ReviewsKapton Covered

Lanzar 12in Car Subwoofer Speaker - Black Non-Pressed Paper Cone, Stamped Steel Basket, Dual 4 Ohm Impedance, 1000 Watt Power and Rubber Suspension for Vehicle Audio Stereo Sound System - MAX12D

  • 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked magnet structure, golden input terminals and dual 4 Ohm impedance.
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 12.09".
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 90.0dB and a special designed rubber magnet boot.
  • 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

Lanzar 15in Car Subwoofer Speaker - Black Non-Pressed Paper Cone, Stamped Plastic Basket, Dual 4 Ohm Impedance, 2000 Watt Power and Foam Edge Suspension for Vehicle Audio Stereo Sound System - MAXP154D

  • 2000 WATT POWER: This car subwoofer has 2000 Watt peak power that will produce high sound resonance. It also has 100 + 100 oz. heavy double stacked magnet structure, hex key input terminals and dual 4 Ohm impedance.
  • FOAM EDGE SUSPENSION: Made with a specially treated foam edge suspension to keep equipment safe. Designed with bump & vented motor structure for durability and easy installation..
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2.5” dual-layer high-temperature Kapton voice coil to resist corrosion. It has a stamped plastic basket as well, with a sensitivity of 89dB and a specially designed rubber magnet boot.
  • 7.64” MOUNTING DEPTH: Easy to install with its 7.64” mounting depth and fits most audio systems for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

Lanzar 8in Car Subwoofer Speaker - Black Non-Pressed Paper Cone, Stamped Steel Basket, 4 Ohm Impedance, 600 Watt Power and Rubber Suspension for Vehicle Audio Stereo Sound System - MAX8 (1 pack)

  • 600 WATT POWER: This car subwoofer has 600 Watt peak power that will produce high sound resonance. It also has 50 + 50 oz. heavy double stacked magnet structure, golden input terminals and 4 Ohm impedance.
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 8.23.
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 1.5 4 layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 87.7dB and a special designed rubber magnet boot.
  • 4.96 MOUNTING DEPTH: Easy to install with its 4.96 mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

12 Inch Car Subwoofer Speaker - 700 Watt High Powered Car Audio Sound Component Speaker System w/High-Temperature Kapton Voice Coil, 88 dB, 4 Ohm, 80 oz Magnet - Pyramid PW1277X

  • 700 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 700-watt peak power / 350 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Features silver plated terminal & 4. 96” mounting depth for easy installation.
  • 2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 88 dB SPL and 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • 12-INCH P. P CONE: Pyramid follows the standard size for most car stereo systems & created this 12" new design injection-molded P. P cone driver perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet.
  • 80 OZ MAGNET STRUCTURE: This woofer speaker has an 80 oz magnet structure. The heavy-duty housing along w/ the chrome basket & bumped vented yoke plate provides a strong foundation. It is also super easy to install to your vehicle's sound system.
Check Stock

6.5\ Car Audio Speaker Midrange - 300 Watt High Power Sealed Back Mid Range Speakers System w/ Paper Coating Cone, 200-5 kHz, 93 dB, 8Ohm, 30 oz Magnet,1 inch KAPTON Voice Coil - Pyle PDMR6

  • 300 WATT POWER: This high powered audio projection midrange system has a maximum power output of 300 watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 200-5 kHz FREQUENCY RESPONSE: This easy to mount car mid range speaker is ferro fluid enhanced and has a frequency response of 200-5 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 8 OHM IMPEDANCE: The unit has 93 dB and 8ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 1" KAPTON VOICE COIL: This complete midrange features 25 oz magnet structure and 1 inch KAPTON voice coil to enhance its performance and can handle higher operating temperatures. The heavy duty housing and structure has a mounting depth of 2. 76".
  • 6. 5" STANDARD SIZE: Pyle Pro 6. 5" paper coating cone car midrange w/ sealed back design follows the standard size for most car stereo systems. Perfect for new speaker construction or replacing worn speakers in your favorite loudspeaker cabinet.
Check Stock

10 Inch Car Subwoofer Speaker - 500 Watt High Powered Car Audio Sound Component Speaker System w/ 2 Inch High-Temperature Kapton Voice Coil, 85.6 dB, 8 Ohm, 60 oz Magnet - Pyramid PW1048USX

  • 500 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 500-watt peak power / 250 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • NON-FATIGUING RUBBER SUSPENSION: The high-performance car woofer speaker has a non-fatiguing rubber suspension along w/ bumped & vented motor structure that completes your woofer enclosure system. Features 4.21” mounting depth for easy installation.
  • 2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 85.6 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • 10 INCH PAPER CONE: Pyramid follows the standard size for most car stereo systems & created this 10" black strong non-pressed paper cone driver perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet.
  • 60 OZ MAGNET STRUCTURE: This subwoofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped steel basket that provides a strong foundation. It is also super easy to install to your vehicle's sound system.
Check Stock

