ReviewsJoints And Connections

SUMERAIN Pot Filler Faucet Wall Mount,Brushed Nickel Finish and Dual Swing Joints Design

  • Pot filler faucet wall mount adds the convenience of water to fill pots while on your stove or cooktop.
  • Dual swing joints with approximately 24" extension.
  • Brushed nickel pot filler with dual handle design for easy operation..
  • Pot fillers wall mount with NPT 1/2" or 1/2" NPSM connecting thread,designed to easily install with standard U.S. plumbing connections for saving....
  • Sumerain Preferred Authorized Online Dealer for Guaranteed Warranty Coverage,all items covered under Sumerain's limited lifetime warranty..
Check Stock

Minneer Q235 Joist Steel Brackets，2” x 4” Concealed Flange Light Joist Hanger for Wood Rail, 3.7” (Pack of 24)

  • Material: Carbon steel Q235B, Surface treatment: powder coating.
  • Size: (5-1/2"+5-1/2")x3" (140+140)x76mm, Thickness: 3mm (11 Gauge).
  • Hole size: φ10mm (Bolt not included), Hole spacing (on center): 60mm (2⅜ inch).
  • Black Steel tie weight: 490g (1 pcs), 2090g (4 pcs).
  • 45 degree angle joints in roofs, pergolas, fences and decks for a variety of connections and splices where extra strength is needed..
Check Stock

Laboy Glass Vacuum Cold Trap 2-Part with 10 mm Serrated Hose 200mm Length Below The 24/40 Joint for Schlenk Line Organic Chemistry Lab Glassware

  • DESIGN----This is a two-piece design vacuum cold trap,the connections on the uppper parts are with serrated hose connection,The center tube with 10mm hose connections for easy connection to a vacuum gas manifold bank tubes which are also with 10mm hose connections.The serration hose connection on the side tube have an O.D.of 13mm at the smallest serration and 16mm at the largest serration. The lower part is a thick wall round bottom tube with standard taper outer joint..
  • USE----It is used to place between the experimental apparatus and the vacuum source to protect the vacuum pump,pump oil,pump pipe from contamination and the potentially damaging effects of the material,protect people who must work on the vacuum lines,prevent vapors from being emitted back into the reaction system.In a schlenk line,the vacuum trap is usually connected to the vacuum bank of the vacuum gas manifold.
  • DIMENSIONS-----This vacuum trap has 24/40 joints to assemble the two parts together, The O.D of the outer body is 30mm,the outer body below the joint is 200mm,the O.D.of the inner and side tube is 10mm..
  • HEAVY WALL ---This lab glassware is heavy-wall designed , made by hand-blowing according to ASTM E438 ,made of high-quality borosilicate glass and annealed at 800 degree Celsiu....
Check Stock

Laboy Glass Graham Condenser Coiled with 24/40 Joints 300mm in Jacket Length Distillation Apparatus Inland Revenue Condenser Lab Glassware with 10 mm Glass Hose Connections

  • The graham-style condenser having the configuration that the jacket tube contains coolant,and condensation takes place inside the inner tube or coil includes Liebig condenser,Allihn condenser,West condenser,Graham condenser. A graham condenser consists of an inner spiral surrounded by an outer jacket tube ,maxmises collected condensate because all the vapors must flow through the entire length of the spiral,thereby having prolonged contact with the coolant..
  • Graham condenser also called Inland Revenue condenser,usually used in the downward distillation or vacuum evaporations , installed vertically to prevent liquid pooling in the tube. It is very similar to the coiled condenser but differentiated by an inverted coolant/vapor configuration..
  • This Graham condenser is designed with 24/40 standard taper joints at top and bottom to fit the distillation flask and other lab jointed glassware apparatus,with 10mm glass hose connections and a jacket length of 300mm.
  • Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • 100% 90 DAY MONEY BACK GUARANTEE simply return for a full refund without any reason.
Check Stock

Deck Mount Pot Filler Faucet Brushed Nickel Finish with Extension Shank and 20\ Dual Swing Joints Spout, SUMERAIN

  • Deck mount pot filler faucet adds the convenience of water to fill pots while on your stove or cooktop..
  • Extension shank for installing max deck thickness 3-1/16"(78mm) on granite.
  • Dual swing joints with approximately 20" extension and Dual handle design for easy operation.
  • 1/2" connecting thread,designed to easily install with standard U.S. plumbing connections for saving man-hour cost during installing.
  • Sumerain Preferred Authorized Online Dealer for Guaranteed Warranty Coverage,all items covered under Sumerain's limited lifetime warranty.
Check Stock

SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

SYKRSS 2.25'Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.25" OD pipe to 2.25" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Exhaust Headers,304 Stainless Steel Polished Finish Performance Exhaust Manifold Compatible for 84-91 GMT C/K 5.0/5.7

  • 【Compatible】Fits for Chevy 283/302/305/307/327/350/400. (Please select a suitable model before purchasing)..
  • 【Make Driving Safer】Most of the enclosures and stainless steel pipe connections are equipped with reinforced pull tabs, which greatly alleviate the bumpy force of the exhaust manifold during driving, increase driving safety, and prolong the service life of the exhaust manifold..
  • 【Quality materials】Exhaust Headers made from high-strength steel, heavy duty tubes and collectors.High-quality welding for superior stability..
  • 【Production Process】All joints TIG welded for great resistance against cracking and wearing.
  • Polished surface for extra resistance against rusting..
  • 【Great Service】All products come with US stock, Fedex or USPS fast shipping.The responsible seller provides you with a 365-day warranty and friendly 24/7 customer service..
Check Stock

SINJEUN 15 Pack 3\ Stainless Steel T-Bolt Hose Clamp, Clamp Range 89mm-97mm, 304 Band Floating Bridge and Nylon Insert Locknut, Fits 3 Inch Hose ID

  • QUALITY & LEAK-PROOF - The stainless steel hose clamps are made from corrosion-resistant stainless steel with rounded band edges that prevent hose materials from cuts. Sturdy welded construction plus floating bridge liner design provides leak-proof connections for seamless joint applications..
  • SUPERIOR DESIGN - The T-bolt style hose clamps are interchangeable with the more common worm style but rely on a nut and bolt for adjustment/tension rather than threads on a screw. This t bolt clamp works much better and won't damage your hoses like a typical hose clamp..
  • HOW TO CHOOSE - Please check your hose OD diameter and make sure it is in the working range of 89mm-97mm(3.5-3.82 inches). Usually, a 3-inch water hose means its' ID size is 3 inches, but the thickness in different standards is much different, it leads the OD is much different accordingly. Please select appropriate T Clamps based on your OD size..
  • WIDELY USED - Our bolt hose clamps work well for firm plastic and rubber hose and tube in air intake systems, cold side charges air hose connections, and various hose, pipe, and ducting joints, air-intake, and coolant systems for high-performance vehicles, construction equipment, truck, and bus engines..
  • BUY WITH CONFIDENCE - We stand by the quality of o....
Check Stock

SharkBite PEX Crimp Ring Removal Tool, 1/2, 3/4 and 1 Inch Copper Crimp Rings, Orange Handles, Plumbing Fittings, 23055

  • SHARKBITE CRIMP RING REMOVAL TOOL: This SharkBite plumbing tool removes copper crimp rings from brass or poly crimp connections for fittings to be reused.
  • has 200 lbs of crimping force and features a 6 inch handle.
  • COMPATIBILITY: This plumbing disconnect tool works with 1/2 inch, 3/4 inch, and 1 inch copper crimp rings.
  • EASY TO USE: This intuitive SharkBite crimp ring removal tool allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

CTA Digital Laptop Arm - CTA Security Laptop Arm with VESA Mounting Base for Delivery Vehicles, Law Enforcement Cars, and Ride Share Drivers – Compatible with Laptops up to 17” (AUT-SAM) – Black

  • Mounts to your vehicle’s seat rail with no drilling required.
  • Two flexible joints on arm rotate, tilt, and lock in place for easy angle adjustment.
  • VESA Compatible with 75x75 and 100x100MM connections.
  • Compatible with laptops that has a length dimension of 17” or less.
Check Stock