ReviewsJoby Dslr Tripod

SmallRig 68 Camera Tripod Foldable Aluminum Tripod & Monopod Compatible with 1/4 -20 and 3/8 -16 Video Head Payload 33lb Adjustable Height from 19.7 to 67.7 for Camera Phone - 3983

Compatibility: This video tripod for camera is universally compatible with all 1/4"-20 and 3/8" threaded holes video head, after equipped with ball head and quick plate, you can easily use the tripod to support your device such as DSLR, action cameras, mirrorless cameras, cell phones and projectors.【Note】video head and quick release plate are not included, for camera with telephoto zoom lens, you need to buy a tripod mount ring additionally or telephoto lens bracket for better balance..
2-in-1 Tripod & Monopod: The aluminum tripod can be easily turned into a monopod or walking stick, it is a good companion for you to go hiking or traveling. And the central pole can be inverted to allow for low angle shooting and macro photography..
Height Adjustble and Innovation Design：The height of SmallRig T-10 tripod is adjustable, 4-section column legs with 3 quick release flip-locks allows you to adjust the working height from 19.7" to 67.7" in seconds. Different from other ordinary tripods, this tripod has three 1/4" threaded holes added to the bracket, which can meet the needs of external magic arms, mobile phones, monitors, etc..
33lbs Max Load and Easy to Carry: The dslr tripod offers high level of stability using great quality level of magnesium alu....

Check Stock

SmallRig 71 Camera Tripod Foldable Aluminum Tripod & Monopod 360°Ball Head Detachable Payload 33lb Adjustable Height from 16 to 71 for Camera Phone-3935

Wide Compatibility: This camera tripod is universally compatible with cameras and devices with 1/4"-20 and 3/8"-16 threaded holes, such as DSLR cameras, action cameras and mirrorless cameras, etc. It can also be used with cell phones and projectors. 【Note】For cameras with telephoto zoom lens, you need to purchase additional tripod mount ring or telephoto lens mount for better balance..
2 in 1 Tripod &Monopod: You can easily turn the aluminum tripod into a monopod according to your needs, this tripod is a good companion for your hiking or traveling..
Angle Adjustable:The specially designed 36mm metal ball-head can rotate 360 degree allowing you to take photos at any angle with horizontally and vertically. And the central pole can be inverted to allow for low angle shooting and macro photography..
Height Adjustable: 4-section column legs with 3 quick release flip-locks allows you to adjust the working height from 16" to 71" in seconds. 16.6" folden size is easily took to anywhere for outdoor photography..
Load Bearing and Innovative Design: The dslr tripod offers high level of stability using great quality level of magnesium aluminum alloy. It can withstand up to 33 lbs (15 kg). Different from other tripods, this tripod has Three 1/4" threaded....

Check Stock

Moman Travel Camera Tripod with 360° Panorama Ball Head, 13.8-61.4 Inches Foldable Height,33.7 lbs Max Payload, Aluminum Alloy Tube for All DSLR & SLR Camera Camcorder

【Lightweight and Heavy Duty】The Moman Monopod Tripod uses the new Aluminum alloy to ensure lightness and stability of foot tube and avoid coke or hand shaking, which is the most intimate companion for you and your camera..
【Unique Axis Inversion Design】Enjoying a unique axis inversion design, the Moman monopod tripod not only provides various shooting angles but also serves as a perfect helper for macro shooting. Flexible change from Tripod to Monopod, which also fits as an alpenstock..
【Remarkable Folding Design】This remarkable folding design of the portable tripod for DSLR is only 13.78in long while the width is just 3.15 in. Both fast and stable spiral locking leg system and tube segment adjustment system makes it convenient to fold the Tripod..
【Human-friendly】Installing anti-slip quick loading plate as well as anti-slip and warm sponge handheld grip on the monopod tripod, we value user experience in the first place. During bad weather like heavy wind, adding some heavy objects to the hook enables the stability of the moman tripod..
【Panoramic Ball Head】With this 360° Rotating Aluminum Alloy Panoramic Base, you are able to set your DSLR camera at different angles easily and get the best shooting view..

