ReviewsJuki 760 T axis Motor

Juki Brand Lower Knife #13150701 and Upper Knife #11845807 EKONOPAK for Juki Overlock/Serger Industrial Sewing Machines

  • This Juki Genuine Part comes in a sealed Juki plastic wrapper with a UPC code.. Do not accept otherwise ..
  • Fits Juki Overlock/Serger Industrial Sewing Machines MO-3700 SERIES / MO-3600 SERIES / MO-6700 SERIES.
  • Ekonopak includes 1 knife each total of 2 knives.
  • Lower Knife Part #13150701 and Upper Knife Part #11845807.
Check Stock

CNCTOPBAOS 3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board CNC Router Engraver Milling Machine Controller Board

  • ♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • ♞【Support software】GRBL Contol/Candle(3 axis)/Universal Gcode Sender.
  • ♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
  • Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
  • ♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
  • ♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
Check Stock

Electric CNC Linear Stage Actuator Linear Rail 200mm Stroke Cross Sliding Table SFU1605 Ballscrew C7 Slide Module for CNC Engraving Machine

  • 1. Motor seat can be replaced by Handwheel.
  • 2. It can be equipped with hand wheel, stepper motor, servo motor, AC motor, DC motor.
  • 3. It can organize cross, vertical, three-axis, four-axis gantry structure.
  • 4. The cushion is added before and after the sliding table to extend the service life of the sliding table..
  • 5. The front end increases the diagonal bearing seat, the sliding table has high precision and better stability..
Check Stock

Soccer Vids Pro

  • [PRO FEATURES] Manual rings, ND filters, and 24-bit high resolution linear PCM audio recording, 4: 2: 2 10-bit internal recording, double SD card slots.
  • [WIFI LIVE STREAMING] HD live streaming supported by built-in Wi-Fi.
  • [4K RECORDING] 4K 60p recording in a small and light body with a heat-dispersing design.
  • [LEICA DICOMAR LENS] Wide-angle 25mm 24x optical zoom with 5-Axis Hybrid O. I. S (Optical Image Stabilization) and high-speed and focusing.
  • [DISPLAY / LVF] The 3.5-inch monitor (2,760K-dots) with electrostatic touch panel, plus up/down tiltable viewfinder (1,555K-dot). Simultaneous LCD output is available.
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

High Speed 400 MM 16 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

High Speed 700 MM 28 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

Kinvoca Joy Pad Controller for Nintendo Switch, L/R Switch Controller Replacement, Wired/Wireless Switch Remotes - Yellow and Green with Grip

  • One-click ReconnectThe nintendo switch pro controller can reconnect to switch console via the Home button. After the first connection is successful, you can press the Home button to reconnect each subsequent connection.
  • Motion ControlThis nintendo switch controller with 6-axis sensor provides precise gaming experience. Dual analog sticks and extended triggers to enable precise movement.The 3D rocker is made of German material and has a service life of 1 million cycles..
  • Adjustable Vibration & Built-in Dual MotorsAdjustable with 3 levels shock, 100%-75%-30%, provides excellent vibration Effect when you are playing games.T + arrow button up increases motor dynamics and T + arrow button down reduces motor dynamics..
  • Adjustable TURBO SpeedSupports 3 Turbo speeds: 5 shoots /s, 10 shoots /s, 20 shoots /s. T + - reduces TURBO speed and T + + increases TURBO speed..
  • Play & Charging TimeThis wireless switch controller built-in 600mA battery provides 10 hours of continuous game play.Charging time 2 hours with type c fast charging port..
Check Stock

AIROKA Beast SG907 MAX 4K Camera GPS Drone 5G WiFi with 3-Axis Gimbal ESC 25 Minutes Flight Profesional RC Quadcopter Drone

  • [THREE-AXIS] machanical antl-shake gimbal,three-axis-self-stabilization gimbal anti-shake and self-stabilization maintenance..
  • [DUAL CAMERAS FREELY SWITCH] Front three-axis camera and Bottom camera..
  • [BRUSIHLESS MOTOR LOW NOISE AND ENERGY SAVING] Equipped with a high-efficiency power motor,it is energy-saving and powerful,always maintain a strong....
  • [LARGE CAPACITY MODULAR BATTERY ]Drawer type modular battery,large capacity,about 25 minutes of long-lasting battery life..
Check Stock

10 Pk. Juki Genuine Bobbins #40151627 for Domestic Sewing Machines

  • Pack Of 10 Juki Plastic Bobbins For Portable Sewing Machine..
  • For Juki models : HZL-80HP, HZL-70HW, HZL-60HR, HZL-357ZP, HZL-355ZW, HZL-353ZR and more..
Check Stock

Juki 5-Pack Metal Bobbins For TL-98, TL-2000, TL-2010 Series Sewing Machine

  • Original Genuine Juki Parts (Made In Japan).
  • Juki Bobbins Come in Sealed Juki Bags with Bar Codes / Do Not Accept unsealed Bags.
Check Stock