ReviewsJst Connector Battery Charger

SoloGood EMAX 6pcs 450mAh 1S LiPo Battery 3.8V HV 85C LiHV Batteries with PH2.0 Compatible for 1S Racing Drone Quadcopter EMAX TinyHawk Micro FPV Drone

JST-PH 2.0 Connector Plug, 3.8V Voltage, 450mAh capacity, Discharge rate:80C, burst discharge rate 160C..
Battery dimensions: L*W*H 59*16*6.6mm / 2.3*0.63*0.26 inch.battery weight 12grams /0.43oz..
3.8V 450mAh Lipo battery Compatible with EMAX EZ Pilot Tinyhawk S Freestyle brushless RC Quadcopter Drone..
3.8V 450mAh 1S 80C rechargeable battery Compatible with EMAX Tinyhawk 2 Mini brushless RC Quadcopter Drone..
Package include:4 pack 3.8V 450mAh 80C Battery , 1 pack 6 in 1 USB Seat charger. Green light is solid when charging, green light off after full charge. Charger current 2 switch:0.2A and 0.6A..

Check Stock

Blomiky 2 Pack 7.4V 1200mAH Lipo Battery Pack with JST Plug and Charger for UDIRC UD1601 UD1602 Pro Fisca Cheewing 1/16 Scale 20MPH 30KM/H RC Truck X6 Battery and USB 2

Discharge plug:Red JST connector, plug end cross-section size:5.55*3.0mm/0.218*0.13inch. 7.4V 1200mAh lipo rechargeable battery fit for Huina 1592....
Battery dimensions:: L66.6*W30*H15.3mm/2.62*1.18*0.6inch . Weight:63G. 7.4V 1200mAh Lipo rechargeable battery fit for Laegendary 1:14 scale 22 Channel....
7.4V 1200mAh JST Lipo rechargeable battery fit for YiZhan X6 RC Quadcopter Drone Aircfaft, 7.4V 1200mAh JST battery replaced for Cheerwing 1:16 2.4Ghz....
7.4V 1200mAh JST lipo battery with JST plug fit for WLtoys V262 V333 V353B V666 Q212,JJRC H40WH H40 H26 H26HW,MJX X101 X102 RC Quadcopter Drone,UDI....
7.4V 2S USB charging cable have IC protection circuit and Indicator light. green light is blink when charged, green light stop blink after full....

Check Stock

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs LCD Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply 01435

One charger for many battery packs - Tenergy TB6-B balance charger/discharger is ideal for all hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
Wide connector compatibility - With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added..
Works with multiple voltages - Compatible with battery packs with voltages that ranges from 6 to 12 for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs with voltages from 3.7 volts to 22.2 volts (1s-6s)..
Multiple functions - More than a regular digital balance charger, Tenergy TB6-B comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more for all of your battery packs..
Easy to read screen - View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Buy with confidence, your charger includes Tenergy a 12-month warranty..

Check Stock

Szwisechip RC Battery Charger for 3.6V-10.8V NiMH/NiCd Battery Packs Hobbies Airsoft Batteries, RC Car, RC Truck, Air Gun,RC Airplanes , Compact with Standard /Mini Tamiya, JST, T Plug, JR FUTABA...

...100mA. Fast charge for NiCd/NiMH battery pack..
HOBBY BATTERY CHARGER- With Delta Peak detection function, at the same time can eliminate the memory effect of the battery. Power all your hobbies with one charger. Such as battery packs for Airsoft, RC Cars, and or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, JST, T plug, JR FUTABA, MCX, MCP X, TX 5.5 X 2.5.
3.6V-9.6V 10.8V NiMH/NiCd Battery Packs Hobbies For Airsoft Batteries.
SZWISECHIP WARRANTY - The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence, this compact battery charger is compliant with the high standard set forth by CE certification and also includes 12-month warranty..

Check Stock

SUPULSE iMAX B6 Balance Charger Discharger 1-6S AC/DC Lipo Battery Charger Lipo Charger RC Charger RC Battery Charger for NiMH/NiCD/Li-Po/Li-Fo Packs LCD Hobby Battery Charger Smart Battery

【LOAD WITH MULTIPLE ADVANCED FUNCTIONS】Compare to a regular digital balance charger, has function about Li-ion and Li-Po balance charging, fast charging, data storage, cyclic charging to meet with different demand, much more for all of your battery packs..
【WIDE BATTERY TYPE COMPATIBILITY】SUPULSE RC battery charger support various kinds of battery packs like Lipo, Li-Fo, NiMH, Nicd, PO4, SLA, solve the charging problem for different hobby battery. Please choose the right type of battery when charging..
【WIDE CONNECTOR COMPATIBILITY】The multi-connectors cable comes with tamiya, XT60, TRX, T plug, FUTABA, EC 3 and JST make the balance charger compatible with battery packs with these connectors. No need to buy other cables separately..
【SUPPORT MULTIPLE WORKING VOLTAGE】Comes with dual power input port, compatible voltage got AC 100-240V and DC 10-20V, allow more flexible power charging supply. Voltage power for charger and discharger is 80W and current at 0.1-6A /0.1-2A..
【HIGH QUALITY SAFETY DESIGN】This balance charger discharger built in an advanced smart chip to provide you accurately control the charging parameters of the charger to avoid over-current, over-discharge, over-voltage, and short-circuit..