Check Stock

Peak Design Clutch Camera Handstrap CL-3

WORKS WITH ANY DSLR Compatible with any DSLR (or SLR) camera, including large full-frame bodies and cameras with battery grips..
TRIPOD COMPATIBLE Compatible with most ARCA-type tripod heads. New CL-3 version is provided with our Lower Profile ARCA Compatible Release Plate..
QUICK-ADJUSTING Cinch down on your hand for total security, or pull to loosen when accessing camera controls..
QUICK-CONNECTING Attaches quickly with our Anchor Link connection system. USE WITH CAPTURE Works stand-alone or with the Capture Camera Clip..
SMALL AND SLEEK Low-profile and unobtrusive compared to other camera hand straps on the market..

Check Stock

Instafoto 66'' DSLR Camera Tripod for Canon Nikon with Remote Shutter, Phone/Tablet Holder, Carry Bag (Max. Load 11 lbs)

ULTRA STABILITY - Based on the concept of stability and portability, INSTAFOTO camera tripod leg built with thick aluminum tube (max. dia. 26mm) and high-density ABS pan head, lightweight but sturdy.
counterweight hook, non-slip rubber feet help increase more stability. Max load: 11 pounds / 5 kg..
360° PANORAMIC SHOOTING - Built-in bubble level and 3-way pan head allows for tilt and swivel motion.
portrait or landscape options. Accurate panoramas can be easily orchestrated. Quick-release plate helps ensure fast transitions between shots..
TALL BUT PORTABLE TRIPOD - INSTAFOTO camera tripod weighs only 3.1 pounds.
collapsed to 18 inches and fully extended up to 66 inches in seconds. Compact, sturdy but lightweight design is ideal for travelers and outdoor explorers with the durable carry bag..
VERSATILE TRIPOD for CAMERA PHONE TABLET - Universal 1/4" screw of quick-release plate compatible with most dslr cameras, video cameras, projector, scope etc. Comes with universal holder and REMOTE SHUTTER, it's also your in-home entertainment stand for phone and tablet..
BUY WITH CONFIDENCE - Free return within 30 days, 2 year warranty, 100% satisfied and quick customer service. Package included: 1 x dslr tripod, 1 x holder for phone/ tablet, 1 x carry bag, 1 x re....

Check Stock

Cayer AF2451 67 inches Professional Video Tripod Kit with SV5 Monopod Feet

【Bundle Kit】This Bundle includes 1 kit of Cayer AF2451 Tripod Kit, and 1 Piece of SV5 Monopod Feet.
【Compact but Durable】: Constructed from Aluminum for durability while minimizing weight, folds to 25.6" and supports up to 13.2 lb, making it suitable for DSLR rigs, compact camcorders, and digital cinema cameras.
【Pan Tilt Head】: With 3/8" easy link connector for accessories, Fluid head pan/tilt locking, pre-set counterbalance with a fixed-length detached pan bar, offers 360° panning and +90° / -70° tilt.
The flat base mount with a standard 3/8'' thread makes the head versatile for most tripod, slider, jib or crane.
【Leveling Center Column】: Attached with a built-in half ball leveling base that tilts 15° in any direction to orient your DSLR camera.
【Used as a Monopod】: Easily converts to a monopod by combining the center column with the detachable tripod leg and the SV5 monopod feet.

Check Stock

Ring Light 10\ with 59\ Extendable Tripod Stand & Phone Holder for YouTube Video, Dimmable Led Ring Light for Camera, Video, Makeup, Selfie Photography Compatible with iPhone Android

【Ring Light for DSLR】 AIXPI ring light comes with hot shoe mount which is compatible with dslr, you can mount dslr in the middle of the ring light or on the top of the tripod stand..
【Adjustable Brightness】3 colors lighting mode: white, warm yellow, and warm white. Each lighting mode has 10 adjustable brightness, it can meet your different needs.
【Universal Phone Holder】The phone clip can be extended to 3.93inch(10cm), it is compatible with most smartphones with or without a case. And the phone clip allows you to install your phone horizontally or vertically..
【USB Powered】The USB ports can be used with multiple devices,such as connect USB charger( 10w will be better), mobile power, computer host and laptop. You will be able to enjoy LED ring light at any time freel！.
【Extended Camera Tripod Stand】Extendable from 13.6 inches to 59 inches, just lock it at desired length for your preferred use, you can stand it on the floor or just put onto your table for your convenience.You can also install a camera or smartphone on the top of the tripod stand, it can be used as a camera stand also..

