ReviewsJaws Merchandise

Yost Vises 904-AS 4 Heavy Duty Steel Bench Vise

  • Bench-mount vise with 4" nominal top jaw width and 1/4"- to 1-1/2"-diameter pipe capacity provides clamping action for light-duty applications.
  • 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.
  • Cast steel body is painted black for mild protection against corrosion and has flat portion that acts as a reinforced anvil and an additional work....
  • Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip.
  • Main screw that controls the jaws is covered by a bar to protect it from damage.
Check Stock

TruFire Edge Buckle Foldback Adjustable Archery Compound Bow Release - Camo Wrist Strap with Foldback Design

  • FOLDBACK BUCKLE LEATHER STRAP - for hands free operation, giving you the ability to secure to wrist with one hand and glass, climb, or rattle with no flopping or clanging.
  • PERFECT FOR EVERY HAND - Length adjustment with locking option and ADJUSTABLE TRIGGER TRAVEL for a custom fit on either right or left hand.
  • RUGGED AND COMPACT – Extremely durable jaws with a dime sized head.
  • EASY TO USE - Open jaws by pulling back the trigger, let off the trigger to close jaws.
  • MADE IN THE USA – Superior, WI to be exact.
  • American Made dual caliper release with spring loaded trigger.
  • Open jaws by pulling back the trigger, letoff the trigger to close jaws.
  • Features our Evolution buckle strap, the simplist yet most comfortable strap on the market.
  • Adjustable length between head and strap by simply turning the head clockwise or counterclockwise. The length adjustment location may be locked in place with a set screw..
Check Stock

TruFire Hardcore Buckle Foldback Adjustable Archery Compound Bow Release - Black Wrist Strap with Foldback Design

  • FOLDBACK BUCKLE LEATHER STRAP - for hands free operation, giving you the ability to secure to wrist with one hand and glass, climb, or rattle with no flopping or clanging.
  • PERFECT FOR EVERY HAND - Length adjustment with locking option and ADJUSTABLE TRIGGER TRAVEL for a custom fit on either right or left hand.
  • RUGGED AND COMPACT – Extremely durable jaws with a dime sized head.
  • EASY TO USE - Open jaws by pulling back the trigger, let off the trigger to close jaws.
  • MADE IN THE USA – Superior, WI to be exact.
  • American Made dual caliper release with spring loaded trigger.
  • Open jaws by pulling back the trigger, letoff the trigger to close jaws.
  • Features our Evolution buckle strap, the simplist yet most comfortable strap on the market.
  • Adjustable length between head and strap by simply turning the head clockwise or counterclockwise. The length adjustment location may be locked in place with a set screw..
Check Stock

Yost Vises 910-AS 10" Heavy Duty Steel Bench Vise

  • Bench-mount vise with 10" nominal top jaw width and 7/8"- to 2-5/8"- diameter pipe capacity provides clamping action for light-duty applications.
  • 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.
  • Cast steel body is painted black for mild protection against corrosion and has flat portion that acts as a reinforced anvil and an additional work surface.
  • Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip.
  • Main screw that controls the jaws is covered by a bar to protect it from damage.
Check Stock

FRICTIONWORKS Made in USA 4' Professional Grade Soft Jaw Pads/ Covers for Bench Vise. N48 Grade Magnets. SH 60 Medium Firm Multi-Use Non-Scratch Polymer

  • MADE IN USA - The vise jaw redesigned from the ground up and built to a higher standard in the USA. Tight tolerances. Magnets stay in the jaws. Jaws stay on the vise. No slipping, moving, or falling off the vise.
  • HOLDS FIRMLY TO THE VISE: 8 N48 spec rare earth magnets - 7 lbs of force each. The only jaws with listed specs and the magnet strength you need to keep the jaws solidly on the vise.
  • UNIQUE MAGNET RETENTION SYSTEM - Magnets secured with stainless nuts and screws to a proprietary internal bracket overmolded into the jaws, solving what is likely the biggest failure point of all bench vise soft jaws.
  • ENHANCED MATERIAL - Our proprietary reinforced polymer composite, shore hardness 60-D, with textured face Is incredibly tough yet softer and grippier than nylon while maintaining more rigidity and toughness than TPU. For high-torque applications see or SH80 jaws..
  • THICKER WALLS – with our custom polyurethane provide more uniform compression than other materials reducing slippage, vise slop and racking.
  • PROTECTIVE SURFACE – Specially textured surface won't mar, scratch or discolor. Tested on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more.
  • TIGHT TOLERANCES - true flat surfaces, angles, and dimensions reduces wobble and improves fi....
Check Stock

Yost Vises 908-HV 8\ High-Visibility Heavy Duty Steel Bench Vise

  • Bench-mount vise with 8" nominal top jaw width and 3/4"- to 2-1/4"-diameter pipe capacity provides clamping action for light-duty applications.
  • 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.
  • Yellow-painted cast steel body is highly visible for safety and has a flat portion that acts as a reinforced anvil and an additional work surface.
  • Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip.
  • Main screw that controls the jaws is covered by a bar to protect it from damage.
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
  • SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....
Check Stock

Yost Vises 910-HV 10" High-Visibility Heavy Duty Steel Bench Vise

  • Bench-mount vise with 10" nominal top jaw width and 7/8"- to 2-5/8"-diameter pipe capacity provides clamping action for light-duty applications.
  • 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.
  • Yellow-painted cast steel body is highly visible for safety and has a flat portion that acts as a reinforced anvil and an additional work surface.
  • Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip.
  • Main screw that controls the jaws is covered by a bar to protect it from damage.
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

Vise Universal Rotate 360° Work Clamp-on Vise Table Vise 3

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for....
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise....
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
Check Stock

TEKTON 10-1/2 Inch Fencing Pliers | PSP10010

  • STAPLE AND NAIL PULLER: The parallel jaws can grip the crown of a staple or the head of a nail and easily pry them out.
  • WIRE SPLICER: Use the top and bottom jaws to isolate two strands of wire for splicing or separating.
  • the bottom jaws are large enough to grip and twist multiple strands of wire.
  • STAPLE STARTER: Use the two jaw openings to hold a staple in place and drive it with a hammer.
  • start a staple with one hand by gripping it in the upper jaws and swinging it into the post.
  • STRIKING FACE: The flat surface is less prone to chipping and deformation than a serrated surface.
  • hit the striking face with a hammer to drive the claw under a staple.
  • STAPLE CLAW: The longer, more pointed claw gives better access for prying out staples.
Check Stock