Check Stock

Tenergy TB6-B Balance Charger and 5-in-1 Battery Meter for 1S-6S Digital Battery Packs, Charger for NiMH/NiCD/Li-PO/Li-Fe Packs

... Tenergy TB6-B balance charger/discharger and 5-in-1 battery meter bundle offers detailed charging and discharging features for all LiPo/LiFePO4/Li-ion battery packs. Get full detailed battery pack health information with the meter, and full charging/discharging capabilities with the TB6-B balance charger..
Multiple connector harness - Tenergy's AC balance charger can recharge battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added..
Wide voltage compatibility - The smart charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), and 9.6V, 12.8V, 16V. SLA 2V-20V..
Multi-purpose battery meter - Tenergy's 5-in-1 cell meter is a great addition to any habby charging arsenal, the meter estimates voltages for LiPo/LiFePO4/Li-ion (2-7 cells) packs and NiCd / NiMH batteries for TX and RX (4-7 cells). The battery capacity checker requires no additional accessories and is powered by the testing battery pack to quickly evaluate the pack's capacity.
use the battery checker to evaluate the health of your battery pack and decide when to discard or replace old packs..

Check Stock

EBL 1S-6S Lipo Battery Charger Balance Charger Discharger RC Battery Charger for Li-PO/NiMH/NiCD/Li-Fe/LiHV/Li-ion Battery Packs with Deans/Tamiya/JST/EC3/HiTec Connectors Cable Power Supply

...arger support LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. NiMH/NiCD 1.2V-18V (1A-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA (2-20V). Please choose the right type of battery when charging..
Wide Connector Compatibility - The rc car charger comes with an octopus cable, which has Deans(T plug), EC3, JST, Futaba, mini Tamiya, Tamiya connectors. These connectors are matched almost all popular RC batteries connectors. No need to buy other cables separately..
Load with Multiple Advanced Functions - The rc battery charger includes features like LiPO, Li-ion, LiHv, and LiFe balance charging, fast charging, cyclic charging, data storage, discharging, and much more extra function for all of your hobby battery packs..
High Quality & Safe - This lipo battery charger has been strictly processed with better quality, and the charger built in an advanced smart chip can accurately control the charging parameters of the charger to avoid over-current, over-discharge, over-voltage, and short-circuit..
What You Get - 1 x EBL Balance Battery Charger, 1 x Multi-Charging harness, 1 x Clear User Manual, 1 x Power Adapter..

Check Stock

7.4V Lipo Battery 2S 1000mAh: 35C Battery with PH2.0 & JST Plug A xial SCX24 Lithium Batteries 2 Pack Rechargeable Batteries for WL Toys RC Car Most 1/10 1/16 1/18 1/24 Scale Racing Trucks

JST & PH2.0 double plug: This 2s battery is a JST plug and PH2.0 plug 2-in-1 rechargeable battery. Lipo battery with JST plug can be used for WL toys A949 A959 A969 A979 K929, Ex ceed RC cars and other RC vehicles. Lipo battery with PH2.0 plug can be used for A xial SCX24 most 1/10 1/16 1/18 1/24 racing car RC trucks.
Wide application: This battery can fit most 2S JST or PH2.0 plug remote control devices. In addition to fit for RC cars, this battery can not only power drones or RC Boats but also be used in the transmitter of them.
AB clip special design: AB clips in 2S RC battery's XH-3pin charging connector, which can enhance battery durability, protect the battery charging cable and help you plug and unplug the charging cable quickly and easily.
300 cycle life: Compared with other 2s lipo batteries, our battery can increase the service life by 30%, which can reach at least 300 times of high-efficiency, safe and fast charging and discharging efficiency.
Lightweight but powerful: 7.4v mini lipo battery size is 55mm*30mm*14mm and only weighs 45g. Although this is a small RC lithium battery, it can reduce the weight of your drone or RC car and provide huge power support.

Check Stock

4.8V 250mA AC Wall Charger Replacement Spare Part Compatible with Haktoys HAK101 Invincible Tornado Twister RC Acrobatic Stunt Car

Input: AC 110V-240V 50/60Hz, Output: DC 4.8V - 250mA.
Estimated charge time: 2-3 hours Do not over-charge and over-discharge the battery.
Works with Haktoys HAK101 RC Stunt Car and other compatible RC products.

Check Stock

EMAX Tinyhawk 2 New Model Indoor FPV Racing Drone F4 5A 16000KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 1S-2S - BNF

EMAX 0110001096 - Tinyhawk II Indoor FPV Racing Drone BNF, F4, 5A.
Includes: (1) Tinyhawk II BNF (1) EMAX 450mAh 1S HV Battery (1) EMAX 300mAh 2S HV Battery (2) CCW + 2x CW Spare Props (1) 1S-2S USB LiPo Charger (1) Screwdriver + Hardware Kit.
Specs: FRAME: Wheelbase: 75mm Dry Weight: 31.2g All Up Weight: 43.5g with 1x 450mAh 1S battery Frame Material: Polypropylene MOTORS: Stator Size: 0802 Kv: 16000kv Propeller Mount: Push-On Avan TH-style Propeller: Avan Turtlemode 4-Blade ALL-IN-ONE (AIO) FLIGHT CONTROLLER: Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 FPV SYSTEM.
Part number(s) included (in factory packaging): 0110001096.

Check Stock

Spektrum S2100 Smart Charger: 200W (2x100W) AC Dual Output Lipo Battery Charger with Usb | LCD Color Display | IC3 Connector (EC3 Compatible)

Compact AC dual charger with 200W output charges and balance two batteries at once and features USB port for cell phone and Smart device charging.
Reverse polarity, short-circuit, over current, and low input voltage protection – plus internal balancing with JST-XH connector and internal adapter.
Pair with Spektrum Smart batteries to unlock Smart features, access vital battery data, simplify balancing, and enable auto-discharge.
Backwards compatible with EC3 connectors to support traditional RC battery charging as well.
Supported battery types: 1-6S LiFe, LIon, LiPo, and LiHV | 1-6S NiMH and NiCd | 1-12S Pb.

Check Stock