12 Inch Car Midbass Woofer - 700 Watt High Powered Car Audio Sound Component Speaker System w/High-Temperature Kapton Voice Coil, 35Hz-4kHz Frequency, 90 dB, 8 Ohm, 60 oz Magnet - PylePro PPA12

  • 700 WATT POWER: This high powered audio projection woofer system has a maximum power output of 700-watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 35Hz - 4kHz FREQUENCY RESPONSE: This high-performance car woofer speaker has a frequency response of 35Hz - 4kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 90 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • 12 INCH PAPER CONE: Pyle Pro follows the standard size for most car stereo systems & created this 12" woofer strong black paper cone driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet.
  • 60 OZ MAGNET STRUCTURE: This woofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped plastic basket & cloth edge suspension provides a strong foundation. It is also super easy to install to your vehicle's sound system.
Check Stock

Pyle 8 Inch Car Midbass Woofer - 360 Watt High Powered Car Audio Sound Component Speaker System w/High-Temperature Kapton Voice Coil, 200Hz-5kHz Frequency, 94 dB, 8 Ohm, 35 oz Magnet - PDMR8

  • 360 WATT POWER: This high powered audio projection midbass system has a maximum power output of 360-watt peak power / 180 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 200Hz – 5kHz FREQUENCY RESPONSE: This high-performance car midrange woofer has a frequency response of 200Hz – 5kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • KAPTON VOICE COIL: This car speaker has 1. 5” high-temperature kapton voice coil, 94 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 8 INCH PAPER CONE: Pyle Pro follows the standard size for most car stereo systems & created this 8″ midbass paper coating cone driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet.
  • 35 OZ MAGNET STRUCTURE: This mid speaker has 35 oz magnet structure. The heavy-duty housing and structure provides a strong foundation, and it is also super easy to install to your vehicle’s sound system w/ 3. 03” mounting depth.
Check Stock

6.5 Inch Car Woofer Speaker - 300 Watt High Powered White Injected Polypropylene Cone Car Audio Sound Component Speaker System w/ High-Temperature Kapton Voice Coil, 4 Ohm, 40oz Magnet - Pyramid WX65X

  • 300 WATT POWER: This high-powered audio projection woofer system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want with a style that also comes with a plastic basket.
  • BUMPED YOKE PLATE: This high-performance car woofer features a bumped yoke plate for an extended excursion. Also features vented motor structure and a specially treated black rubber edge suspension which also help give a more solid sound.
  • 1” KAPTON VOICE COIL: This car speaker has 1” high-temperature Kapton voice coil, 87.1 dB SPL & 4-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 6.5" POLYPROPYLENE CONE: Pyramid follows the standard size for most car stereo systems & created this 6.5" white injected polypropylene cone perfect for new speaker construction, replacing worn or blown speaker in your favorite loudspeaker cabinet.
  • 40 OZ MAGNET STRUCTURE: This woofer speaker has a 40 oz heavy duty magnet structure. The heavy-duty housing and structure provides a strong foundation, and it is also super easy to install to your vehicle's sound system w/ 2.76” mounting depth.
Check Stock

Car Vehicle Subwoofer Audio Speaker - 10 Inch Blue Injection Molded Cone, Blue Chrome-Plated Plastic Basket, Dual Voice Coil 4 Ohm Impedance, 1000W Power For Vehicle Stereo Sound System - Pyle PLBW104

  • 1000 WATT POWER: This 10-inch car subwoofer has a power of 500 Watt RMS to 1000 Watt peak that will produce high sound resonance. It also has silver-plated speaker terminals that will maximize sound quality while minimizing noise and distortion.
  • 70 OZ MAGNET STRUCTURE: Built with 70 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 85dB to resonate perfect clarity.
  • 2” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 2” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 5.12” MOUNTING DEPTH: Easy to install w/ 5.12" mounting depth & 10.6" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
Check Stock

Car Vehicle Subwoofer Audio Speaker - 12 Inch Blue Injection Molded Cone, Blue Chrome-Plated Plastic Basket, Dual Voice Coil 4 Ohm Impedance, 1200W Power For Vehicle Stereo Sound System - Pyle PLBW124

  • 1200 WATT POWER: This 12-inch car subwoofer has a power of 600 Watt RMS to 1200 Watt peak that will produce high sound resonance. It also has silver-plated speaker terminals that will maximize sound quality while minimizing noise and distortion.
  • 70 OZ MAGNET STRUCTURE: Built with 70 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 84dB to resonate perfect clarity.
  • 2” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 2” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 5.76” MOUNTING DEPTH: Easy to install w/ 5.76" mounting depth & 12.8" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
Check Stock