ReviewsKayak Bilge Pumps

Rule 3003.7351 Bilge Pump Motor Cartridge 700 GPH

  • Fits Rule Cartridge and Bilge Live well/Aerator pumps.
  • Fuse Protection: 5A (fuses sold separately).
  • Works with Pro-Series Live well pumps (now discontinued).
Check Stock

Rule Marine Tournament Series Livewell Pump 800 GPH

  • Fits Rule Cartridge and Bilge Live well/Aerator pumps.
  • Fuse Protection: 5A (fuses sold separately).
  • Works with Pro-Series Live well pumps (now discontinued).
Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock

Seachoice 3-Position Toggle Switch On/Off/On

  • Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more.
Check Stock

Seachoice 12101 2-Position Boat Toggle Switch – Off/On

  • Suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps.
  • Single pole, single throw off/on toggle switch.
Check Stock

Seachoice 12121 3-Position Boat Toggle Switch – On/Off/On

  • Single pole, single throw on/off/on toggle switch is suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps.
  • Inclusive of a chrome plated brass handle, mounting stem and face nut.
Check Stock

Amarine Made 3700 GPH 12v Boat Marine Plumbing Electric Bilge Pumps (3700gph 12v)

  • The Amarine-made submersible bilge pumps are tough enough for any bilge..
  • High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters / hour).
  • Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow.
  • Unique automatic “discharge” function can bear the long-term continuous operation under nearly congestion condition.
  • Impact resistant ABS housing. Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies.
Check Stock

attwood 4622-6 Tsunami Replacement Motor Cartridge, for Model T800 Pumps, 800 GPH, 12-Volt, 29-Inch Wire

  • Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
  • Reliable, self-contained unit that locks securely into the pump.
  • Installs easily, fits properly, and delivers outstanding performance.
  • Intended for use in the T800 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
  • 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stock

attwood 4620-6 Tsunami Replacement Motor Cartridge for Model T500 Pumps 500 GPH 12-Volt 29-Inch Wire

  • Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
  • Reliable, self-contained unit that locks securely into the pump.
  • Installs easily, fits properly, and delivers outstanding performance.
  • Intended for use in the T500 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
  • 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stock

Gearlab Deck Pod 2 - Kayak Deck Bag, Deckhand system (Holds Paddle Float, Bilge Pump) (Black)

  • Deck Pod 2 carries hydration, snacks, gadgets, and safety equipments organized on deck and close to hand for your kayak trips..
  • Deckhand is a revolutionary deck fastening system designed and developed by Gearlab Outdoors. It enables fast and secure attachment to kayak deck lines for quick transport and deployment..
  • Quick Access Pouch - Mesh holding pocket for quick access to navigation devices with multiple handy anchor points..
  • Newly Improved Paddle Float & Bilge Pump Access - The new lock and strap design makes essential quick access and storage easier than ever..
  • Same Big Volume, Lower Profile - 6L of storage for your hydration pouch, energy bars, and other paddling companions..
Check Stock