Check Stock

SmallRig Selection 78\ Camera Tripod, Foldable Aluminum Tripod & Monopod, 360°Ball Head Detachable and Quick Release Plate, Payload 33lb, Adjustable Height from 18.5\ to 78\ for Camera, Phone

COMPATIBILITY: This tripod for camera is universally compatible with all cameras and equipment with 1/4"-20 and 3/8"-16 threaded holes, such as DSLR cameras, sports cameras, and mirrorless cameras. It can also be used with mobile phones and projectors.【NOTE】For camera with telephoto zoom lens, you need to buy a tripod mount ring additionally or telephoto lens bracket for better balance..
2-IN-1 TRIPOD & MONOPOD: The aluminum tripod can be easily turned into a monopod or walking stick, it is a good companion for you to go hiking or traveling. And the central pole can be inverted to allow for low angle shooting and macro photography.4-section column legs with 3 quick release flip-locks allows you to adjust the working height from 18.5" to 78.7" in seconds. 19.6" folden size is easily took to anywhere for outdoor photography..
36MM 360°DETACHABLE BALL-HEAD: Compared with other ball head with a diameter of less than 36mm (for example: 28mm, 22mm), 36mm head can provide better stability. The specially designed 36mm metal ball head can rotate 360°allowing you to take photos at any angle with horizontally and vertically.And the ball head of the tripod is detachable, thanks to the double-headed screw design on the top of the tripod, the panoramic tr....

Check Stock

TOAZOE Leather Hand Grip Strap Compatible with Canon , Fujifilm , Nikon , Sony and more DSLR , Mirrorless Cameras

New high quality leather camera hand strap for SLR/DSLR cameras, camorders..
Made from premium man-made leather, secures a firm grip to help prevent accidental dropping of camera or camcorder..
Hand grip provides extra security, comfort and better handling..
One size fits all. Fits camera's and camcorder's 1/4-20 tripod mount. The tripod mount is still available even when installed..
Compatible with Canon Nikon Sony Pentax Minolta Panasonic Olympus Kodak more..DSLR SLR camera (NOTE: camera not included)..

Check Stock

UTEBIT Camera Bike Mount Clamp with 1/4\ Screw and Phone Clip for Bike, Bicycles, Vehicles, Motorcycle 360° Rotation Roll Bar Action Camera Cell Phone Handlebar Holder

【Bike DSLR Mount】360 Rotation, max open size 45mm, it can be installed on rods with the diameter range of 17-35 mm, such as tripod, microphone rods, motorcycles, bicycles and so on..
【Cell Phone Clamp】Adjustable range: 56mm-85mm, avaliable for 4-6.8 inch mobile phone, compatiable for Samsung, compatiable for HTC and other large-screen mobile phone..
【Tripod Mount Adapter】Compatible for Gopro Hero 5,4,3+,3,2,1.
With universal standard 1/4'' thread hole to connected with tripod, selfie and other equipment.
360 degree swivel for safe vertical and horizontal shooting..
【Material】Made of PVS Plastic+ Metal, portable, easy to install.
Anti-slip rubber pad on meshing part and hole shoe connection part of bike mount holder, to increase the friction and reduce scratches..
【Product Includes】1 x Bike DSLR Mount with 1/4'' screw, 1x Cell Phone Tripod Mount with 1/4'' thread hole, 1x Adapter Mount compatible for gopro with 1/4 thread hole. It can be freely matched accoording to your needs..

Check Stock

Vello Speedy Camera Rotating Flash Bracket with TTL Off-Camera Flash Cord for Canon EOS Cameras (1.5') Kit

Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
Dual Cold Shoe Mount- 1x integrated cold shoe mount.
1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.
Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length:8”, Net Weight:3oz. If you have any question with your order,please feel free to contact us..

Check Stock