ReviewsJtag Adapter

TX Programmer V2 for Xbox 360 Game Console, NAND for XILINX CR JTAG Programming, for Xbox 360 Mainboard Cable Repair Tools Set for CoolRunners inc, Phat and Slim, etc

  • Fast NAND programming and for XILINX CR JTAG programming, good performance, easy to use..
  • Compatible with all for CoolRunners inc, Phat and Slim, and compatible with all NAND X QSB..
  • Support for complete late monitoring, equipped with LED light for power and data indicator..
  • Easy installation system, including for KIOSK option for remote opening, built in programmer for future firmware upgrades..
  • Designed for J Runner application (Build 283 +), tested by professional team, reliable to use..
Check Stock

krtkl piSmasher snickerdoodle Baseboard – Single-Board Computer with HDMI in/Out, Dual Gigabit Ethernet, Audio Line in/Out/Headset, 4X USB 2.0, 25 I/O, and JTAG

  • snickerdoodle Single-Board-Computer Baseboard.
  • HDMI Type A Input and Output up to WUXGA (1920 x 1200p) at 60Hz and 8-ch., 32-bit/192kHz HDMI Audio.
  • Dual FPGA-Connected Gigabit Ethernet RJ45 Jacks with PHY Support for Time-Sensitive Networking (TSN).
  • Stereo Audio Line Input, Output, and Headset (Mono Mic) via 3.5mm Jack with Dedicated 96kHz CODEC.
  • Four USB 2.0 Hi-Speed Standard-A Host Receptacles, 25 Reconfigurable FPGA I/O Pins, Xilinx JTAG.
Check Stock

J-R Programmer V2 with 3 Cables Set for Microsoft Xbox 360 Video Game Accessories

  • ★Quality - Brand new and high quality, well packed.
  • ★Fitment - Compatible with All NAND-X QSB's Includes KIOSK option for Remote On Built-in Programmer For Future Firmware Upgrades Designed for the latest J-Runner App (Build 283+) Rock Solid Design – Tested by the J-Runner Team Supports New QSB V3 Kits (Solder Separately) Supports Sonus 360 Programming High Quality & Trusted TX Design.
  • ★Specification - Fast NAND Programming Fast XILINX CR JTAG Programming Compatible with all CoolRunners inc the new CR3 Pro Supports Full Post Monitoring Compatible with both Phat and Slim Onboard LED's indicate Power & Data.
  • ★Please Note - This is high a quality AFTERMARKET part . Please check pictures for more details, and check your part number and our fitment before placing an order.
  • ★Package Contents - 1x TX J-R Programmer V2, 1x Cable For QSB V3 Kit, 1x Cable For Xilinx CRJTAG, 1x Cable for Sonus 360.
Check Stock

Antrader 30CM 16-Pin IDC Connector Flat Ribbon Cable with Black 2.54mm FC Dual Row Female to Female Sockets, 6 Pieces

  • Double rows, 8Pin female to 8Pin female header with both end, compatible with 2.54mm spacing pin headers..
  • Total length is 12" (30cm) with 2.54mm Female to Female 16P 2 x 8 sockets..
  • Wire Pitch: 0.05" (1.27 mm) Center Spacing.
  • Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • 6pcs IDC Connector flat Ribbon cable, Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc..
Check Stock

SparkFun RedBoard Artemis ATP Machine Learning Development Board Includes BLE 1 megabyte Flash USB-C Qwiic I2C MEMS Microphone Compatible with Arduino IDE platform Run TenserFlow Models Mega Footprint

  • FCC/IC/CE Certified 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world’s first open-source, US manufactured, BLE module.
  • 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available.
  • Includes 48 GPIO pins - all interrupt capable. 31 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio.
  • Features 10 ADC channels with 14-bit precision, 2 UARTs, 6 I2C buses, 6 SPI buses, PDM Interface.
  • Exposed JTAG connector for more advanced users to use the power and speed of professional tools.
Check Stock

