ReviewsKeyway Pulleys

V-Belt Power Steering Kit Replacement for Small Block Ford 289 & 302 Engines with Electric Water Pump and 4 Bolt Factory Balancer

  • Billet Aluminum V-Belt System Replacement for Small Block Ford 289 and 302 Engines with Electric Water Pump.
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
  • Includes all brackets and pulleys needed for installation. Does NOT included Electric Water Pump, Power Steering Pump, or Alternator.
  • Uses 4 Bolt Factory Damper and Saginaw Style Power Steering Pump with Keyway Shaft.
  • Will not work with 351W Engines or 3 bolt factory dampers or aftermarket dampers. We do offer kits for all of these options however..
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

Stanley Hardware S828-202 CD8822 All-Weather Padlock in Solid Brass

  • Solid Brass Body Is Corrosion Resistant Under Virtually Any Condition.
  • Molded Rubber Cover Protects Keyway From The Elements.
  • Solid brass, non-shrouded body with stainless steel removable shackle for corrosion resistance.
  • Molded rubber keyway cover with rotating keyway to protect against drilling.
  • Dual stainless steel ball-bearings resist pry attacks.
  • Commercial 6 pin cylinder with anti pick pins.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Garage Door Extension Spring Pulley Sheave Kit +SAFETY CABLES & INSTRUCTIONS (1set）

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

Lisle 39000 Pulley Puller

  • The unique puller body completely houses the pulley hub to prevent slipping on even the tightest pulleys.
  • Works on traditional V-shaped pulleys and serpentine belt system pulleys.
  • Also works faster than other conventional pulley pullers.
  • Fits most domestic models including GM 3.1 and Quad 4 engines.
Check Stock

Hayden Automotive 5980 Idler and Belt Tensioner Pulley

  • These pulleys assist in belt routing and tensioning within the accessory drive system. Air conditioning compressors, alternators, power steering pumps, and water pumps are aided by the function of Idler Pulleys. All Idler Pulleys are of the highest quality and meet or exceed OE specifications..
  • Extends belt and accessory drive bearing life.
Check Stock

Garage Door Extension Spring 27x48x220 for 8' High Doors 220LB Green (Qty 2)

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

OTC 6613 Variable Pin Spanner Wrench

  • OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
  • Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
  • Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
  • Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock