ReviewsKneeboard Tie downs

Boat Tie Down Straps to Trailer | Boat Transom Tie Down Straps Made in New Zealand with Superior Strength of 2,400lbs UV Treated | 1\ x 2.5’ Heavy Duty Ratchet Boat Straps Trailer Tie Down (Pack of 2)

  • Quality Boat Trailer Straps & PWC Trailer Tie Down - Aerofast started manufacturing transom tie down straps over 40 Years ago in New Zealand. These transom straps were designed specifically as boat trailer straps and tie downs. These transom straps for boat are a single-piece boat ties with the webbing permanently fed through the ratchet, allowing for quick and easy setup..
  • Superior Break Strength - 2,400lbs per boat tie down strap or 4,800lbs as a pair. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
  • Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
  • Made in New Zealand - Our boat trailer transom tie down....
Check Stock

Boat Tie Down Straps to Trailer (Pack of 2) - 2,400lbs Break - 1" x 2.5’ Heavy Duty Ratchet Boat Straps - UV Treated Boat Transom Tie Down Straps - Jet Ski Tie Down Straps - Made in New Zealand

  • Quality Boat Trailer Straps & PWC Trailer Tie Down - Aerofast started manufacturing transom tie down straps over 40 Years ago in New Zealand. These transom straps were designed specifically as boat trailer straps and tie downs. These transom straps for boat are a single-piece boat ties with the webbing permanently fed through the ratchet, allowing for quick and easy setup..
  • Superior Break Strength - 2,400lbs per boat tie down strap or 4,800lbs as a pair. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
  • Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension a....
Check Stock

Jetski Ratchet Strap Tie Down Strap - Made in NZ - 1\ x 8\’ Heavy Duty Tiedown with Floating PVC Hook - for Jetskis, Seadoo, Waverunner & PWCs - 1,800lbs Break Strength - 1 Strap (Blue)

  • ...manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn imported from Spain. This means no damage from the sun. We use Thicker webbing for durability and heat seals to prevent and minimise fraying. You are buying directly from the manufacturer. These Jet Ski Tie Downs are designed for the tough USA conditions and made to last. We make the best sea toy accessories and do not compromise on quality.
  • QUALITY JETSKI, WAVERUNNER, PWC TIE DOWN KIT - These Tie Downs were designed specifically for Jetskis and Watercraft. They include a 3rd Hook for three point attachment, enables extra secure transport for your Jetski, Wave runner or Sea Doo on your trailer . These Tie Downs are designed with a Heavy duty rubber protector, permanently positioned behind the rachet to avoid damage to your watercraft..
  • SUPERIOR BREAK STRENGTH - The Break Strength for this product is 1,800lbs. Our Marine Tie Downs feature Polypropylene Yarn which does not stretch or lose its strength when wet - important for marine tie downs. All of our Tie Downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards of durability, giving you peace of mind that your Boat, Jetski or Watercraft is saf....
Check Stock

Mega Cargo Control 2” x 30’ Tie Down Double Wire J Hook Ratchet Straps for Trucks, Trailers & Powersports (Black, 1 Pack)

  • ⭐ 1 PACK BLACK TIE-DOWN RATCHET STRAPS - with Double Wire J Hook End Fittings are 2 Inches x 30FT Long. These Tie-Down Straps are one of the most go-to Tie-Down Assembelies as They Secure Perfectly on a Flatbed Trailer. Both of Tie-Down Double Wire J Hooks and Flat Hook Tie-Down Secure perfectly on Tow Trucks, utility trailers, flatbed trailers, truck, and compatible to Tie-Down Items such as Motorcycles Sand Rails, Canoes and Kayaks and many other types of Powersport vehicles..
  • ⭐ TIE-DOWN STRAPS WITH DOUBLE J HOOK END FITTINGS - These Extremely Heavy-Duty Tie-Down Straps are crafted with Industrial Grade Webbing using High tensile polyester tie down webbing of 12000 LBS webbing. It’s Special and reinforced weaving patterns make our tie-down assemblies last longer than competitors. With added coating on the webbing- to ensure the webbing is durable for everyday use..
  • ⭐ STURDY, STRONG + SECURE - These Tie Down Straps with Ratchet Buckles Fits with various applications. These Working Load Limit of 3333 LBS Cargo Tie Down Hauling straps are the best secured trailer and trucking accessories that put saftey and priority first. It is stamped on the warning label tag and stenciled through out the assemblies for easy inspection. ✔✔SOME STRAPS MAY C....
Check Stock

