ReviewsJoint Loose Flange

M Wrench Fixed Angled Jaw For Places Standard Slip Joint Pliers Wont Reach Or Fit Under Faucet Basin Trap Tool Great for Plumbing Jobs

  • Keyfit Tools M Wrench fixed angled Jaws 3 pivot point slip joint pliers For pipes, oil filter, P Trap,couplings unnder faucet, sink basin flange nuts & many other projects.
  • Angled Jaw is a great alternative for hard to reach jobs where a standard slip joint pliers wont work ~Great Tool for plumbing & plumbers.
  • Directional teeth for maximum bite with less pressure ~Outside jaw teeth for extraction ~Drop down teeth for specialty nuts and flanges.
  • Rust Proof black zinc finish red rubber coated handles.
  • See all our Keyfit Tools ~Keyfit Tools Patented Products.
Check Stock

8629 Wheel Hub Removal Tool Replacement for ATD Tools,Compatible with All Axle Bolt Hubs (5, 6 and 8 Lug Hubs)

  • 1.This tool helps you remove the hub assemblies quickly and safer without damaging the axle..
  • 2.There are enough flange bolts in the package to meet your needs as much as possible..
  • 3.Simple Operation:Find the flange nut that suits you, then fix the 8629 hub removal tool on the hub, and then hit the end of the tool with a hammer until the hub is loose, then you can easily remove the hub.
  • 4.Strong materials and construction increase the service life of the tool..
Check Stock

Idaho Jones Spectra Wide Mouth Connector (2pcs) | Premium Quality Base Connectors for Spectra Breast Pump | Set of 2 Widemouth Connectors 100% Compatible with Spectra S1, Spectra S2, Spectra 9 Plus

  • Customize Your Pumping Experience – Do you love your Spectra pump but its 1-piece silicone flange is either too tight or too large, causing pain or low milk output? Specifically made from the finest hospital-grade material, the advanced Idaho Jones Spectra Connectors help you effortlessly hook the best-fitting breast shields on the market to your favorite Spectra breastmilk pump and turn into a flexible 2-piece flange. Suitable for Spectra S1, S2, 9 Plus and Spectra Synergy Gold breast pumps..
  • Switch Between Spectra and Other Brands like a Pumping Queen – For heavenly expressing comfort, pair each Idaho Jones Spectra Base Connector with a breast shield of your choice. While Maymom base connectors break the bank, our reasonably-priced set of 2 Spectra adapters is a perfect match for a wide range of flanges - Lansinoh Comfort Fit, MayMom MyFit, Pumpin Pals and Lacteck. PLEASE NOTE that you need purchase these parts separately..
  • Outstanding & Easy-to-Clean Spectra Accessory Replacement - Create the comfiest flange/funnel! Seamlessly joining the best pumps with the flanges you prefer is essential against nipple aches, soreness, or tenderness. And it’s muc....
Check Stock

Westbrass D401-1-62 1-1/4" 17 ga. Brass P-Trap with High Box Flange, 1-Pack, Matte Black

  • Approximately 11-1/2 in. from center of neck to end of tailpiece.Maximum working pressure (psi):100.
Check Stock

binifiMux M14-2.0mm Pitch Serrated Hex Flange Lock Nuts 304 Stainless Steel 6 Pieces

  • FUNCTION: These rugged, high-performing nuts provide a secure and solid grip on your stock that won’t come loose or rotate during heavy torque or vibrations..
  • FEATURES: The serrated flange on the nut acts as an integrated washer, effectively spreading out and distributing pressure evenly at the site. The serrated flange, by biting into the stock, maximizes resistance to secure a dependable, vibration-resistant lock that won’t move..
  • POTENT BUILD: Constructed of zinc-plated carbon steel that ensures durability, lasting use and wear resistance. Precision machined for accurate dimensions and clean, sturdy threads..
  • APPLICATION: Great for anytime you need a locked in, non-rotating fastening. Suitable for use in heavy vibration environments, when fastening on uneven mating surfaces, or when the attachment hole is uneven or too large..
Check Stock

ZM Brass P-Trap Pipe Basin Sink Waste Kit with Reducing Washer 1-1/2 22GA

  • Easy installation sink plumbing kit for basin with USA standard size.
  • Top quality 22GA brass stable material for long lasting uses.
  • 1-1/2''or 1-1/4'' inlet, 1-1/2 outlet, Slip joint connection, no special tools needed.
  • Come with necessary nut, Reducing washer, and flange.
  • Chrome plated surface brings better rust-proof and decorative looking for exposed installation.
Check Stock

DERNORD Heating Element U Type Electrical Brewing Water Boiler Heater 1-1/2 Inch NPT Male Flange (208V 3000W)

  • SUS304 Tri-clamp U Type heating element provides 3000w 208v of power.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • With SUS304 Materials Cap,easy to Install.
  • Prevent dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

50 Hex Head Sems Bolts W/Dog Point 1/4'-20 X 7/8'

Check Stock

Astro Pneumatic Tool ADN38 XL Rivet Nut Drill Adapter Kit - 3/8" Capacity

  • ... 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. 211Pcs Black Alloy Steel Electric Rivet Gun Adapter Kit. Made of high quality to ensure the best performance and safety..
  • 2, 【500Pcs Aluminum Blind Rivet 】------ Large Flange Aluminum Blind Rivet, Material: Made of high quality aluminum alloy, never rust, good anti-corrosion property, sturdy, light, durable and long life.Including M3*6:50Pcs.
  • M5*10: 20Pcs;M5*16: 20Pcs.Storage case keeps fasteners clean and organized..
  • 3, 【Electric Rivet Gun Adapter Easy to Use】----- Conversion joint hexagonal screw connected to electric drill, fast turning electric riveting gun, easy installation. The fuselage changes from thin to thick shape, which has little air resistance and is not bulky and effortless to use..
  • 4, 【High Quality 】----- The three-claw clamp with hardening and quenching treatment is more wear-resistant and durable, and the service life of the transfer joint is prolonged..
  • 5, 【What You Get】------ In this kit, You will get 1P....
Check Stock

Dernord 2 Inch (OD64) Tri-clamp Ripple Heating Element Electric Water Heater 5500W 240V

  • Stainless Steel Tri-clover Clamp 2 Inch (OD64), fit 2″(51mm) pipe if that pipe has a 2″ flange for triclamp.
  • With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power.
  • Resists dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers,Stainless Steel Universal Adjustable AXLE CV Joint Boot Crimp Clamp Kit,Hose Axle Plier CV Clamp Tool CV Joint Banding Tools

  • 【High-quality】CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • 【 2 Pcs CV Joint Boot Clamp Pliers 】 The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 【24 Pcs CV Boot Clamp】Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • 【Package Included】:1*CV Clamp Tool,1*CV Joint Boot Clamp Pliers,12*Small CV Boot Clamps,12*Large CV Boot Clamps.
  • 【CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers】 The CV joint boot clamps pilers are newly.AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Plier....
Check Stock