ReviewsK Thermocouple Wire

DANOPLUS High Accuracy Digital K-Type Thermocouple Thermometer (-50~1300°C) with Dual Channels 4 Probes (Wired & Stainless Steel) Handheld High Temperature Kelvin Scale Meter Tester

Designed to work with 2 external K-Type thermocouples for high-temperature measurement ranging from -50 ~ 1300°C (-58 ~ 2372°F)..
Comes with built-in microcontroller software & dual thermocouple input terminals that enable simultaneous measurement of two samples.
Precision: Reading Accuracy (±0.1°C ±0.4) & fast response with K-Type Thermocouple Probes.
Comes with a removable silicon rubber holster to protect your device from an accidental drop.
Practical - any standard K-Type thermocouple connectors can be used to replaced the included thermocouples when it needed a replacement.

Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, or Type E thermocouple probe.
Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
Conforms to NIST standards for compliance with regulations.

Operating temperature: -40 ~ 572°F (-40 ~ 300 °C) , Accuracy: +/-1.5°F, 0.4%.
Probe Type: Sledgehammer, Diameter : 63mm , Weight: 18 lb (822g) High grade 316L Stainless steel metal, K-Type Thermocouple Probe , Polytetrafluoroethylene (PTFE) Insulator.
Wire Length : 39" (1 m) , Connector: K-Type Flat Shape Male.
Application: Plane surface temperature for Teppanyaki , Flat Frying Pan.

Operating temperature: -40 ~ 752°F (-40 ~ 400 °C) , Accuracy: +/-1.5°F, 0.4%.
Probe Type: Open hole clip, Length: 60mm, Diameter : 6.35mm , High grade 316L Stainless steel metal, K-Type Thermocouple Probe.
Wire Length : 43" (1.1m) , Connector: K-Type Flat Shape Male.
Application: This product is suitable for the detection of oven and air temperature.

Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments.
Measures temperature from 40 to Plus-550 degrees C ( 40 to Plus-1022 degrees F) with an accuracy of plus or 1 degree C (plus or 2 degrees F) for the infrared sensor and an accuracy of plus or 2 degrees C (plus or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input.
12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area.
Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F).
CE mark indicates compliance with applicable EU directives.

√ ● Dual display for Fahrenheit(F) and Celsius(C)，Range: -1999 to 9999 (depends on the input signal).
√ ● Input: Thermo Resistor: PT100, Cu50，Thermocouple: K,Wre3 ~ Wre25 ， Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC.
√ ● K type thermocouple Temperature rang:0-800℃, Sensor Dia: 4.5mm, Cable Length: 2m.
√ ● Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V.
√ ● Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet).

Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe.
Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
Stores up to 500 points of data for analysis and monitoring.
Conforms to NIST standards for compliance with regulations.

Infrared thermometer measurement range is -58 to 1202 degrees Fahrenheit (-50 to 650 degrees Celsius).
K type thermocouple measurement range is -146 to 2498 degrees Fahrenheit (-99 to 1370 degrees Celsius).
Thermometer measure is K-type thermocouple with 0 to 500 degrees F (-18 to 260 degrees C) range.
Digital thermometer automatically stores last 10 readings for recall.

Accuracy: ±0.025% of Reading + 0.25 mV | Volts Range: 0 to 10.000 V.
Accuracy: ±0.025% of Reading + 3 mV | Ohms Range: 0 to 400 Ohms.
Accuracy: ±0.025% of Reading + 0.1 Ohm | RTD3 Range: -200 to 8500 C.
Thermocouple Types: T, J, K, N, R, S | Thermocouple Range( T,J,K,R,S): -200 to 400°C.
Accuracy: ±0.025 % of Reading + 1°C |Thermocouple Range(R,S): 300 to 1760°C.
Supply Scope: 1 Unit of DBC-02 Dry Block Calibrator, Power Cable, 1 Unit of Test Lead (2 Wire), Insertion Tube: Dual Hole - 1 x 1/4” + 1 x 12.5 mm, Dual Hole - 1 x 1/4” + 1 x 8.2 mm, 1 Unit of Insertion Tool, 2no.s of 6A Spare Fuses, Instruction Manual and Factory Calibration Certificate | Applications: Calibration Labs, Pharmaceutical Divisions, Thermal Plants, Metallurgical Plants.

You will get: the package comes with 5 pieces k type thermocouple temperature probe sensors in 3 meters long, the enough quantity and length to meet your daily need.
Measurement range: the measure range of the temperature sensing line is -58 to 752 °F (-50 to 400 °C).
And the probe sensor can effect in 5 second with the accuracy degree 0.025 or 0.075.
Wide Applications: for general purpose temperature applications, the k type mini-connector is fastly response that is suitable for rapid measurement of air and gas, not suitable for liquid measurement.
Allows forming and bending of the thermocouple, so you don't need to worry about the risk of cracking.
Universal compatiblity: the thermocouple wires can compatible with most k type temperature measuring instruments, they can compatible with TM902C and TES1310.
Good insulation : the k type probe sensor is made of the fiberglass, which has good insulation, strong heat resistance and strong tensile strength.