ReviewsJoint Angle Measurement Device

4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino

  • ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13-bit), measurement at up to ± 16g. Digital output data is 16-bit twos complement format, can be accessed via I2C digital interface or SPI (3-wire or 4-wire)..
  • The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °.
  • Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption..
  • Appliactions: It can used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming..
  • ULTRA LOW POWER: as low as 23 μA in measurement mode and 0.1 μA in standby mode at VS = 2.5 V (typical)..
Check Stock

VOLCANOES CLUB 3 in 1 Digital Angle Finder Protractor - Angle Gauge Spirit Level Ruler with INCH/MM & Level Bubble Vials - Measuring Super Gauge Tool - Decoration, Construction, Woodworking, Machinery

  • 3 IN 1 DIGITAL ANGLE FINDER: Our angle finder is a very convenient woodworking tool in angle (inner and exterior angles) measurement, length (inches and millimeters) measurement and as a spirt level judge whether it is a level or not..
  • HIGH ACCURACY: The equipment has higher resolution of 0.05°and higher accuracy of ±0.1°. It can quickly and accurately calculate the angle. By adding three vials (Horizontal level/ Vertical level/ Circular level), it can be used Like a spirit level and achieve multiple measurements, such as horizontal measurement、vertical measurement as well as universal measurement . (It will not display numbers on the screen, and just help you to judge whether it is a level or not.).
  • FUNCTIONS AND FEATURES: ‘HOLD BUTTON’ can keep the measurement result at any angle, so as to transfer the measurement result to read and record. ‘LOCKING KNOB’ also can fix the angle shape, so as to transfer the angle and draw it on the paper. (The purpose of the locking knob is to adjust the tightness, not to lock the measurement.) ‘AUTOMATIC TURN OFF’ after 5 minutes without any operation or movement to extend the battery life. ‘HANGING HOLE’ is easy to store and carry..
  • MATERIAL: Our angle ruler is made of special hard plastic. Compa....
Check Stock

NEEWER Gimbal Sling Handgrip Compatible with DJI RS 2 RSC 2 RS 3 RS 3 Pro RS 3 Mini Handheld Stabilizer, Adjustable Foldable Handle with Silicon Grip, Max Load 13.2lb/6kg, Ideal for Low Angle Shots

  • 【Multiple Mounting Options】The sling grip comes with multiple 1/4" and 3/8" threaded holes, locating holes compatible with ARRI pins, and two cold shoe adapters to mount a wide range of accessories, including LED lights, sound receiver, monitor, and more.
  • 【Securely Hold Your Device】The grip is mounted on the gimbal with a NATO clamp, load capacity up to 13.2lb/6kg. In addition, it comes with a locking knob to lock tight and a spring stud on the port to prevent accidental loosening and fall of your device.
  • 【Anti Slip Grip】The grip with silicon on the surface features anti slip design and provides a comfortable handheld experience. Its sleek outlook and compact structure make it compatible with DJI RS 2 RSC 2 RS 3 RS 3 Pro Gimbal perfectly.
Check Stock

Upgraded woodworkers Edge Ruler Thickness 1.5mm Approximately 15in .0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler JXHONG

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

Laser Measure, Green Beam Laser Measuring Device with Angle Sensor, 196Ft M/In/Ft Laser Distance Measure Backlit LCD Laser Distance Meter for Pythagorean, Distance, Area and Volume Measuring

  • [BRIGHTEN GREEN BEAM] When using a traditional red beam laser measuring tape, the biggest pain point is that it is not easy to see the emitted laser light during long distance measurement. So we upgraded the red laser beam to a green laser beam. We were surprised to find that the laser brightness of the laser tape measure had increased by three times. Within the range of the laser measuring tool. Even in a bright work environment. You can also see where the laser light is at a glance..
  • [MULTIPLE MEASUREMENT MODES] This is not just a laser distance measuring tool that can measure distance. Area, volume, and Pythagorean measurement are the most basic functions. Due to the introduction of the angle sensor, this laser distance measure tool can perform more diverse measurement modes, for example, you can measure the distance from the window to the ground with one click. Or use this laser measure tool to measure the height of the second floor window without close contact..
  • [PRACTICAL FUNCTION] This laser measure can perform most measurements in 0.5 seconds. The backlit screen can be used at night. The mute function is used in quiet environments such as libraries. Data addition and subtraction calculations and 20 sets of data storage free hands from pen ....
Check Stock

