ReviewsJuki 750 Z axis Motor

LulzBot KT-PR0051NA TAZ Workhorse 3D Printer

  • Belt driven Z-axis for fast cycle times and elimination of Z wobble..
  • X/Y/Z Backlash Compensation* for 3D printed part accuracy..
  • Lightweight tool head design for faster, better looking prints.
  • Pre-configured material profiles created by expert in-house technicians..
  • Dual Z-axis limit switches for automatic x-axis gantry leveling.
  • The industry’s widest array of supported materials with ready-to-print profiles.
Check Stock

FeiyuTech SCORP-C Camera Stabilizer Gimbal for DSLR and Mirrorless Camera, Camera Handheld Gimbal 3-Axis, 5.5lbs Payload, for Sony α7Ⅳ A6300/A6400 A7S3 a9/a7 for Canon 5D3/80D for Nikon D7500/Z5/Z6 II

  • smooth rounded ergonomics to perfectly fit your hand Set it down anywhere：No tripod required, the gimbal is complete with an integral folding aileron bracket.
  • 【CONSIDERATE DESIGN】Easier installation and leveling 1:Three-axis motor lock,without unwanted movement 2:Five-way center of gravity adjustment 3:Center of gravity memory slider 4: Arca Quick Release Plate.
  • 【POWERFUL KEY, EASILY SWITCH & 2500mah Efficient Battery】Switch to the new professional mode to unlock even more features. 10-13 Hour maximum runtime with fast charging support 18W fast charging enables an extra 30 minutes runtime in just 5 minutes.
  • 【COMPLEXSHOTS,EASILY ACHIEVED】 1:AB Trajectory Memory :Memorize trajectory position, one key to achieve the set movement. 2:Flash Mode :Three-Axis fast follow, easily capture any movement. 3:Panoramic Photography,Time-lapse Photography,Space Mode (Three-Axis Follow),Vertical-shooting Mode.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225 x 225 x 280 mm³ Large Printing Size

  • 【Overview of Neptune 3 Pro】225*225*280mm³ market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
  • 【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
  • 【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of th....
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

Arduino Uno Nano 4 Axis Stepper Control CNC Mill G-Code Translator A4988 Compatible Easy to Use and Friendly Software

  • Runs on almost any PC which has : WIN 10, 8, 7, XP, Millenium, NT 2K, 98. Low PC CPU loading, that do not hang or overload your PC, so you can use....
  • Load your g-code and start machining. Easy straight forward operation. Quick configuration for many cnc type. Simple configuration for custom cnc..
  • When powering down record position of cnc x,y,z,w.
  • so it does not loose cnc machine position at start up. Integrated firmware to easily program....
  • Hints to help and guide during operation plus tutorial videos all embedded in the software. Up to 16 khz operation for precise stepper motor motion..
  • Jogging on all 4 axis x, y, z, w. 4th axis (w) can be geared to x or y (via g-code) to create surface of revolution. Emergency shutdown for safe....
Check Stock

CNCTOPBAOS Upgrade CNC 3018 Pro 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine

  • Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle..
  • ♞【Main Feature】 Working area:30x18x4.5cm.
  • Type: USB Port Desktop cnc router/Spindle: 775 spindle motor (12-36V) 24V:10000rpm/ Stepper Motor: Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items..
  • ♞【GRBL Software】Our parcel include 4G USB flash drive,pls download the installation instructions,user manual and GRBL software from the USB fl....
Check Stock

JUKI MO-6714S Industrial 4-Thread Overlock Sewing Machine

  • ✅Thank you! see below full info. on this machine,--- Get your sewing job done real fast with the Juki DDL-8700H sewing machine that can do up to 5500 stitches per minute. This Juki sewing machine has a large 11-inch arm space that lets you work with even large quilts. The stitch length of this 5500 SPM sewing machine goes up to 5mm which gives you a lot of freedom in doing your job..
  • ✅The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous substances, will be delivered in 3 boxes. 1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
  • ✅1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
Check Stock

NIKON NIKKOR Z 35mm f/1.8 S Wide Angle Fast Prime Lens for Nikon Z Mirrorless Cameras

  • Fast 35mm prime Lens for Z Mirrorless cameras.
  • Uncanny f/1.8 performance-extreme sharpness from the center of the frame to the edges.
  • New ultra-quiet stepping motor for silent focusing.
  • Dreamy blurred background and superior Low-light performance.
  • 5-Axis Dual detect optical VR powered by the Z Mirrorless cameras.
Check Stock

HiLetgo RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board for Arduino Mega 2560

  • The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder..
  • Can be extended to control other accessories..
  • Three field effect transistors, three heater / fan output ports, three thermistor circuits..
  • Pololu board foot socket, can be easily replaced or removed..
Check Stock

ANNOY TOOLS CNC Router Kit, All Metal 3018Pro Upgrade, 500W Spindle Motor with Limit Switch and Emergency Stop,XYZ Working Area 300 x 180 x 60mm, Wood Carving Machine

  • ⭐️Easy to use: 3018pro upgraded version, simple and sturdy construction allows you to assemble it in less than 30 minutes out of the box. Entry-level CNC engraving machine that can provide a good experience for novice as well as wood carving machine enthusiasts..
  • ⭐️Powerful power: The 3018plus body is all made of aluminum alloy, which is stronger and more stable. The spindle adopts 500W motor, different from 775 motor, which can engrave and cut more materials..
  • ⭐️open-source Grbl v1.1,which is suitable for all engraving machine control software based on the same version of GRBL. Support Windows XP, win7, win8, win10, we provide software instructions in the u disk. The package contains assembly instructions..
  • ⭐️Design: Unlike the conventional 3018/3018pro, the Z-axis has a working stroke of 60mm and more room for creation. 52mm diameter Z-axis, leaving a square slot of 40*40mm, is compatible with the laser engraving module. The machine is equipped with 6 limit switches and an emergency stop switch to provide safety for your creations..
  • ⭐️User Experience: In order to bring you a better CNC experience, 24-hour customer service is available online to answer your questions and solve your problems..
Check Stock