ReviewsJf 800 Bimetal Bearing

Reotemp K82P-3 Large Dial Easy Read Pocket Thermometer, 0/220 Fahrenheit, 2\ Dial, 5\ Stem, Waterproof

  • Reliable and Rugged - For a variety of uses: A/C testing, dark room, food inspection, science class, laboratory and thousands of other uses..
  • Quick Response - A combination of responsive bimetal element and thin stem make our pocket thermometer quick to respond..
  • Waterproof and Dustproof - Hermetically sealed dial makes it easy to clean and will not fog up if rinsed off. Comes with a pocket protector for storage..
  • Sensitive Bimetal Element - Accurate to ±3 degrees Fahrenheit, this thermometer has a quality bimetal coil that comes calibrated and ready to go..
  • 304 Stainless Steel & Glass Construction - Quality construction ensures our pocket thermometer will last long term..
Check Stock

Reotemp K82P-7 Large Dial Easy Read Pocket Thermometer, -10/110 Celsius, 2\ Dial, 5\ Stem, Waterproof

  • Reliable and Rugged - For a variety of uses: A/C testing, dark room, food inspection, science class, laboratory and thousands of other uses..
  • Quick Response - A combination of responsive bimetal element and thin stem make our pocket thermometer quick to respond..
  • Waterproof and Dustproof - Hermetically sealed dial makes it easy to clean and will not fog up if rinsed off. Comes with a pocket protector for storage..
  • Sensitive Bimetal Element - Accurate to ±1.8 degrees Celsius, this thermometer has a quality bimetal coil that comes calibrated and ready to go..
  • 304 Stainless Steel & Glass Construction - Quality construction ensures our pocket thermometer will last long term..
Check Stock

JF009E JF010E RE0F09A RE0F09B CVT Transmission Step Motor For Nissan Altima Maxima Murano 3.5L

  • 【High Quality】The stepper motor is made of high-quality material, and it has stable performance, so that has long service life.
  • 【Replacement OE 】JF009E / RE0F08A / RE0F08B / JF010E / RE0F09A / RE0F09B / / RE0F10A / F1CJA CVT Transmission.
  • 【Easy to install】Direct replace the old or broken one.
  • 【Fitment】 For Nissan Altima Maxima Murano JF010E RE0F09A RE0F09B.
  • 【Package Included】1 x 3.5L CVT Step Stepper Motor.
Check Stock

All Balls Racing 85-1079 Wheel Stud and Nut Kit

  • ...ade 500 2013 - 2015. can-am renegade 570 efi 2016 - 2018. can-am renegade 800 2012 - 2015. can-am renegade 800 xxc 2012 - 2014. can-am renegade 850 2016 - 2017. can-am renegade 850 xxc 2016 - 2017. can-am renegade xmr 570 efi 2017 - 2018..
  • kit contains all of the components required to properly rebuild the swing arm bearing assembly..
  • needle bearing shafts are made with scm415/42 bearing steel that has been hardened and precision ground..
  • all metal bushings are case hardened and plated to prevent wear and corrosion..
  • pom composite washer bearings replace thru needle washers increased service life and super resistance to water and dirt..
Check Stock

ARCTIC F14 Silent - 140 mm Case Fan, Ultra-Quiet, Extra Quiet Motor, Computer, Almost inaudible, Fan Speed: 800 RPM - Black/White

  • GREATER EFFICIENCY - LESS NOISE AT HIGHER AIRFLOW: At low fan speed, the motor noise is key, a motor developed in Germany with a new alloy/lubricant combination reduced friction and noise.
  • INNOVATIVE DESIGN: Design of fan blades improves air flow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
  • TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case.
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
  • TECHNICAL DATA: Fan speed: 800 RPM, Airflow: 46 CFM/78 m³/h (@ 800 RPM), Noise Level: 0.08 Sone (@ 800 RPM), Pin: 3-pin.
Check Stock

ARCTIC F12 Silent - 120 mm Case Fan, Very Quiet Motor, Computer, Almost inaudible, Push- or Pull Configuration, Fan Speed: 800 RPM - Black

  • GREATER EFFICIENCY - LESS NOISE AT HIGHER AIRFLOW: At low fan speed, the motor noise is key, a motor developed in Germany with a new alloy/lubricant combination reduced friction and noise.
  • INNOVATIVE DESIGN: Design of fan blades improves air flow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
  • TWO WAY INSTALLATION: Blow warm air out of the case. Draw cool air into your case.
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
  • TECHNICAL DATA: Fan speed: 800 RPM, Airflow: 37 CFM/62.9 m³/h (@ 800 RPM), Noise Level: 0.08 Sone (@ 800 RPM), Pin: 3-pin.
Check Stock

Karcy Normal Closed Bimetal Temperature Control Switch Thermostat 70 Celsius N.C KSD9700 Pack of 12

  • KSD9700 product is a kind of thermostat which adopt the bimetal head as the temperature sensing element..
  • The bimetal head is in free state and the contacts are closed when the electrical appliance is working in normal condition..
  • When the ambient temperature raises to the preset operating temperature, the contacts close as the plastic head deforms to jump when being heated, then the circuit is cut off to control the temperature . Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature..
  • Widely used in home appliance's motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc.
  • Package Content: pack of 12pcs 70 Celsius temperature control switch.
Check Stock

Lenox QXP Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 120" Length, 1" Width, 0.035" Thick, 5-8 TPI

  • QXP vari-tooth design with high positive rake and deep gullets for high-production cutting.
  • Bimetal for cutting carbon steel, alloy steel, bearing steel, mold steel, tool steel, stainless steel, and aluminum and other nonferrous materials.
  • Good for cuts in solid shapes, cylindrical tubes, and sheets.
  • Vari-raker set for multipurpose cutting applications.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
Check Stock

T57JF Genuine OEM Dell 8910 8920 8930 XPS Tower Special Edition Heatsink (95W CPU) Cooler High Capacity Heat Sink Module (No Fan) H/S Copper Aluminum Plate Fin Captive Screws A222018440 TS687P1-1 2 3

  • Authentic Original Genuine Dell Thermal Control HS.
  • Fits: 95W High Capacity i7 6700 7700 Tower.
  • PNs: T57JF 0T57JF CN-0T57JF A222018440 A1560AADC10.
  • TS687P1-1 TS687P1-2 TS687P1-3 K991T G0x16 KTDJC.
  • 818-26633 210-AIT0 321-BCGI 338-BLFH 338-BJNY.
Check Stock

Lenox - 86690LPB72360 LXP Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 4-6 TPI

  • LXP vari-tooth design with a high positive rake angle and deep gullets for increased material penetration and chip-carrying capacity compared to standard tooth.
  • Bimetal for cutting carbon steel, alloy steel, bearing steel, mold steel, tool steel, stainless steel, and aluminum and other nonferrous materials.
  • Good for cuts in sheets, solid shapes, and cylindrical tubes.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
Check Stock

Replacement Silicone Ear Tips for JAYBIRD Freedom Sprint JF3/JF4 3 Pairs Medium

  • REPLACEMENT SILICONE EAR TIPS FOR JAYBIRD FREEDOM SPRINT (JF3/JF4) 3 pairs (Medium).
Check Stock