Fluke - Fluke-805 FC 805 FC Vibration Meter

  • Innovative sensor design minimizes measurement variations caused by device angle or contact pressure.
  • Consistent data quality at both low and high frequency ranges.
  • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition.
  • Trending in Microsoft Excel using pre-built templates.
Check Stock

2Pcs JSN-SR04T Integrated Ultrasonic Distance Measuring Sensor Transducer Module Waterproof

  • Working voltage:DC3-5.5V, Static current:5mA, Total current work: 30mA. Working range: 25cm-4M, Working frequency: 40KHZ, Detecting angle: 75 degree. The JSN-SR04T ultrasonic distance measuring module provides a measurement range of 21cm-600cm. Blind area is 20cm..
  • Integrated with sealed waterproof stripline probe, this sensor suitable for wet and harsh measurement occasions. Please note that the device is waterproof, but it couldn't work underwater..
  • Small size, easy to use, strong anti-jamming, high accuracy, low voltage and low power consumption. The module has a variety of modes that can be modified manually, suitable for testing and teaching experiments in different occasions..
  • Applications:It is widely used in horizontal distance ranging, obstacle avoidance, object distance measurement, car reversing sensors, security alarms, automatic control, security and industrial control, Intelligent traffic control and artificial intelligence teaching and research etc..
  • Package Included:2 x JSN-SR04T Ultrasonic Distance Measuring Transducer Sensor Waterproof.
Check Stock

Woodworking Edge Ruler, 0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler, Angle Measuring Ruler,Thickness 1.5mm Approximately .(20in)

  • Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
  • woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
  • The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
  • Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
  • Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..
Check Stock

Weather Station Anemometer Wind Speed Meter Data Logger with Wind Direction Wind Volume Temperature Humidity and PC Software

  • A three-axis magnetic field sensor is installed under wind blade of the instrument to measure wind direction angle. When measuring wind direction,....
  • The wind measurement device is designed with USB for connection with computer and real-time measurement,record up to 960 datas.
  • Measuring the wind speed (unit:m/s,ft/min,Knots,Km/h,Mph), air volume(CFM,CMM), temperature(℃,℉) and humidity(%RH)..
  • Measuring Air volume 2/3 max/ave value and wind speed/air volume max/min/ave value function..
  • Retractable handle,extended to 53cm/20.86 inch..
Check Stock

Car Headrest Mount, Angle Adjustable Headrest Tablet Mount, Universal Tablet Holder for Car Backseat, for 5\ to 12.9\ iPad/Tablet/Smartphone/Nintendo Switch

  • ★【Broad Compatibility】: This car headrest mount works with tablets, cell phones and other devices ranging from 5in to 14in, thus covering a broad spectrum of mobile devices sold in the market today. With the spring loaded method, the holder will grip the device tightly, doesn't budge easily. Intentional holes allow the device could still be charged while being clipped on the car headrest mount..
  • ★【360-Degree Rotation, High Maneuverability】: With a fully customized ball joint and arms that provide 360-degree rotation. You can use your tablet in either portrait or landscape modes. And you can also choose the distance and viewing angle that is most comfortable for everyone..
  • ★【Secure & Stable】: The tablet mount for car has a stabilizing arm to effectively support larger screen devices like the iPad, making it a convenient way to hold most 14in tablets. The speed bumps won’t affect the screen..
  • ★【Rubber Protection】: The tablet headrest mount comes with soft padding to protect your device and car headrest. The post should be 5.11in to 6.88in apart measured from the inside of each post. This iPad holder for car will suit the headrest pole between 0.39 to 0.63in (1 to 1.6cm) in width..
  • ★【Easy Installation, No Tools Needed】: This ....
Check Stock

BENLIUDH 4 Pcs Universal Joint Shaft Coupling 4mm to 6mm Inner Dia U Joint Coupler with Screws for Motor

  • Material：Universal joint shaft coupling is made of nickel-coated iron，much stronger, wearproof, Long service life。.
  • Dimensions：Inner Diameter: 4mm to 6mm，Outer Diameter: 11mm/0.43”；Height: 24mm/0.94”。.
  • Package Include：4 x universal joint shaft coupling, 1x hex wrench, 8 x fastening screws。.
  • Application: The universal joint is suitable for the use of the straight shaft of the motor, and is suitable for the use of various metals such as model cars, model boats, and robots，It is suitable for various general machinery occasions。.
  • It Can be bent at any angle (rotation angle is 45 degrees), and the universal joint can change the transmission direction at any angle。.
Check Stock