Protection Padded Sleeve Straps for Tie Downs by Aerofast. Ratchet Sleeve to Prevent Damage to Your Boat, Jetski, or Waverunner, 4 x 12 Inches. Pack of 2 - Red

  • Multi-Purpose Ratchet Strap Protector - Can be used as an alternative to tie down corner protector on most types of straps that are up to 2.5" wide (6.35cm). These sleeve strap allow for easy repositioning. Simply move up and down tie down strap to suit..
  • Designed For Ultimate Protection During Transport - Protect your webbing with the heavy duty alternative to the fleece tie down cover with this padded tie down strap. Preventing sharp edges or rough surfaces cutting your tie down's webbing or your tie down from scratching your boat, jetski, or waverunner hull, or other precious cargo. The protective sleeves have internal padding for extra protection..
  • Easy To Use Ratchet Strap Protector Sleeve - Protect loads from the ratchet by positioning the ratchet in the centre of the protective sleeve. Designed for use with boats, kayaks, jetskis, PWCs, etc, the protective sleeve can be used to protect most loads and cushions from rubbing of the tie down strap..
  • Made With Quality Durable Materials - High Grade Oxford Polyester Fabric with Heavy Duty Padding to cushion and act as a protector against damage. Reinforced hems are sewn into all edges, to ensure that these tie down sleeve covers last for many years..
  • The Aerofast Guarantee - We live and breathe tie down....
Check Stock

Tie Down Strap Rings Tie-Down Anchors Hooks Stainless Steel Lashing Rings with Red Powder Coating for Tiedown Attachment Points for Dirt Bike, Motorcycle, Trailer, Pickup, Truck,Camper,RV (Pack of 10)

  • ✅【Say Goodbye to Fussy Method】- If you ever have had to tie your motorcycle down to transport it, you used your handlebars to attach the tie down hook. Then, when you untie your motorcycle, you notice scratch marks all over you handle bars from the metal hooks. Sometimes we have also seen other riders who mess up their throttle or clutch cables because they accidentally got the metal tie down hook on top of the cable instead of the handlebars..
  • ✅【Good Items】- Now there is a better way. By installing Tie Down Strap Ring on the fork clamp you get a very secure anchor point to attach the tie down hook. Once installed they are out of the way and add almost no weight to your motorcycle. With dirt bike tie down rings, you just hook one end of the tie downs to this eyelet, and the other end hook to the anchor on your truck bed - make loading and unloading so much easier, especially with only one person!.
  • ✅【Good Addition】- 10 Pack tie down anchors hooks can be easily installed almost anywhere there is a bolt, and support up to a 3/8" or 10mm hardware. You can use them to anchor any tie-downs, like ropes, bungee cords, truck bed cargo nets or stra....
Check Stock

Stainless Boat Tie Down Straps to Trailer (Pack of 2) - 2,400lbs Break - 1" x 4’ Heavy Duty Ratchet Boat Straps - UV Treated Boat Transom Tie Down Straps Jet Ski Tie Down Straps - Made in New Zealand

  • Quality Boat Trailer Straps & PWC Trailer Tie Down - Aerofast started manufacturing stainless steel transom tie down straps over 40 Years ago in New Zealand. These transom straps were designed specifically as boat trailer straps and tie downs. These transom straps for boat are a single-piece boat ties with the webbing permanently fed through the ratchet, allowing for quick and easy setup..
  • Superior Break Strength - 2,400lbs per boat tie down strap or 4,800lbs as a pair. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength, giving you peace of mind that your Boat, Jetski or Watercraft is safely secured to your trailer..
  • Stainless Steel Quality & Superior Break Strength 2,400lbs per boat tie down strap - 304 Grade Stainless Steel Ratchet, provides added durability around salt water environments. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength....
Check Stock

JCHL Stainless Steel Tie-Down Anchors Hooks Multi-Purpose Dirt Bike Tie Down Strap Rings for Motorcycle Dirtbike ATV Trailer Truck Rosa-Gold (10-Pack)