Intel/Altera Cyclone IV FPGA Development Board -- DueProLogic

  • Intel/Altera Cyclone IV FPGA includes 6,000 Logic Elements with two clock multipliers. The Cyclone IV FPGA is the perfect balance of inexpensive cost versus plentiful logic cells, 20KBytes of SRAM, and General Purpose Input/Output pins. This is a great board to learn how to program FPGA's..
  • Built in programmer cable allows configuring the FPGA with a single Micro-B cable. The DPL can be powered from the USB cable or from the Barrel Connector. A separate JTAG header can also be used to program the FPGA using a compatible USB Blaster cable..
  • 6x6 LED Array allows character and animations to be displayed at ultra fast speed. LED blocks can be individually turned on/off to allow LED signals to be used as I/O's.
  • 70 Inputs/Outputs originating at the FPGA are available at Stackable Headers organized around the edge of the board. The user can configure these I/O's using the FPGA project code..
  • The DPL contains two oscillators, 66MHz and 100MHz. The 66MHz oscillator is used to provide clocking for the EPT ActiveHost USB communications core. The 100MHz oscillator can be used by the user clocked up using one of the onboard Clock-DLL modules..
Check Stock

SparkFun RedBoard Artemis Machine Learning Development Board Includes BLE One megabyte of Flash USB-C connector Qwiic I2C MEMS microphone Compatible with Arduino IDE Run TenserFlow models R3 footprint

  • The Artemis module has the FCC/IC/CE Certification 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world’s first open-source, US manufactured, BLE module.
  • 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available.
  • Includes 24 GPIO pins - all interrupt capable. 21 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio.
  • Features 10 ADC channels with 14-bit precision, 2 UARTs, 6 I2C buses, 4 SPI buses, PDM Interface.
  • Exposed JTAG connector for more advanced users to use the power and speed of professional tools.
Check Stock

SparkFun Thing Plus-Artemis Machine Learning Development Board Includes BLE 1MB of Flash USB-C Qwiic I2C MEMS LiPo Charger Compatible with Arduino IDE Platform Run TenserFlow Models Feather Footprint

  • FCC/IC/CE Certification 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world’s first open-source, US manufactured, BLE module.
  • 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available.
  • Includes 21 GPIO pins - all interrupt capable. 21 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio.
  • Features 8 ADC channels with 14-bit precision, 2 I2C buses, 1 SPI bus, PDM Digital Microphone.
  • Exposed JTAG pin holes for more advanced users to use the power and speed of professional tools.
Check Stock

LA2016 USB Logic Analyzer Full 16 channels 200MHz sampling rate with the English PC software handheld instrument, Support Windows (32bit/64bit),Mac OS,Linux

  • LA2016 is a high-performance logic analyzer with 16 full channels and 200MHz sampling rate..
  • It is composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc..
  • LA2016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved..
  • Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc....
  • Supported OS: MAC OS,Linux,Windows XP, Vista, Windows 7/8/10(32/64bit).
Check Stock

Gxcdizx Programmer Cable Kit for xbox360 nand-x usb pro v2 cable J R programmer v2 cable for xbox 360 CPU Postfix Adapter Corona V1 V2

  • ➽Specification - Fast NAND Programming Fast XILINX CR JTAG Programming Compatible with all CoolRunners inc the new CR3 Pro Supports Full Post Monitoring Compatible with both Phat and Slim Onboard LED's indicate Power & Data..
  • ➽Fitment - Compatible for All NAND-X QSB's Includes KIOSK option for Remote On Built-in Programmer For Future Firmware Upgrades Designed for the latest J-Runner App (Build 283+) Rock Solid Design ..
  • ➽Please Note - This is high a quality AFTERMARKET part . Please check pictures for more details, and check your part number and our fitment before placing an order..
  • ➽Package Contents - 1x TX J-R Programmer V2, 1x Cable For QSB V3 Kit, 1x Cable For Xilinx CRJTAG, 1x Cable for Sonus 360..
  • ➽Please contact us if you received the part damaged or if the part you ordered did not fix your problem.We would like to ensure 100% customer satisfaction for you..
Check Stock

InnoMaker LA5016 USB Logic Analyzer 16Channels 500M Max Sample Rate 10GB Samples MCU/ARM/FPGA Debug Tool English Software Support Windows (32bit/64bit),Mac OS,Linux

  • LA5016 is a high-performance logic analyzer with 16 channels and 500M max sampling rate..
  • Composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc..
  • LA5016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved..
  • Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc….
  • Support OS: Support Windows (32bit/64bit),Mac OS,Linux.
Check Stock