ReviewsJic Fittings

High Pressure Oil Pump HPOP Hoses Lines Kit & Crossover Line Fit for Ford 1999-2003 7.3L Compatible with Powerstroke

  • COMPATIBILITY: Fits for Ford 1999, 2000, 2001, 2002 and 2003 compatible with Powerstroke 7.3L engines, also fit all 99-up E-series & Excursion with 7.3 engines..
  • MATERIAL: Forged steel (clear zinc plated) is applied to provide effective abrasive resistance and anti-aging, does not wear and leak over time..
  • FEATURE: Sensitive to high pressure and temperature. 4800 psi working pressure, 23200 psi minimum burst pressure, -50°F to 260+°F temperature rating..
  • FUNCTION: Reduce conflicts with fuel systems, turbos, elec harnesses and etc. Heat shield specs-1100°F Continuous protection, 2000°F Intermittent protection.
  • INSTALLTION: Easy to install. 45 deg ORB-JIC fitting saves you about an 1/2" of installed height vs the factory 90 deg STC fittings..
Check Stock

8AN to 6AN 6 AN Male Y Block Fuel Pump Fitting Adapter Aluminum 8 AN to 2 x 6AN 9/16-18 Male Flare Thread Y Tube Connector Black

  • JIC -8 AN male to AN6 x 6AN 9/16"-18 thread flare Y block adaptor reducing fittings, black anodized finish.
  • One-piece design is compact and lightweight, high flow capacity, Y-Blocks feature A/N Style Male inlets and outlets.
  • Hard anodized coating is compatible with alcohol, exotic fuel-additives, water and oil.
  • This eliminates leaks due to poor solder joints or leaky O-rings due to CNC manufacturing process, 8 AN Male to AN6 *2 Male Coupling Union Adaptor.
  • Made of one-piece lightweight 6061-T6 billet aluminium.
Check Stock

Eaton Aeroquip 2021-4-6S Male Connectory Male 37-Degree JIC Male Pipe Thread JIC 37° and NPT End Types Carbon Steel 1/4 NPT m x 9/16 JIC m End Size 3/8 Tube OD Pack of 10

  • Tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts in hydraulic applications.
  • Male 1/4-18 NPT threads on one end and male 9/16-18 JIC threads on the other for use with 3/8" OD tubes.
  • Zinc-plated steel for strength, durability, and resistance to corrosion.
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings.
Check Stock

Eaton Aeroquip 202702-8-8S Steel Flared Tube Fitting, Adapter, 1/2\ Male JIC x 1/2\ O-Ring Boss Male (Pack of 4)

  • Joint Industry Council (JIC) male adapter for connecting a tube to an O-ring boss female.
  • Male Joint Industry Council (JIC) threads on one end and male O-ring boss threads on the other end for connecting tubes with different ends.
  • Steel for weldability and greater resistance to rust than iron.
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons.
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing.
Check Stock

Eaton Aeroquip 202702-8-6S Steel Flared Tube Fitting, Adapter, 3/8\ Male JIC x 1/2\ O-Ring Boss Male (Pack of 4)

  • Joint Industry Council (JIC) male adapter for connecting a tube to an O-ring boss female.
  • Male Joint Industry Council (JIC) threads on one end and male O-ring boss threads on the other end for connecting tubes with different ends.
  • Steel for weldability and greater resistance to rust than iron.
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons.
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing.
Check Stock

EATON Aeroquip 2240-6-8S Male Bulkhead Connector Male 37 Degree JIC Male Pipe Thread JIC 37° & NPT End Types Carbon Steel 3/4 JIC m x 3/8 NPT m End Size 1/2 Tube OD

  • Bulkhead pipe and tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting pipes to tubes through a container wall in hydraulic applications.
  • Male 3/8-18 NPT threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes.
  • Zinc-plated steel for strength, durability, and resistance to corrosion.
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings.
Check Stock

Brennan 2403-08-08 Steel JIC Flared Tube Fitting, Straight, 1/2\ Tube OD JIC Male

  • Coupler for connecting two pipes in a straight run.
  • Fitting has JIC flared male connectors for connecting to female JIC pipes.
  • Made of steel for greater rust resistance than iron.
  • Operating temperature ranges from -63 to 400 F.
Check Stock

brennan - 183875 183875 2403-06-06 Steel JIC Flared Tube Fitting, Straight, 3/8\ Tube OD JIC Male

  • Coupler for connecting two pipes in a straight run.
  • Fitting has JIC flared male connectors for connecting to female JIC pipes.
  • Made of steel for greater rust resistance than iron.
  • Operating temperature ranges from -63 to 400 F.
Check Stock

Brennan 2603-06-06-06-FG Forged Steel JIC Flared Tube Fitting, Tee, 3/8\ Tube OD JIC Male

  • Tee with three openings for connecting and branching three pipes.
  • Fitting has JIC flared male connectors for connecting to female JIC pipes.
  • Made of forged steel for weldability, rust resistance, and durability.
  • Meets SAE standard 070401 for quality assurance.
Check Stock

6505-08-08 Hydraulic Fitting 1/2\ Female JIC Swivel X 1/2\ Male Pipe Carbon Steel

  • 6505-08-08 HYDRAULIC FITTING 1/2" FEMALE JIC SWIVEL X 1/2" MALE PIPE (Tube O.D. / Hose I.D. Size).
  • THREAD SIZES FOR 6505-08-08 HYDRAULIC FITTING 3/4"-16 FEMALE JIC SWIVEL X 1/2" MALE PIPE.
  • THIS PART NUMBER IS OFTEN REVERSED IN THE INDUSTY. PLEASE VERIFY THE THREAD SIZES BEFORE PURCHASING.
  • TO MEASURE THREAD SIZE, CALIPERS WORK BEST.
Check Stock

Brennan 2603-04-04-04-SS, Stainless Steel JIC Tube Fitting, 04MJ-04MJ-04MJ Tee, 1/4\ Tube OD

  • Tee with three openings for connecting and branching three pipes.
  • Fitting has JIC flared male connectors for connecting to female JIC pipes.
  • Made of stainless steel for resistance to scaling and corrosion.
  • Operating temperature ranges from -425 to 1200 degrees F.
Check Stock