  • The multi-purpose tie-down hooks made from high quality stainless steel and are corrosion resistant that will not rust, Our Tie down Strap Rings allow you to attach tie-downs almost anywhere there is a bolt..
  • Multi-Purpose Tie-Down Anchors Hooks, The tie down rings widely used as a tie-down anchor for atv on off-road vehicles, bicycles, coolers, ladders, kayaks, motorcycles, and even trucks, trailers or campers..
  • The small round circle Allows the customer to attach tie-downs almost anywhere there is an 8.5mm or smaller bolt.The larger oval ring is 15mmx18mm..
  • Our Stainless Steel Multi-Purpose Tie-Down Anchors Lightweight and strong, these rings will connect to your bike easily and make the process of loading and unloading your bike a breeze..
  • JCHL Team strive to provide you highest quality products and best service, 100% satisfaction guarantee..
Check Stock

MYGOFLIGHT iPad Mini 4 and iPad Mini 5 Polycarbonate Pilot Kneeboard and Mountable Everyday Case – Compatible with MGF Yoke and Suction Cup Sport Mounts and Sport Adapters

  • VERSATILE – iPad Mini 4 and Mini 5 case can be used as a pilot’s kneeboard, mounted on a variety of MGF cockpit, windshield, window, or yoke mounts, and used as an everyday tablet case. This is especially useful for pilots flying multiple aircraft, or drivers and truckers driving multiple vehicles. This one case eliminates the need for multiple cradles and cases for your device. Easily take your iPad from air to office to home. Compatible with Apple Pencil..
  • KNEEBOARD – The included removable wide Velcro knee strap and two aluminum rails on the underside of the case allows the case to be held securely and comfortably to your leg providing a stable mount and one-handed operation. Once the strap is removed, the kneeboard becomes a sleek iPad case for everyday use. Four rubber pads on the rails allow the case to sit securely on a desk or table..
  • GEN 3 SPORT MOUNT COMPATIBLE – The round male connector on the backside of the case quickly, easily, and securely joins with the Gen 3 adapter end on MGF Yoke and Suction Cup Sport Mounts. The connection allows 360° rotation of the device and quick and easy removal: just press both green buttons on the mount at the same time and pull. That also allows the mount to remain installed in place. Mounts are sol....
Check Stock

Byredio Bed Tie Down Anchors for Ford F150 F250 F350 2015-2021 Truck Cargo Bed Tie Downs Boxlink Cleats with Plates, Replacement for FL3Z99000A64B FL3Z-9928408-AB

  • ✅PREMIUM MATERIAL – These f150 bed tie downs are constructed of die-cast zinc with stainless steel lock assembly and heavy-duty ABS plastic housing for durability, reliability, and sturdiness. The f150 tie down anchors feature water-resistant and corrosion-resistant features perfect for all weather..
  • ✅FOR FORD TRUCKS – This f150 box link replace OE# FL3Z99000A64B or FL3Z-9928408-AB. For 2015-2021 Ford F150 F250 F350 and Raptor Truck Models. It is a direct replacement if your part number is the same, a better option than the Ford original parts. Please make sure your model before purchasing.
  • ✅MUST-HAVE FOR TRUCK – 4 ford box links bearing about 1,000 pounds. You can attach a rope, net, or any other material on these f150 tie downs to ensure that your precious load gets to its destination without falling or damaging. These f150 box links are ideal to add tie-down points for a truck and let you far away from cargo’s swing and noise..
  • ✅ANTI-THEFT – The f150 bed tie downs also comes with 4 stainless steel locks and keys. The F150 tie down anchors secure and holds the things on the inside of your truck bed tightly for additional cargo tie-down points. It can be used with the locking tie-down cleat, tie-down hooks strap, etc together. It....
Check Stock

ZUP DoMore Board All-in-One Performance Board with Tow Hook, Trainer Board, Wakeboard, Kneeboard and Water Skis for Water Sports, Boating, WyGuy

  • ALL-IN-ONE BOARD: DoMore board serves as a wakeboard, kneeboard, and water skis to provide fun for everyone on the water.
  • INTEGRATED HANDLES: Built-in handle hook and molded side handles allows riders to start, move to a kneeling position, or move to a standing position without worrying about holding onto the handle.
  • VERSATILE FOOT STRAPS: Slip-in foot straps also serve as elbow and knee pads if board is used as a wakeboard, tube, or kneeboard.
  • ALL-SKILL LEVELS: Everyone will be able to have fun on this board - from beginners who can't quite catch their footing to advanced riders surfing across waves without grabbing the handles.
  • EASY TO USE: Designed to accommodate riders of all ages and ability levels with excellent stability and control.
Check Stock