ReviewsJoint Universal

OEMTOOLS 25112 Ball Joint Separator for Cars, Trucks, and SUVs, Ball Joint Removal Tool, Adjustable Ball Joint Puller Extends Up to 2 3/8 Inches

  • For Cars, Trucks, and SUVs: Efficiently separates the ball joint from the spindle support arm on most newer domestic and import front wheel drive vehicles, including trucks and SUVs.
  • Extended Range: In order to fit the variety of vehicles this near universal tool can service, it adjusts up to 2 3/8 inches for various ball joints.
  • Designed With Care: This ball joint splitter tool carries less risk of damaging the boot than a pickle fork joint remover and a hammer.
  • Low Profile: Give yourself plenty of room to work.
  • This ball joint separator is designed to access tight access where most ball joint separators won’t fit.
  • Easy to Use: This ball joint removing tool is designed to be the easiest means to replace top of the line ball joints.
  • Simply twist the removable nut until the joint pops out.
Check Stock

OEMTOOLS 24548 Intermediate U Joint Puller Disassembles Drivelines Removes Seized U-Joint Cups on Intermediate Trucks Buses and Farm Equipment

  • REMOVE ON VARIETY OF MODELS: This Heavy Duty U Joint Puller features a universal fit that easily removes seized U-joint cups on intermediate trucks,....
  • GENTLE ON VEHICLES: This U Joint Press handles the toughest jobs while preventing damage on the driveshaft, yokes, joints, and bearing cups, reducing....
  • EASY AND SAFE TO USE: Use this U Joint Tool to safely disassemble drivelines without hammering or heating components.
  • DURABLE BUILD QUALITY: Built to hold up through heavy duty use.
  • Remove a seized back or front driveshaft U-joint, and keep on going.
  • TRUSTED BY PROFESSIONALS: OEMTOOLS products are trusted by mechanics all over the world to get the job done fast.
Check Stock

U-Joint Shaft 15mm ID Universal Joint Coupling Rotatable Double Section Coupling Joint 15 * 32 * 85mm DIY Steering Joint

  • FIRMLY CROSS SHAFT: The double section Cross shaft coupling is applied to rigid rods whose connecting axes are inclined to each other, usually when the rigid rod with complicated path is not easy to work.
  • THICK UNIVERSAL JOINT: This motor connector consists of a pair of hinges that are close together, these hinges are connected by a horizontal axis, and the other end will also move with the free rotation.
  • SPECIFICATIONS: Material: Metal--Inner Diameter: 15mm / 0.6in--Outer Diameter: 32mm / 1.3in--Length: 85mm / 3.3in--Weight: 344g / 12.1oz (approx.).
  • HIGH HARDNESS COUPLING: Our universal joints are made of high-quality metal, which has high hardness, will not be deformed when transmitting torque, is durable and has a long service life.
  • COMPLETE ACCESSORIES:1 x Universal Joint2 x Screws,Widely used for connecting model cars, model ships, robots, etc.
Check Stock

OEMTOOLS 25202 Ball Joint Separator, 15/16 Inch Pickle Fork Tool, Heavy Duty Steel Tie Rod Removal Tool, Ball Joint Removal Tool, And Joint Splitter

  • Pickle Fork Separator Tool: The tapered fork wedge design of this ball joint separator tool focuses on the fundamentals of machine technology for an easy and uncomplicated process.
  • Precision Performance: Striking the handle with a hammer separates the ball joint cleanly.
  • Designed with a 15/16 inch opening for a firm hold and secure removal.
  • Hardened Steel: The heat treated steel alloy construction of this ball joint separator stands up to tough jobs.
  • Zinc plating resists rust and extends service life.
  • Thoughtful Design: Ball joint separator handle features a nonslip knurled texture.
  • Used as designed, this front end service tool will stand up to years of use.
  • Versatile Uses: This universal ball joint separator can be used for a variety of repairs.
  • For example, the ball joint tool can also be used on CV drive shafts.
Check Stock

LEXIVON Impact Universal Joint - Patented SLIM Design | 3-Piece 1/2', 3/8', and 1/4' Socket Swivel Set | Chrome-Molybdenum Steel Full Impact Grade (LX-113-S)

  • INNOVATIVE DESIGN – New SLIM body allowing you to access narrow & deep spaces, Trendy matte black & rich chrome coat now easy to spot in darker work environments..
  • FLEXIBILITY – Ball spring design enables smooth 360-degree rotation, LEXIVON SLIM impact universal joint set reaches all fasteners, even in tough spots, while the spring-loaded detent ball provides extreme grip preventing the joint socket from dropping..
  • ENDURANCE – Fully impact-grade universal joint sockets made from robust heat-treated Chrome-Molybdenum alloy steel, offering the highest quality for a powerful product enabling use with any high torque impact gun..
  • CONVENIENCE – Your SLIM swivel socket adapters are coated with Manganese Phosphate treatment for maximum corrosion/rust protection & featuring Laser-etched sizes providing a prestigious convenience in recognizing the desired size..
  • RISK-FREE – Meets & Exceeds ANSI (The American National Standard Institute) and backed by our Lifetime Limited Warranty for your complete peace of mind..
Check Stock

Heyiarbeit 3mm to 3mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

  • [MATERIAL] - Universal joint shaft coupling is made of high quality brass, which is strong, wearproof, and durable.
  • [FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
  • [FUNCTION] - Shock mitigation, noise reduction.
  • when the rated torque is exceeded, the coupling can protect the safety of the linkage.
  • [APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.
Check Stock

Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

  • [MATERIAL] - Universal joint shaft coupling is made of high quality iron, and then electroplated, much stronger, wearproof, durable to use.
  • [FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
  • [FUNCTION] - Shock mitigation, noise reduction.
  • when the rated torque is exceeded, the coupling can protect the safety of the linkage.
  • [APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.
Check Stock

TUCAREST 425-356 Upper Steering Shaft Column w/U-Joint Compatible with 2008-2012 Ford Escape / 2008-2011 Mazda Tribute Mercury Mariner Replace # 9L8Z-3B676-A 8L8Z3B676A

  • Intermediate Steering Shaft : Keeps the steering gearbox and steering wheel connected. The universal joint or also called as u-joint at the end of the steering shaft connects to the steering gearbox which has another u-joint that connects to the steering wheel allows for the angles between them to be supported resulting to your vehicle wheels smooth and easy turning..
  • Direct Replacement - Easy Installation:While this is not a genuine OEM part, it is a direct replacement and will fit, work and function like the original part. This replacement intermediate steering shaft is manufactured from high quality steel to ensure longevity providing excellent value..
  • Universal Joint :Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
  • Cost-effective:We are a factory direct sales.Customers can spend a small amount of money and get high quality Brand new Intermediate Steering Shaft..
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly..
Check Stock

BokWin 8mm to 8mm Inner Dia Universal Steering Shaft U Joint Coupler 2Pcs

  • 【Material & Package 】: Nickel-coated iron.
  • 2Pcs 8mm to 8mm universal joint shaft coupling, 4Pcs fastening screws..
  • 【Function】: Can be used in model airplane boat, robot, RC modelmotor etc..
  • 【Widely Used】Universal joint shaft coupling is produced based on International Flange Standard, widely used in model shaft connection.
  • 【Dimensions】: Bore Diameter: 8mm to 8mm (0.31inch to 0.31inch). Thread Size: M4.
  • 【QUALITY AFTER-SALE SERVICE】: If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. FREE REPLACEMENT or REFUND within 90days..
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock