9.8", W:7.5" at top (12" tall when double-stacked), recessed post-hole is 2-1/2" diameter. Top accommodates 9” round 5th wheels jack foot..
【New Upgraded】: Compared with others All-in-one Trailer Jack Block, we have upgraded the internal structure and the load-bearing capacity has been increased by 50%, extremely strong and durable. This is a very important security guarantee!.
【Heavy Duty Construction】: Rophor RV trailer jack blocks are built with a high-performance polymer for years of rugged use. Resists dirt, grime and oil. Rated at 15,000 lbs per block..
【Why Choose Us】: Rophor specializes in the production of various RV accessories. 100% of the products have been rigorously tested to ensure that each product received by our user can work perfectly. Won’t sacrifice the quality for the price, we provide 5 years of worry-free maintenance, and look forward to your letter..

Check Stock

BEETRO 4000 lbs Electric Trailer Jack Power Tongue Jack for Travel Trailer Camper RV 22 Lift 12V DC Black

MAX. CAPACITY: BEETRO power tongue jack features 4000 lbs lifting capacity, and 22 '' lifting range (14'' full stroke plus 8'' 5-step adjustable drop leg). Equipped with a 50 inch power cord, can be attached to 12V DC battery positive. Outer tube dia.: 2-1/4", inner tube dia.: 2" ..
SIMPLE OPERATION: Just push the button of the jack will raise or lower automatically, save your time and energy. There are six mounting holes, fit any A-frame trailer, RV, 5th wheels,boat and camper..
HIGH QUALITY: The electric RV jack consists of heavy duty steel pipe, zinc plated inner and drop tubes ,12V DC motor and polypropylene cover. Black powder coating and zinc plated offer stronger rust resistance, extend service life..
SPECIAL DESIGN: Equipped with a LED light, bright enough at night and intricate spaces, convenient for night operation. With a bubble level, easily indicate whether the jack position is level..
SAFETY GUARANTEE: The electric trailer jack has a built-in circuit breaker, if in accident,it will automatically trips and resets. Package includes a manual crank, If the power is off, you can use it manually..

Check Stock

352338 RV Electric Rear Stabilizer Jack Replacement Motor 138445

【Easy to install】A plug-and-play product that directly fits your vehicle. Watching the installation video on YouTube will help a lot..
【Replacement】Replacement motor of rear electric stabilizer..
【Quality】The rv electric rear stabilizer jack motor is manufactured by an ISO-certified manufacturer, and meets or exceeds OEM requirements. 100% factory tested, and durable..
【Warranty】2 years warranty for the rv electric rear stabilizer jack motor! If you have any difficulties and needs, you can contact us at any time..

Check Stock

Camco Eaz-Lift Heavy-Duty Scissor Jacks with Drill Adaptor 24 Inch Supports Up to 7,500 lbs Pack of 2 48830

RV Stabilizer Scissor Jacks: Effortlessly stabilize pop-ups, trailers, and other high vehicles.
these scissor jacks have a certified 7500lb load....
Durable Construction: Made of heavy-duty steel for quality and durability.
scissor jack for RV is powder coated for maximum rust protection.
Adjustable Height: Measures 4-3/8 inches high when fully collapsed and 23-3/4 inches when fully extended.
drill adapter allows bolt-on installation....
Package Includes: Comes with two RV scissor jacks and one scissor jack socket for the power drill.
Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the....

Check Stock

Lippert 285325 24' Scissor Jack

DURABLE CONSTRUCTION — Built tough with a black, powder-coated finish and rust-inhibitive surface that allows it to take on the wear and tear of RV travel.
ECONOMICAL SOLUTION — Inexpensive and extremely reliable, this scissor jack kit is a must-have if you’re replacing an old or broken stabilizer jack.
EXTENSION RANGE — The scissor jack extends up to a maximum of 24” and retracts to 4-1/4” for compact storage when not in use.
SECURE INSTALL — Our scissor jack kits come complete with all mounting hardware needed for bolt-on installation on your 5th wheel, travel trailer or cargo/utility trailer .
DEPENDABLE STRENGTH — This scissor jack is rated to support up to a 5,000 lb. load capacity per jack .

Check Stock

BEETRO 4000 lbs Power Tongue Jack, Heavy Duty Electric Trailer Jack for Travel and Camper, 22" Lift, 12V DC, White

MAX. CAPACITY: BEETRO power tongue jack features 4000 lbs lifting capacity, and 22 '' lifting range (14'' full stroke plus 8'' 5-step adjustable drop leg). Equipped with a 50 inch power cord, can be attached to 12V DC battery positive. Outer tube dia.: 2-1/4", inner tube dia.: 2" ..
SIMPLE OPERATION: Just push the button of the jack will raise or lower automatically, save your time and energy. There are six mounting holes, fit most A-frame trailer, RV, 5th wheels,boat and camper..
HIGH QUALITY: The electric RV jack consists of heavy duty steel pipe, zinc plated inner and drop tubes ,12V DC motor and polypropylene cover. Black powder coating and zinc plated offer stronger rust resistance, extend service life..
SPECIAL DESIGN: Equipped with a LED light, bright enough at night and intricate spaces, convenient for night operation. With a bubble level, easily indicate whether the jack position is level..
SAFETY GUARANTEE: The electric trailer jack has a built-in circuit breaker, if in accident,it will automatically trips and resets. Package includes a manual crank, If the powe....

Check Stock

TYT 24 RV Trailer Stabilizer Leveling Scissor Jacks Trailer stabilizer Jacks with Hand Crank red electroplated Coating on top and Bottom 5000lbs - Set of 2

Advance Jack Capacity: New 24 inch 5000lbs Scissor Jack With Crank Handle, 2 Pack..
Scissor Jack Size: Extended height: 24 inch.
High Materials: Made of a high-quality steel, and the finish is treated with black powder coating, and the top support and bottom base are both....
Easy Installation: Allows either bolt-on or weld-on installation, easy operation. Stabilizing and leveling your rv/trailer, remains steady on soft....
Safe & Reliable: A useful product, the jack can be operated in narrow spaces and help you avoid finger injuries when working.

Check Stock

Seven Sparta Electric Jack Cover, 600D Oxford Fabric Universal RV Electric Tongue Trailer Jack Protective Head Cover (Universal Size 18H x 7 1/2W x 9D)

PROTECT RV ELECTRIC TONGUE JACK: Seven Sparta electric jack cover prevents RV Electric Jack Systems from UV, moisture, dirt and debris, avoiding UV Damage and Environmental Hazards with its help to keep appearance and extend the life of your electric jack.
QUALITY 600D OXFORD FABRIC WITH PU FOR BETTER WATERPROOF: The front side made of PU, which will be better on moisture resistance and protect the buttons of electric Jack. Other three sides is made of 600D oxford fabric with PU for better water resistance and breathability. Besides, oxford fabric has the feature of high tear strength, which can prolong its the service life.
DRAWSTRING AND LARGE SIZE FOR EASILY COVERING AND TAKING DOWN: Each cover is design with drawstring, will let you more easily covering and taking down. And the size is: 18H x 7 1/2W x 9D, thus this cover will fit most electric, no worry for size is inadequate.
METAL RING FOR KEEPING CHAINS OFF THE GROUND: The 2 round pegs in sides is for holding the chains, keeping them far away from ground, and preventing rust.
NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY-BACK GUARANTEE. If youre unsatisfied with this item for any reason, well immediately refund your purchase price.

Check Stock