ReviewsJack Plate For Clamp On Motors

Brocraft Deck Mount Trolling Motor Bracket/Outboard Motor Mount

  • Universal trolling motor bracket for clamp-on type electric trolling motors..
  • Constructed of marine aluminum with black Nylon plastic.
  • Designed for motor to be removed when boat is under engine power or being trailered..
  • For electric trolling motors only. Not for outboard engines of any size..
  • Maximum trolling motor thrust of 36 pounds,Come with a two years limited warranty.
Check Stock

T-H Marine - 3002.1017 52100 CMC PT-35 Tilt and Trim for up to 35 HP

  • 5.5" setback to enhance boat stability and performance.
  • Aluminum construction with stainless steel fasteners.
  • Accommodates clamp-on or bolt-on motors without the need of an adapter.
Check Stock

Kreg KBC3-SYS Bench Clamp System

  • Includes 3" (76mm) Bench Clamp, Clamp Plate, and mounting hardware.
  • Anodized-aluminum plate mounts flush with work surface.
  • Clamp automatically adjusts to match material thickness.
  • clamps materials up to 33/4" thick (95mm).
  • Clamp features an adjustment knob for built-in pressure control.
  • Extra-large padded clamp spreads clamping pressure evenly.
  • Ergonomic padded grips prevent hand fatigue.
  • Compatible with Kreg Clamp Trak and Clamp Vise.
Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

  • The quick release plate is compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. Also could be mounted with camera or camera cage on the top. It is anti-skid designed..
  • There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
  • The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
  • Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
  • Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw....
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
  • Install the base plate on a stable concrete slab under the area you wish to support.
  • Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses ....
Check Stock

SMALLRIG DSLR and Mirrorless Quick Release Clamp and Plate for Arca Standard - 2280

  • Quick Release Clamp and Plate for Arca Standard.
  • The QR clamp and plate is designed for mirrorless and DSLR camera.
  • Attach the QR plate to the camera or camera cage, and then drop it into the receiver.
  • Multiple 1/4’’ and 3/8’’ threaded holes on the bottom for attaching different tripod plate.
Check Stock

Metallor Output Input Jack Plate Socket for Tele SG Style Electric Guitar Parts Replacement Black.

  • Standard recessed rectangle plate which is used mostly on Stratocaster Telecaster style guitar or similar guitars..
  • Rectangle ship, metal material. A superior quality replacement jack socket for guitars..
  • Length 36.4mm, Width 28.4mm, Screw hole distance 27.4mm & 19.4mm , Jack hole diameter: 9.2mm, for specific dimensions, please look at the size diagram..
  • Black color, easy to install, package includes: 1pc output jack plate socket, 4pcs mounting screws..
  • This shiny rectangle style jack plate brings a nice shiny finish to your instrument..
Check Stock

HUANUO Steel Monitor Mount Reinforcement Plate for Thin, Glass and Other Fragile Tabletop, Steel Bracket Plate Fits Most Monitor Stand C Clamp Installation

  • Reinforcement Plate for Monitor Mount - HUANUO monitor mount reinforcement plate provides a better way to install your monitor mount on a desktop through C clamp installation..
  • Protect Your Desks - Reinforcement plate for clamp type monitor arm that reduces distortion of the mounting part, prevent your desks from damage or scratches..
  • Increase Stability to Monitor Mount - This reinforcement plate reduces concentrated desk stress by spreading the weight over a larger surface area. This allows the thin tabletop to be heavier and support a sturdy multi-monitor stand..
  • Make Monitor Mount Fit More Desktops - Besides wood desktop, this reinforcement plate also make your monitor mount fit glass desks..
  • Easy To Use - Just need to align the bracket to the C clamp for quick installation..
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock