ReviewsKeyway Mill Cutter

45-SD-C16-D12-110L 45 Degree Chamfer indexable Mill Cutter Arbor SDMB26152 Carbide Inserts

  • if insert on the cutter: smallest diameter 12mm, biggest diameter: 23.15mm.
  • 45 degree chamfer indexable mill cutter arbor SDMB26152 carbide inserts.
  • Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert).
Check Stock

Blossoms & Steel (Seaside Pointe Book 1)

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

7pcs/Set Roughing End Mill HSS CNC 4 Flutes Milling Cutter End Mill Router Bit Roughing Chipbreaker Tool M6/M8/M10/M12/M14/M18/M20

  • MATERIAL: 4 flutes milling cutter end mill is adopted of high quality high speed steel for durable and long serving life.
  • EFFICIENCY: End mill cutter has good milling and cutting performance, ensure the high efficiency of the work..
  • HIGH QUALITY: Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
  • LONG LASTING: High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
  • APPLICATION: Cnc router bits are suitable for CNC data processing center, carved, high-speed machines.
Check Stock

45-SD-C12-D3-100L 45 Degree Chamfer indexable Mill Cutter Arbor SDMB26152 Carbide Inserts

  • if insert on the cutter: smallest diameter 3mm, biggest diameter: 12mm.
  • 45 degree chamfer indexable mill cutter arbor SDMB26152 carbide inserts.
  • https://www.amazon.com/dp/B07Z2FS4JD?ref=myi_title_dp.
  • Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert).
Check Stock

CNC End Mill Set, Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm 8pcs

  • 2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
  • Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry..
  • Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable..
  • Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
  • Package Included：8 x 4 Flutes End Mill Cutter.
Check Stock

Milling Cutter, Lightweight and Strong Metal Milling Cutter Not Easy To Break Durable Higher Accuracy for Outdoor

  • This metal mill set promises perfect milling performance and higher working efficiency..
  • 5‑piece end mill cutter set brings more convenience to the changing and renewal of cutters..
  • Through mirror polishing process, the milling cutters have a high chip removal efficiency..
  • Single blade, acute angle and incisive edge provide the quick milling with extra accuracy..
  • Made of tungsten carbide, all the cutters are not easy to break in continuous processing..
Check Stock

10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)

  • 1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
  • Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
  • Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
  • Rated speed is 3000RPM, precision less than 25 Arcmin.
  • This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

New 5 Pcs 1/2' x 1/2' x 4' HSS Square Tool Bit Lathe Fly Cutter Mill Blank M2

  • 5 Pc 1/2" x 1/2" x 4" HSS Square Tool Bit Lathe Fly Cutter Mill Blank.
  • Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
  • Tool Bits Made Of HSS Show Exceptional Results On Mild Steel, Alloys And Tools Steels.
Check Stock

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

MH GLOBAL Corner Rounding End Mill Set Shank Milling Cutter 8 PC HSS 4 Flute 1/16-3/8''

  • Wooden Box Dimension: 3-3/8 in L x 5-7/8 in W x 4 in H *Rough Estimation*.
  • Corner Rounding End Mill Set Shank Milling Cutter 8 PC HSS 4 Flute 1/16-3/8''.
  • Can Be Re-Sharpened Repeatedly Without Changing Form.
Check Stock