ReviewsJointing Sand

RVGIVE Camper Leveler 2 Pack, RV Leveling Blocks Ramps Kit for Travel Trailer Up to 35,000 lbs, with 2 Levelers, 2 Chocks, 2 Mats, Carrying Bag, Faster & Easier Camper Leveling Than RV Leveling Blocks

【DOUBLE ANTI-SLIP JOINTING SYSTEM】Camper leveler kit designed a special anti-slip jointing system with precise grip channels on the surface of the levelers to prevent levelers from sliding when backing the camper tire onto the levelers. Rubber mats can also increase the ground friction to prevent levelers silding..
【HEAVY-DUTY CONSTRUCTION】RV leveler is built with high-performance polymer for mechanical load-bearing to last a lifetime. Works perfectly on any trailers that weighs up to 35,000 lbs with tires up to 32" diameter, it doesn't eventually break or compress under the weight of the trailer like other levelers made of PP..
【EASY AND FAST LEVELING】Just accurately level the height, without the hassle of setting up your camper with travel trailer leveling blocks or planks under your tires. Simply level your trailer any increment between 1/2" and 4" in less than 5 minutes. Simply drive on it until on the level then chock, done!.
【NO NEED TO TRIM FOR DUAL AXLE TRAILERS】Without any modicication when using with Dual Axle Trailers. Unlike other camper levelers that may needed to be cut to length to fit, make you cut the bottom of the leveler off. You don't need to level both sides of the trailer - only put them on the low side..

DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings..
Ends second-step finishing (jointing and sanding not required)..
Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut)..
Ends cutting 1/16" oversize to allow for RESURFACING.

Ideal for forming strong, reliable, edge-to-edge and miter corner joints.
It creates accurately spaced joints along the length of the workpiece.
Anti-slip pads help prevent movement during the drilling process to ensure fast, reliable jointing.
The motor housing can be easily removed to replace worn carbon brushes.
The dust port allows for connection to an extraction system for a clean, safe working environment.
Included Components 1 x Dowel Jointer, 2 x 5/16 inch drill bits, dust port adapter, hex key and manual.

Specs: Arbor 5/8", Diameter 10", Grind FLAT, Hook Angle 20°, Kerf .126", Plate .087", Teeth 24.
Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance.
Extra Large, Flat Tooth Design leaves a smooth finish without the need for sanding or jointing.
Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish.
Silver Ice Coating resists corrosion and pitch build-up.

Dowel jig with box packing well storage and makes jig accessories tidy.
Dowel jig makes dowel corner, edge or surface joints quickly and accurately..
Self-centering dowel jig with 0-50 mm scale for drilling in alignment..
3 size of hardwood dowel pins with chamfered ends Add strength and endurance.
Doweling Jig kit: 1pc jointing jig and jig accessories including drill bits, wood dowel pins, etc..

Rapid Cutting: 42 four-sided carbide insert cutterhead provides a superior finish..
Quick Changeover: Fence does not need to be removed when switching from jointing and planing functions..
Accuracy and Flatness: Heavy-duty cast iron tables with a ground finish..
Increased Stability: Heavy-duty, one-piece steel closed stand includes mounting tabs..
Improved Finish: Parallelogram design keeps the table close to the cutterhead and allows for precise depth of cut adjustments..

USE: Adjustable frame and guide for cutting square and rectangular recesses, slots, and face panel molds with a router.
Allows a router to cut recesses, slots, face panel moulds etc.
Can also be used to create panel doors for kitchens and more.
FRAME EXTRUSTIONS: Each measures 700 mm or 27-1/2 inches long.
Provides a working area of 600 mm x 600 mm.
METRIC & IMPERIAL: Four lengths of 700mm extrusion with dual metric/imperial measuring scales.
A square is required to ensure frame is square before use.

DIE-CUT BEECHWOOD: These biscuits expand when in contact with a woodworking adhesive such as PVA glue for a solid joining.
COMPATIBLE USE: Ideal for strong, fast, and accurate jointing of hard and soft woods, plywood, and composition board.
DIMENSIONS: No.0 biscuits measure 1-7/8 inch x 5/8 inch x 5/32 inch.
No.10 biscuits measure2-3/32 inch x 3/4 inch x 5/32 inch.
No.20 biscuits measure 2-3/8 inch x 29/32 inch x 5/32 inch.

Machine Screw Thread Length: 22mm / 0.87".
Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..

Base station antenna Factory tuned at mid-band High power handling capability Whip equipped whit waterproof jointing sleeve Made of aluminium alloy....
ype: Dipole Frequency range: 26-28 MHz Radiation (H-plane): Horizontal mounting: Directional Vertical mounting: Omnidirectional Gain: 0 dBd, 2.15 dBi....
SWR @ res. freq.: ≤ 1.1 Max. power: 1000 Watts (CW) continuous 3000 Watts (CW) short time Feed system / position: Gamma match / center Connector:....
Materials: Aluminium, Steel, Nylon Wind load / resistance: 80 N at 150 Km/h / 130 Km/h Wind surface: 0.07 m² Length (approx.): 5420 mm.
Turning radius (approx.): 3050 mm for horizontal polarization Weight (approx.): 2560 gr Mounting mast: Ø 35-50 mm.