ReviewsJet Table Saw Fence

Shop Fox W1837 10\ 2 hp Open-Stand Hybrid Table Saw

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. Poly v-ribbed belts reduce vibration and help ensure a great cut. Table flatness is measured diagonally at 0. 010” maximum gap..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
  • CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw..
  • UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price..
  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
Check Stock

SAWSTOP 10-Inch Contractor Saw, 1.75-HP, 30-Inch Standard Fence Assembly (CNS175-SFA30)

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
  • CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw..
  • UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price..
  • 30-INCH STANDARD FENCE ASSEMBLY: This aluminum fence assembly is engineered for the ideal balance between lightweight utility and accurate lockdown..
Check Stock

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a met....
Check Stock

Rockler Table Saw Small Parts Sled

  • Sled base and fence provide zero-clearance support—just run it through your saw to locate the kerf.
  • Sled rides in miter track of your table saw—included miter slot stop limits forward travel of sled.
  • Rear-mounted blade guard is adjustable to fit most table saws.
  • Aluminum T-track on top edge of fence lets you add a flip stop (not included) for repeatable cuts.
  • Short T-track parallel to blade accepts an optional T-track hold-down clamp (sold separately).
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

TUFFIOM 10inch Table Saw w/Port for Connecting Dust Collector, Portable Benchtop Table Saw w/ 60T Blade, Stand & Push Stick, 5000RPM, Adjustable Blade Height, 90°Cross Cut & 0-45°Bevel Cut

  • ADJUSTABLE BLADE ANGLE & HEIGHT: With hand wheel for blade height adjustment, the blade height of the table saw can be adjusted to meet your specific needs. What’s more, the blade angle can also be adjusted to provide 90°cross cutting and 0-45°bevel cutting. And it features 60T blade which can yield a smoother cut..
  • PORT FOR DUST COLLECTOR: The 10inch table saw is designed with port for connecting dust collector at the back (Note: It does not come with dust collector), which can help create a cleaner working environment. And it is also designed with storage part at the left and right sides for storing wrenches and push stick when they are not in use..
  • POWERFUL PERFORMANCE: The no load speed of the table saw is 5000RPM, which allows it to cut most wood with ease. And triangle supports at the back of the metal stand improves the stability of the table saw. Besides, extensions on both sides of the table top also allows it to handle a larger piece of wood more stably than those without extensions..
  • RIP FENCE & ANGLE STOP FOR PRECISE CUTTING: Designed with self-aligning rip fence with parallel guide, the portable table saw can deliver a more precise cutting. And its angle stop can help you to adjust the wood to the appropriate cutting angle..
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process..
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavi....
Check Stock

MICROJIG SP-0100TK MJ SPLITTER - Table Saw Thin Kerf Splitter

  • Popular aftermarket table saw splitter for preventing kickback on table saws (for Thin Kerf Saw Blades Only).
  • Voted Best Tool by Popular Woodworking (2004) for Table Saw Safety!.
  • Installs directly to wood or plastic Zero Clearance Inserts (Throatplates).
  • Mini-featherboard technology keeps the workpiece against the fence and prevents burning.
  • Simple instructions and installation drill guide included.
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Shop Fox W1888 10\ Hybrid Table Saw With Riving Knife, White

  • The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw..
  • Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
  • Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
  • The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
  • For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
  • The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..
Check Stock

Magswitch 81101302 Vertical Featherboard Pro Table Saw Safety Attachment

  • PROFESSIONAL WOODWORKING EQUIPMENT: Vertical featherboard universally improves cutting results by holding down materials to ensure productivity on a table saw or bandsaw..
  • REVERSIBLE MAGNET TOOL: Reversible magnet for functionality on either side of the workpiece..
  • EXCELLENT GRIP: Vertical Featherboard anchors to table saws for fences to provide downward pressure as it is cut to ensure that thin material does not bend or lift off the table.
  • compressible gaskets provide excellent grip when magnets are engaged..
  • CLAMP CONFIGURATION: Configured to clamp to the center of a steel table saw fence or at any point on the steel tabletop..
Check Stock